Instruction/ maintenance manual of the product P755D Toshiba
Go to page of 221
User ’ s Manual Satellite P750/P755/P750D/P755D Series.
User ’s Manual ii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii Satellite P750/P755/P750D/P755D Series Lef t side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iv Satellite P750/P755/P750D/P755D Series Generating ASCII characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Chapter 6 Power and Power-Up Modes Power conditions . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual v Satellite P750/P755/P750D/P755D Series LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3 Graphics Processing Unit ("G PU") . . . . . . . . . . . . . . . . . . .
User ’s Manual vi Satellite P750/P755/P750D/P755D Series Copyright © 201 1 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be repro duced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual vii Satellite P750/P755/P750D/P755D Series WinDVD and Corel Digital S tudio are trademarks or registered trademarks of Corel Corporations. Manufactured under license fro m Dolby Laboratories. Dolby an d the double-D symbol are trad emarks of Dolby Laboratories.
User ’s Manual viii Satellite P750/P755/P750D/P755D Series FCC information FCC notice "Declaration of Conform ity Information" This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules.
User ’s Manual ix Satellite P750/P755/P750D/P755D Series EU Declar atio n of Confor mity This product is carrying the CE-Ma r k in accordance wi th the related European Directives. Responsibl e for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Ge rman y .
User ’s Manual x Satellite P750/P755/P750D/P755D Series The consequences of the use of this product in non-approved wo rking environments may be: ■ Interference with other devices or machines in the near surro unding area.
User ’s Manual xi Satellite P750/P755/P750D/P755D Series V ideo St andard Notice THIS PRODUCT IS LICENSED UNDER THE A VC, THE VC-1 AND MPEG-4 VISUAL P A TENT PORT FO LIO LICENSE FOR THE PERSONAL AND.
User ’s Manual xii Satellite P750/P755/P750D/P755D Series Disposal of batteries a nd/o r accumulators Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government.
User ’s Manual xiii Satellite P750/P755/P750D/P755D Series Optical disc drive safety instructions T OSHIB A Samsung Stora ge T echnology ■ DVD Super Multi TS-L633F/TS-L633W Be sure to check the precautions at the en d of this section. ■ The optical disc drive model employs a laser system.
User ’s Manual xiv Satellite P750/P755/P750D/P755D Series Sony Optiarc Inc. ■ DVD Super Multi AD-7710H/AD-7713H Panasonic System Networks ■ BD-Combo UJ141 ■ BD-Writer UJ240 HIT ACHI-LG Da ta Storage, Inc.
User ’s Manual xv Satellite P750/P755/P750D/P755D Series ■ BD-Combo CT31F ■ BD-Writer BT1 1F Precautions Hitachi-LG Data Storage, Inc. 22-23,KAIGAN 3-CHOME, MINA TO-KU,T OKYO,108-0022 JAP AN CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .
User ’s Manual xvi Preface Congratulations on your purchase of th is computer . This powerful notebook computer provides excellent expans ion capability , includes multime dia functionality , and is designed to prov ide years of reliable, high-pe rformance computing.
User ’s Manual xvii Satellite P750/P755/P750D/P755D Series Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l al so us es icons to iden ti fy th e co mponent s it is providi n g in formation on. Keys The keyboard keys are used in th e te xt to describe many computer operations.
User ’s Manual xviii Satellite P750/P755/P750D/P755D Series T erminology This term is defined in this document as follows: Star t The word " Sta rt " refers to the " " button in Windows 7. HDD or Hard disk drive Some models are equipped with a "Soli d St ate Drive (SSD)" instead of a hard disk drive.
User ’s Manual xix General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever, certain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xx Satellite P750/P755/P750D/P755D Series T o keep your compute r in prime ope rati ng cond ition, protect your work area from: ■ Dust, moisture, and direct sunlig ht. ■ Equipment that generate s a stro ng electromagnetic field, such as stereo speakers (other tha n speak ers that are connected to the computer) or speakerphones.
User ’s Manual xxi Satellite P750/P755/P750D/P755D Series Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system. The operation of the computer wil l not be impa ired in any way , but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use.
User ’s Manual 1-1 Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , taking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndo ws ® operating system and uti lity sof tware are pre- installed. ■ Windows 7 ■ TOSHIBA V alue Added Package ■ TOSHIBA HW Set.
User ’s Manual 1-3 Getting S tarted Getting St arted This section provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening .
User ’s Manual 1-4 Getting S tarted Connecting the A C ada ptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-5 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the right of the computer .
User ’s Manual 1-6 Getting S tarted 3. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the computer should glow . Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing.
User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Powe r-Up Modes fo r more information.
User ’s Manual 1-8 Getting S tarted Figure 1-5 T urning on the po wer St arting up for the first time The Windows 7 S tartup Screen will be the first screen displayed when you turn on the power . Fo llow the on -screen instructions on each screen in order to properly inst all the operating system.
User ’s Manual 1-9 Getting S tarted 3. Click Start . 4. Click the Shut down button ( ). 5. T urn off any peripheral devices connected to your computer . Sleep Mode If you have to interrupt your work, you are able to tu rn off the power without exiting from your software by placing the computer into Sleep Mode.
