Instruction/ maintenance manual of the product B212/B215 Behringer
Go to page of 8
EUROLIVE B212/B215 Version 1.2 May 2006 User ’ s manual.
2 EUROLIVE B212/B215 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this device near water . 6) Clean only with a dry cloth.
3 EUROLIVE B212/B215 B212/B215 500/600-Watt 2-Way PA Speaker System with 12"/15" Woofer and 1.75" Compression Driver V High-power 2-Way PA sound reinforcement speaker system for live an.
4 EUROLIVE B212/B215 1. INTRODUCTION Thank you very much for expressing your confidence in BEHRINGER products by purchasing the EUROLIVE B212/B215. This extremely compact loudspeaker has been designed specifically for those applications in which space is a problem.
5 EUROLIVE B212/B215 1.1.2 Initial operation Your B212/B215 speakers are connected to a power amplifier using the speaker connectors located in the back. Please read ch. 4, “ADDITIONAL CONSIDERATIONS” and ch. 5, “APPLICATION EXAMPLES” to get important technical information and practical suggestions about use.
6 EUROLIVE B212/B215 3.4 Loudspeaker protection by using a low-cut filter Try to prevent damage to your speakers caused by extreme oscillation of the bass membrane due to subsonic noise and extremely deep frequencies. Use an equalizer to cut off those frequencies that fall below your speakers’ frequency range, or use a low-cut/high-pass filter.
7 EUROLIVE B212/B215 5.3 Stereo operation with a subwoofer Using a crossover, the main output signal of a mixing console is split into a stereo signal and a mono signal. The mono signal covers the lower frequency range and the stereo signal covers all other frequency ranges.
8 EUROLIVE B212/B215 T echnical specifications and appearance subject to change without notice. The information contained herein is correct at the ti me of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners.
An important point after buying a device Behringer B212/B215 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer B212/B215 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer B212/B215 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer B212/B215 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer B212/B215 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer B212/B215, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer B212/B215.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer B212/B215. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer B212/B215 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