User ’s Manual 1-10 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 1-1 1 Getting S tarted Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to st atic electricity or electrical noise.
User ’s Manual 1-12 Getting S tarted Automatic Hibernation Mode The computer can be configured to ent er Hibernation Mode auto matically when you press the power button or clos e the lid. In order to define these settings, you can follow the steps as described below: 1.
User ’s Manual 1-13 Getting S tarted System Recovery Opti ons There is a hidden partition allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the syst em in th e event of a problem.
User ’s Manual 1-14 Getting S tarted System Recovery This section describes the creation of Recovery Media an d their use. Creating Recovery Media This section describes how to crea te Recovery Media.
User ’s Manual 1-15 Getting S tarted 5. After Recovery Media Creator starts , select the type of media and the title you wish to copy , and then click the Create button. Restoring the pre-in st alled sof tw are from the Reco very hard disk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition.
User ’s Manual 1-16 Getting S tarted Restoring the pre-inst alled sof tw are from your crea ted Re covery Media If the pre-installed files are damaged , you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it.
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous compon ents of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. * Provided with some models. Product appearance depends on t he model you purchased.
User ’s Manual 2-3 The Grand T our Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vent s. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious inju ry .
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. Product appearance depends on th e model you purchased. Figure 2-3 The right side of the computer Please note that it is not possible to confir m the operation of all functi ons of all USB devices th at are available .
User ’s Manual 2-5 The Grand T our Back The following figure shows the comp uter ’s back. Figure 2-4 The back of the compu ter Underside The following figure shows the undersi de of the computer . Y ou should ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage.
User ’s Manual 2-6 The Grand T our Product appearance depends on th e model you purchased. Figure 2-5 The underside of the computer 1. Battery lock 4. Cooling vents 2. Battery release latch 5. Memory module slot 3. Battery pack Battery lock Slide the battery lock to release the battery pack ready for removal.
User ’s Manual 2-7 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. * Provided with some models.
User ’s Manual 2-8 The Grand T our Web Camera Web Camera is a device that allows you to record video or take photographs with you r computer . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenge r .
User ’s Manual 2-9 The Grand T our Keyboard Y our computer may intergrated with two kinds of keyboards: A4 size keyboard which provi des the embedded numeric over lay keys, de dicated cursor control overlay keys, and Keys; full size keyboard which provid es dedi cated numeric keys, dedicated cu rsor control keys, and Keys.
User ’s Manual 2-10 The Grand T our Function buttons This section describes the buttons of the front operation panel in Windows mode. Seven buttons are av ailable for use: eco, Wireless On/Off, Programmable button (or 3D, dep ending on the model you purchased), CD/DVD Play/Pause, Mute, V olume -, Vo lume+.
User ’s Manual 2-1 1 The Grand T our Programmable button Some models are provided wi th Programmable button. T ouching this button to launch Bulletin Board. When Bulletin Board is lauched, this button allows you to display Bulletin Board on top, or switch between ava ilable Boards.
User ’s Manual 2-12 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators below their re spective icons, glow when specific computer operations are in progress.
User ’s Manual 2-13 The Grand T our Keyboar d indi cat ors Full size keyboard The following figure shows the positions of th e CAPS LOCK indicator and the NUM LOCK indicator , which show the following conditions: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed.
User ’s Manual 2-14 The Grand T our Optical disc drives The computer is configur ed with a DVD Super Mu lti drive, BD-Writer or BD- Combo drive. When the computer is accessin g an optical disc, an indicator on the drive glows. W r it able discs This section describes the type s of writable discs.
User ’s Manual 2-15 The Grand T our Y ou can use you r Remote Controller with Media Center to play CDs, DVDs, BDs and videos, and view pictures. The Remote Controller helps you navigate through Media Center just as a cable TV remote control n avigates cable TV options or controls the playback of a movie in a VCR or DVD player .
User ’s Manual 2-16 The Grand T our Figure 2-12 Remote Controller Power St art s or terminates the oper ating system. This button functions like the Power button of your computer . By default, th e Sleep Mode is equivalent to the Power Off state of your computer .
User ’s Manual 2-17 The Grand T our Arrows and OK Arrows: Moves the cursor to navigate within Media Center windows. OK: Selects the desired action or window option.
User ’s Manual 2-18 The Grand T our Using the Remote Contro ller Some computers include a remote contro l unit, which allo ws you to control some of your computer ’s functions from a distant location. Operational ran ge of the Rem ote Con tro ller Point the Remote controller at your computer and press a button.
User ’s Manual 2-19 The Grand T our Inst alling/Repla cing batteries Be sure to install the provided batteries before using the remote controller . When the batteries shipped with the Remote Controller are disch arged, replace them with commercially availab l e CR2032 batteries.
User ’s Manual 2-20 The Grand T our Inst alling the batte ry 1. Open the battery cover on the back side of the remote contro ller. 2. Slide the battery out of battery case. Figure 2-14 Installing/Replacing the battery 3. Insert the new battery in place.
User ’s Manual 2-21 The Grand T our Figure 2-16 The AC adaptor (3-pin plug) NVIDIA ® 3D VISION™ NVIDIA ® 3D Vision™, which is provi ded with some models, enables 3D Vision feature on your computer . Some individuals may experience health -related complications when exposed to certain 3D images.
User ’s Manual 2-22 The Grand T our 3D vision glass Some models are provide d with a 3D vision glass. Figure 2-17 3D vision glass 1. IR receiver 4. USB connection 2. ON button 5. Nose piece 3. Indicator light IR receiver Do not block this side of your glasses.
User ’s Manual 2-23 The Grand T our Setup 3D V ision Before starting 3D V ision Setup, Network settings should be done to se e some information at W eb site. 1. Launch the 3D Vision Setup by clicking on St art -> All Programs -> NVIDIA Corporation -> 3D Vi sion -> Enab le 3D V isio n .
User ’s Manual 2-24 The Grand T our 7. Setup complete. Congratulations! Y ou are now rea dy to see in stereo scopic 3D! For detailed information on the NVIDIA Cont rol Panel, refer to the 3D Vision User Guide available from www .nvidia.com/3dvision .
User ’s Manual 3-1 Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor CPU The processor type varies depending on model.
User ’s Manual 3-2 Hardware, Utilities and Options Memory Power Memory slots 1 GB, 2 GB or 4 GB memory modules can be installed in the computer's two memory slots for a maximum of 8 GB system memory . This computer can be equipped with memory modules of a maximum size of 8 GB.
User ’s Manual 3-3 Hardware, Utilities and Options Disks Legal Footnote (Battery Life) For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix F . RTC battery The internal RTC battery backs up the Real T ime Clock (RTC) and calendar .
User ’s Manual 3-4 Hardware, Utilities and Options Optical disc drive Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability .
User ’s Manual 3-5 Hardware, Utilities and Options This feature can be used if the computer is: ■ running under battery mo de ■ using the internal LCD display only The V ari-Bright feature can be enabled in the Catalyst Control Center .
User ’s Manual 3-6 Hardware, Utilities and Options For more information about the NVIDIA Control Panal system, please refer to the NVIDIA Control Pane l Help.
User ’s Manual 3-7 Hardware, Utilities and Options Communications Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 3-8 Hardware, Utilities and Options Hot keys Hot keys are specific key combinations that let you quickly change the system configuration directly from the keyboard without running a system program.
User ’s Manual 3-9 Hardware, Utilities and Options Heat dispersal *1 T o protect from overheating, the C PU has an internal temperature sensor . If the comp uter ’s internal temperature rises to a certain level, the cooling fan is turned on or the processing spee d is lowered.
User ’s Manual 3-10 Hardware, Utilities and Options T OSHIBA V alue Added Package This section describes the TOSHIBA Component features pre-installed on the computer . USB W akeup function This function restores the computer from Sleep Mode depending on the external devices connected to the USB ports.
User ’s Manual 3-1 1 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, please refer to each utility's online manu al, help files or README.
User ’s Manual 3-12 Hardware, Utilities and Options TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to ve rify the face da ta of users when they log in to Win dows. If the verification is successful, the user will be logged into Windows automatica lly .
User ’s Manual 3-13 Hardware, Utilities and Options TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides access to specific tools, utiliti es and applications that make the use and con figuration of the computer easier .
User ’s Manual 3-14 Hardware, Utilities and Options Corel Digital Studio for TOSHIBA Corel Digital S t udio for TOSHIBA allows users to instantly create Blu-ray disc movie, DVD-Video or slideshow discs via a user-friendly wizard interface w it h speci f ic task orie nt e d fe at ures.
User ’s Manual 3-15 Hardware, Utilities and Options TOSHIBA Resolution+ Plug-in For Wind ows Media Player The plug-in lets you upconverts wmv and mp4 videos on Windows Media Player. For more informa tion, please refer to the TOSHIBA Resolution+ Plug-in for Windows Media Player Help.
User ’s Manual 3-16 Hardware, Utilities and Options TOSHIBA S peech System The TOSHIBA S peech System consists of a voice-composition applic ation (text-to-speech) that analyzes documents and reads them aloud, and a speech-recogni tion application that recognizes the word s you speak into a microphone.
User ’s Manual 3-17 Hardware, Utilities and Options TOSHIBA Service Stat io n This application a llows your computer to automatically search for TOSHIB A software updates or other alerts from T OSHIBA that are specific to your computer system and its programs.
User ’s Manual 3-18 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility .
User ’s Manual 3-19 Hardware, Utilities and Options Figure 3-1 Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 3-20 Hardware, Utilities and Options ■ The maximum capacity of SD memo ry cards is 2GB. The maximum capacity of SDHC memory cards is 32GB. Memory media format New medi a cards are f ormatted accordin g to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards.
User ’s Manual 3-21 Hardware, Utilities and Options Memory card care ■ Set the write-protect switch to the lock position, if you do not want to record data. ■ Memory cards have a limited lifespan, so it is important to backup important data. ■ Do not write to a card if the battery p ower is low .
User ’s Manual 3-22 Hardware, Utilities and Options Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow the steps as detailed below: 1. Open the Safely Remove Hard war e and Eject Media icon on the Windows T askbar.
User ’s Manual 3-23 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the po w e r section in Chapter 1, Getting S t arted if required).
User ’s Manual 3-24 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it of f. Figure 3-3 Removing the memory module cover 7.
User ’s Manual 3-25 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with one scre w . Figure 3-5 Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes, if required.
User ’s Manual 3-26 Hardware, Utilities and Options 1 1. Turn the computer on and make su re the added memory is recognized - to confirmed it, St art -> Control Panel -> System a nd Security -> System icon. Removing a memory module T o remove the memory module, follow the steps as detailed below: 1.
User ’s Manual 3-27 Hardware, Utilities and Options Figure 3-6 Removing the memory module 9. Seat the memory module cover in place and secure it with the screw . 10. Install the battery pack - refer to Replacing the batte ry pack section in Chapter 6, Power and Powe r-Up Modes, if required.
User ’s Manual 3-28 Hardware, Utilities and Options Connecting the monitor cable 1. Connect the monitor cable to the External RGB monitor port. Figure 3-7 Connecting the monitor cable to the External RGB monitor port 2. T urn the external monitor's power on.
User ’s Manual 3-29 Hardware, Utilities and Options HDMI Devices An HDMI monitor can be connected to the HDMI out port on the comp uter . T o connect monitor , follow the steps as det ailed below: Connecting the HDMI out port 1. Plug one end of the HDMI cable into the HDMI out port of the HDMI device.
User ’s Manual 3-30 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to configure the fo llowing settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1.
User ’s Manual 3-31 Hardware, Utilities and Options *As not all 3D televisions’ port operations have been fully tested yet, NVDIA ® 3DTV Play feature may not be functional on some 3D television models. 1. Connect to a television which supports 3D.
User ’s Manual 3-32 Hardware, Utilities and Options T o use the 2Dto3D conversion feat ure of TOSHIBA V ideo Player , th e following operation is required before playing DVD by TOSHIBA Video Player . 1. Click St art -> Cont rol Panel -> Hardware and Sound -> NVIDIA Control Panel .
User ’s Manual 3-33 Hardware, Utilities and Options USB Device A device corresponding to USB 3.0 standards can be co nnected to the USB 3.0 port on the comp ut er . A device corresponding to USB 2.0 standards can be co nnected to the USB 3.0 or USB 2.
User ’s Manual 3-34 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft.
User ’s Manual 3-35 Hardware, Utilities and Options Optional accessories Y ou are able to add a numb er of options and accessories in order to ma ke your computer even more powerful and convenient to use .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move yo ur fingertip across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics Using the Fingerprint Sensor This product has a fingerp rint uti lity installed for the purpose of en rolli ng and recognizing fingerprints. By enrolling the ID and password onto the fingerprint authenticati on feature, it is no longer nece ssa ry to input the password from the keyboard.
User ’s Manual 4-3 Operating Basics How to Sw ipe your Finger Using the following steps when swiping fin gers for fingerprint registration or authentication will help to mi nimi ze authenticati on failures: Align the first joint of the fi nger to the center of the se nsor .
User ’s Manual 4-4 Operating Basics ■ Do not paste stickers or write on the sensor . ■ Do not touch the sensor with a fing er or any other object which ma y have a build-up of static electricity on it. Observe the following before you place your finger on the sensor whether for fingerprint enro llment/registration or reco gnition.
User ’s Manual 4-5 Operating Basics Point s to note about Fingerprint U tility ■ If Windows 7 file encryption function EFS (Encryption File System) is used to encrypt a file, the file cannot be further encrypted usi ng the encryption function of th is software.
User ’s Manual 4-6 Operating Basics 5. The scanning practice screen is displayed. Y ou are able to practice swiping (three times) your finger to ensure you use the co rrect method. When you have finished practi cing swip ing your finger , click Next .
User ’s Manual 4-7 Operating Basics 6. "Are you sure you want to delete all fi ngerprints?" message box will ap pear on the screen. Cli ck OK . 7. Click Close . 8. "Are you sure you want to quit?" is displayed. Click OK . It will be returned to the TOSHIBA Fingerprint Utility main menu.
User ’s Manual 4-8 Operating Basics Overview about Fingerprint Single Sign-on feature This is a feature that allow s the user to complete the authentica tion for both the User/BIOS Password (and, if ap plicable, the HDD (Hard Disk Drive) Password) and logging onto Windows using only one fingerprint authentication when booting up.
User ’s Manual 4-9 Operating Basics Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or vide o conferences using a communication tool such as Windows Live Messenger .
User ’s Manual 4-10 Operating Basics Using the T O SHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-1 1 Operating Basics ■ The Registration screen is displayed for a logged-in user whose face has not be en registered. ■ The Management screen is displayed for a logged-in user whose face has already been registered. 2. Click Run as administr ator in lower left of the Ma nagement screen, and then click the Register button.
User ’s Manual 4-12 Operating Basics How to Dele te the Face Re cognition D at a Delete image data, account information, and personal record data created during registration. T o delete the Face Reco gnition Data, follow the steps as described below: 1.
User ’s Manual 4-13 Operating Basics 1:1 Mode Login screen 1. T urn on the computer . 2. The Select Tiles screen will be displaye d. 3. Select St art face recognition () . 4. The Select Account screen will be displayed. 5. Select the account, and click the arrow button.
User ’s Manual 4-14 Operating Basics Loading discs ■ Tr a y O D D T o load disc, follow the steps as detailed below: 1. When the computer ’s power is on, press the eject button to open the disc tray slightly . 2. Grasp the disc tray gently and pull until it is fully op ened.
User ’s Manual 4-15 Operating Basics 3. Lay the disc, label side up, in the disc tray . Figure 4-5 Inserting a disc 4. Press gently at the center of the disc until you feel it click into place. T he disc should li e below the top of the spindle, flu sh with the spindl e base.
User ’s Manual 4-16 Operating Basics ■ Slot ODD T o load disc, follow the steps as listed below and refer to follo wing figures. 1. When the computer's power is on, in sert a disc into the ODD directly . Removing discs ■ Tr a y O D D T o remove the disc, follow the steps as detailed below: 1.
User ’s Manual 4-17 Operating Basics Figure 4-6 Removing a disc 3. Push the center of the disc tray to close it. Press gently until it locks into place.
User ’s Manual 4-18 Operating Basics W riting Disc on Op tical Disc d rive Y ou can use the BD-W riter drives to wr it e d at a to either CD-R, CD-R W , DVD-R, DVD-R DL, DVD-RW , DVD+R, DVD+R DL, DVD +RW , DVD-RAM, DVD-R DL or BD-R/BD-RE discs.
User ’s Manual 4-19 Operating Basics DVD SuperMulti drive BD-Combo drive CD-R: T AIYO YUDEN CO., Ltd. DVD-RAM: (DVD Specifications for DVD-RAM Disc for V ersion 2.0, V ers ion 2.1 or V er sion 2.2) Panasonic CO., L TD. (for 3x and 5x speed media) Hitachi Maxell, Ltd.
User ’s Manual 4-20 Operating Basics BD-Writer drive DVD-RW : DVD S p ecification s for Recordable Di sc for V ersion 1.1 or version 1.2 Victor Comp any of Japan, Lt d. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., L TD. (for 2x, 4x and 6x speed media) DVD-RAM: (DVD Specifications fo r DVD-RAM Disc fo r V ersion 2.
User ’s Manual 4-21 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr iting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them.
User ’s Manual 4-22 Operating Basics ■ When multiple drives that can write data to discs are connected, be sure that you do not write to or delete data from the wrong drive. ■ Be sure to connect the AC adaptor to the comp uter before you write or rewrite any in f orm ation.
User ’s Manual 4-23 Operating Basics ■ Use the audio/video control button to reproduce music or voice. ■ Open the optica l disc dri v e . ■ Do not use shut down, log off, Sleep Mode or Hibernation Mode functions while writing or rewriting.
User ’s Manual 4-24 Operating Basics ■ Y ou cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD- R DL or DVD-RW media using the " Disc Backup" function of TOSHIBA Disc Creator .
User ’s Manual 4-25 Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information.
User ’s Manual 4-26 Operating Basics How to learn more about Corel Digital S tudio Please refer to the Help and Ma nual files for additional Corel Digital S t ud io information. T o open the Corel Digital S t udio Manual, press the F1 key wh en the Corel Digital S tudio is laun ched.
User ’s Manual 4-27 Operating Basics 2. Before recording the video to DVD or Blu-ray disc ■ When you record DVD disc or Blu- ray disc, please use only discs recommended b y the Drive manufa cturer . ■ Do not set the workin g dri v e to a slow de vi ce lik e a U SB1 .
User ’s Manual 4-28 Operating Basics ■ Unfinalized DVDs created on ho me DVD recorders may not be playable on the computer . ■ Use DVD-V ideo discs with a region co de which is either "the same as the factory default setting" (if appli cable ) or "ALL".
User ’s Manual 4-29 Operating Basics Display Devices & Audio ■ "TOSHIBA VIDEO PLA YER" will on ly run when "Colors" is set to "T rue Color (32 bit)".
User ’s Manual 4-30 Operating Basics ■ The "TOSHIBA VIDEO PLA YER" is inte nded for playing DVD-Video, DVD-VR and video files and for vie wing 2D home video content in 3D. The 3D playback of any video content not created by the user may require the permission of third parties, where such content is pro tected by copyright.
User ’s Manual 4-31 Operating Basics 1. Insert an DVD-Video in the optical disc drive while Windows ® 7 is running. When a DVD-Video disc is set in the BD drive (for models with BD- Writer or BD-Combo drive), T OSHIB A VIDEO PLA YER starts automati cally .
User ’s Manual 4-32 Operating Basics ■ Because Blu-ray Disc playback operates according to programs built into the content, operati on methods, operation scre ens, so und effects, icons and other features may vary from disc to disc.
User ’s Manual 4-33 Operating Basics Operating W inDVD BD Notes on Using WinDVD BD. 1. Screen display and avail able features may vary a mongst BD-Videos and scenes. 2. If the menu is opened in the Di splay Area usi ng th e Control window's T op Menu or Menu buttons, touch pad and mouse menu opera tions may not be able to be used.
User ’s Manual 4-34 Operating Basics ■ Depending on the l ighting condition of your room, you may ex perience some flickerings when you have the 3D glasses on. ■ Viewing 3D playback may cause discomfort. In this case, please stop viewing and consult a doctor .
User ’s Manual 4-35 Operating Basics ■ When you use your comp uter in areas whe re the radio waves are weak, which results in poor radio receiving conditions, contact the dealer you purchased it from, or use a commercially availab le antenna booster .
User ’s Manual 4-36 Operating Basics Sound System This section describes some of the audio control functions. Adjusting System V olume Y ou can co ntrol the overall level of sound using Windows V olume Mixer . T o launch V olume Mixer , follow the steps below .
User ’s Manual 4-37 Operating Basics ■ Microphone is the default input device . It should be selected when using the computer ’s internal microphone or an external microphone connected to the Microphone and Line in jack to re cord sound.
User ’s Manual 4-38 Operating Basics Dolby Advanced Audio Dolby Advanced Audio provides a stun nin g liste ning experience from any pair of speakers or headphones. Adding a new level of realism to movies, music, and games, this is the quality audio customers have been missing from your computers .
User ’s Manual 4-39 Operating Basics ■ Do not use the Wireless LAN (Wi-Fi) or Blueto oth functionalities near a microwave oven or in areas subject to radio interference or ma gnetic fields. Interference from a microwave oven or other source can disrup t Wi-Fi or Bluetooth operati on.
User ’s Manual 4-40 Operating Basics Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectru m / Orthogonal Fre quency Division Multiplexing radio technology that complies with the IEEE802.1 1 Wireless LAN standard.
User ’s Manual 4-41 Operating Basics Bluetooth wireless te chn ology Bluetooth wireless technology el imi nates the nee d for cables, such as desktop computers, between your PC and other electronic devices, example of printers and mobile phones.
User ’s Manual 4-42 Operating Basics Release Notes related to th e Bluetooth S tack for Wi ndows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetoo th St ack.
User ’s Manual 4-43 Operating Basics LAN cable types If you are using Gigabit Etherne t LAN (1000 megabits per second, 1000BASE-T), be sure to connect wi th a CA T5e cable or higher . Y ou cannot use a CA T3 or CA T5 cable. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure to connect with a CA T5 cable or higher .
User ’s Manual 4-44 Operating Basics Figure 4-9 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hu b co nnector or router . Check with your LAN administrator and hardware or software vendor before using or configuring a netw ork connection.
User ’s Manual 4-45 Operating Basics Moving the comp uter While the computer is designed for fl exible day-to -day usage you sh ould exercise a few simple p recautions when moving i t in order to help ensure trouble-free opera tion.
User ’s Manual 4-46 Operating Basics When vibration is detected, a message will be displayed on the screen, and the icon in the T askbar notification area wi ll change to the p rotection state. This message is displayed un til the OK button is pressed or 30 seconds pass.
User ’s Manual 4-47 Operating Basics 3D V iewer This feature displays a 3D object on the scre en which moves in according to tilting or vibration of the computer . When the TOSHIBA HDD Protection dete cts computer vibration the Hard Disk Drive head is parked and the 3D object disk rotation will stop.
User ’s Manual 4-48 Operating Basics Sleep and Charge Y our computer can supply USB bu s power (DC5V ) to the USB port even when the power of the computer is turned OFF . "Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state.
User ’s Manual 4-49 Operating Basics Sleep and Music Y our can u se your computer ’s speaker fo r the portable audio devi ce, even when the power of the computer i s turned OFF . "Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state.
User ’s Manual 4-50 Operating Basics However , determining which mode is suitable for your USB device is unknown without trying. T ry each mode, using the following procedu re, from Auto Mode to Alternate Mode to find the suitable mode for your USB device to charge.
User ’s Manual 5-1 Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Sof t keys: FN key co mbination s The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to fo rm soft keys. Soft keys are key combinations that enable, disable or configure specific features.
User ’s Manual 5-3 The Keyboard ■ To u c h P a d Pressing FN + F9 enables or d isables the T ouch Pad function. ■ Zoom (Display Re solution) Pressing FN + Space changes the displ ay resolution.
User ’s Manual 5-4 The Keyboard Generating ASCII charact ers Not all ASCII characters can be generated using norma l keyboard operation, but you are a ble to generate the se characters using their specific ASCII codes. Full size keyboard: 1. Hold down AL T key .
User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's p ower resources in clude the AC ad aptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator panel alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he po wer status with the AC adaptor connected - the follow ing indi cator conditions shou ld be .
User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batte ries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain.
User ’s Manual 6-6 Power and Power-Up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Battery charging notice The battery may not begin cha.
User ’s Manual 6-7 Power and Power-Up Modes Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the T askbar ■ Via the Battery S tatus in the Win.
User ’s Manual 6-8 Power and Power-Up Modes Retention Time Extending battery life T o maximize the life of your battery p acks: ■ At least once a mo nth, disconnect the computer from a power source and operate it on battery powe r until the battery pack fully discharges.
User ’s Manual 6-9 Power and Power-Up Modes Replacing the b attery p ack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and wi ll need to be replaced when it reaches the end of its operati ng life.
User ’s Manual 6-10 Power and Power-Up Modes Removing the battery pa ck T o remove a discharged battery , follow the steps as detailed below: 1. Save your work. 2. T urn the computer's power off - ensure that the Power indicator is off. 3. Remove all cables and peri pherals that are connected to the computer .
User ’s Manual 6-1 1 Power and Power-Up Modes Installing the battery pack T o install a battery pack, follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer . 2. Ensure that the battery pack is securely in place and the battery lock is in its locked position.
User ’s Manual 6-12 Power and Power-Up Modes T O SHIBA Passwo rd Utility The TOSHIBA Supervisor Password Utility allows you to maintain an additional level of security and provides two level s of password security: User and Supervisor .
User ’s Manual 6-13 Power and Power-Up Modes 2. Enter the Password. 3. Press Enter . Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut Down Mode : The computer will shut down without saving data - in view of this you must always save your work before you turn the computer of f.
User ’s Manual 6-14 Power and Power-Up Modes System automa tic Sleep/Hibernatio n This feature automaticall y turns off the system in Sleep or Hibernatio n Mode if the computer is not used for a set duration. Refer to Special features , in Chapter 3 for an explanation of how to set the duration.
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set u p T o run the HW Setup program, click St art -> All Programs -> TOSHIBA -> Utilities -> HWSetup .
User ’s Manual 7-2 HW Setu p General This window displays the BIOS/EC version and contains two buttons: Default and About . Setup This field displays the installed BIOS version , date and EC version . Password This option allows you to set or reset the user password for power on.
User ’s Manual 7-3 HW Setu p If they do not match, the follow ing message appears. Y ou must repeat from step 1. Incorrect Password. Owner S tring This blank field is used to display a message when the password field is displayed on startup. If a password is not registered the message will not be shown.
User ’s Manual 7-4 HW Setu p T o change the boot drive, follow the steps below . 1. Hold down F12 and boot the computer . when the TOSHIBA Leading Innovation >>> screen appears, release the F12 key . 2. Use the up and down cursor keys to select the boot device you want and press ENTER .
User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic p acket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network.
User ’s Manual 7-6 HW Setu p Button Setting This tab let you set conditions for the function buttons. Function Button Function Button Sound Notification SA T A This feature allo ws you to set SA T A in terface setting. Enabled Enables the function button (Default).
User ’s Manual 8-1 Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , however, should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 8-2 T roubleshooting ■ Before you attach an external device yo u should first turn the computer off, then when you turn the computer back on again it will recognize the new device.
User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may oc cur in the following areas: Software The problems may be caused by your sof tware or disk.
User ’s Manual 8-4 T roubleshooting System start- up When the computer does not start pr op erly , check the following items: ■ Self T est ■ Power Sources ■ Power-on Password Self test While booting up the computer , self te st is executed aut omatically and the TOSHIBA logo is displayed on the screen.
User ’s Manual 8-5 T roubleshooting Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer will automa tically shuts down to prevent any damage - in this instance all unsaved data in memory will be lost.
User ’s Manual 8-6 T roubleshooting Battery If you suspect a problem with the battery , you should check the status of the DC IN indicator as well as the Battery indicator . Please refer to Chapter 6, Power and Power-Up Modes for more information on these indicators, together with general battery operation.
User ’s Manual 8-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information.
User ’s Manual 8-8 T roubleshooting Internal display p anel Apparent computer's display pane l problems may be related to the computer's setup and configuration - please refer to Chapter 7, HW Setu p , for further information.
User ’s Manual 8-9 T roubleshooting Hard disk drive Problem Pro cedure Computer does not boot from hard disk drive Check to see whether that is a floppy diskette in the floppy diskette dri ve or a CD-ROM/DVD- ROM in the optical disc drive - if so remove it and try to start the computer again.
User ’s Manual 8-10 T roubleshooting DVD Supe r Multi drive For more inform ation, refer to Chapter 4, Operating Basics . Problem Pro cedure Y ou cannot access a CD/DVD in the drive Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place.
User ’s Manual 8-1 1 T roubleshooting BD-Writer/BD-Combo driv e For further information, please refer to Chapter 4, Operating Basics . SD/SDHC/SDXC memory card, mini SD/microSD Card For further information, please refer to Chapter 8, Optional devices .
User ’s Manual 8-12 T roubleshooting Y ou cannot wri te to an SD/SDHC/SDXC memory c ard Remove the SD/SDHC/SDXC memory card from the computer and check to ensure that it is not write protected.
User ’s Manual 8-13 T roubleshooting Memory S t ick For further information, please refer to Chapter 3, Hardware, Utilities and Options . xD picture card For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 8-14 T roubleshooting MultiMediaC ard For further information, please refer to Chapter 3, Hardware, Utilities and Options . Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse.
User ’s Manual 8-15 T roubleshooting The mouse poi nter moves too fast or too slow In this instance, you should initiall y try changing the speed setting within th e Mouse Control utility . 1. T o access this utility , click St art -> Control Panel -> Hardware and Sound -> Mouse icon.
User ’s Manual 8-16 T roubleshooting USB mouse Problem Procedure On-screen pointer does not respond to mouse operation In this inst ance the system might be busy - T ry moving the mouse again after waiting a short while. Remove the mouse from the comp uter and then reconnect it to a free USB port it in order to ensure it is firmly attached.
User ’s Manual 8-17 T roubleshooting Fingerprint Sensor Problem Pro cedure Readin g of the fingerprint was not successful. In this instance you should try the fingerprint reading operation agai n using the correct finger position - plea se refer to Using the Fingerprint Sensor in Chapter 4, Operating Basics for further information.
User ’s Manual 8-18 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. Sleep and Charge function For more informa tion and settings, please refer to the Using the TOSHIBA Sleep Utility section in Chapte r 4, Operating Basics.
User ’s Manual 8-19 T roubleshooting Some external devices may not be able to use the "Sleep and Charge function". In this case, please try one or more of the follow ing method s. ■ Select another mode. ■ T urn OFF the computer while external devices are connected.
User ’s Manual 8-20 T roubleshooting Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information.
User ’s Manual 8-21 T roubleshooting LAN Press the FN + F5 hot key in order to change the display priority and ensure th at it is not set for the internal display onl y .
User ’s Manual 8-22 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less commu nication, please refer to Chapter 4, Operating Basics .
User ’s Manual 8-23 T roubleshooting Recovery Media T OSHIBA sup port If you require any additional help using your compu te r or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance.
User ’s Manual 8-24 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty .
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Environmental Requirements Size 380.5 (w) x 254.0 (d) x 28.0/36.5 (h) millimete rs (not including parts that extend beyond the main body).
User ’s Manual A-2 S pecifications Power Requirements External RGB monitor port pin assignment I/O (I): Input to computer I/O (O): Output from computer AC adaptor 100-240 volts AC 50 or 60 hertz (cy.
User ’s Manual B-1 Appendix B Display Controller and V ideo mode Display controller The display controller in te rprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Appendix C Information for Wireless Devices Wireless LAN Interoperab ility The Wireless LAN is compatible wit h other LAN systems Direct Sequence S pread S pectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology , and is compliant to: ■ The IEEE 802.
User ’s Manual C-2 Information for Wireless Devices CAUTION about Wireless Devices Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual C-3 Information for Wireless Devices Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer ’s instructions as descr ibed in the user do cumentation that comes with the product.
User ’s Manual C-4 Information for Wireless Devices Restrictions for Use of 5470 -5 725MHz Frequencies in Eu rope T o remain in conformance with European spectrum usage laws for Wireless LAN operati on, the above 2. 4GHz and 5GHz chann el limitations apply for outdoor usage.
User ’s Manual C-5 Information for Wireless Devices Canada - Industry Cana da (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) thi.
User ’s Manual C-6 Information for Wireless Devices Using this equipment in J apan In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification syste m s (premises radio station and specified low-powe r radio station).
User ’s Manual C-7 Information for Wireless Devices 3. Indication for Bluetooth The indication shown below appe ars on this equipment. (1) 2.4 : This equipment uses a frequency of 2.4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1 : Th e interference range of this equip ment is less than 10 m.
User ’s Manual C-8 Information for Wireless Devices Radio Approvals for Wireless Devices Approved Countries/Regio ns fo r the Atheros ® AR9285 Wire less Network Ada pter b/g/n (b/g) W ireless LA N This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-9 Information for Wireless Devices Approved Countries/Regio ns fo r the Realtek ® RTL8188CE W ireless LAN 802.1 1n PCI- E NIC b/g/n W ireles s LAN This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-10 Information for Wireless Devices Approved Countries/Regio ns fo r the Atheros AR9002WB-1NG Wireless Netw ork Adapter b/g/n(b/ g) W ireless LAN an d Blue tooth This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-1 1 Information for Wireless Devices Latvia Lebanon Lesotho Liberia Liechtenstein L ithuania Luxembourg Libya Madagascar Malawi Malaysia Ma lta Mauritius Mexico M onaco Montenegro M.
User ’s Manual D-1 Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Wire size: Minimum 0.
User ’s Manual D-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV - F .
User ’s Manual E-1 Appendix E T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health and the system cooling, in forming you of significant system conditions.
User ’s Manual E-2 TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its st andard limited warranty in any way . TOSHIBA's st andard limited warranty terms and limitations app ly .
User ’s Manual F-1 Appendix F Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries.
User ’s Manual F-2 Legal Footnotes ■ use of computer at temperatures out side the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at hi gh altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to you r computer documentation or visit the TOSHIBA website at www .
User ’s Manual F-3 Legal Footnotes Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts.
User ’s Manual F-4 Legal Footnotes Wireless LAN The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced .
User ’s Manual Glossa ry-2 Glossary IMSM: Intel Matrix S torage Manager I/O: input/ output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting.
User ’s Manual Index-1 Index A AC adaptor 3-3 additional 3-35 connecting 1-4 ASCII characters 5-4 B Battery charging 6-5 extending life 6-8 indicator 2-12, 6-2 monitoring capaci ty 6-6 real time clo.
Satellite P750/P755/P750D/P755D Series User ’s Manual Index-2 H Hard disk drive 3 -3 automatic power off 3-8 Hard Disk Drive/Optical Disc Drive indicator 2-12 HDD Protection 4-45 HDMI device 3-29 He.
Satellite P750/P755/P750D/P755D Series User ’s Manual Index-3 DVD Super Multi drive 8-10 External monitor 8-20 Fingerprint Sensor 8-17 Hard disk drive 8 -9 Hardware and system checklist 8-3 Internal.
An important point after buying a device Toshiba P755D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba P755D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba P755D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba P755D you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba P755D will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba P755D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba P755D.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba P755D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba P755D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
