Instruction/ maintenance manual of the product B1520 Behringer
Go to page of 11
www.behringer.com Version 1.3 M arch 2002 Users Manual F1 22 0 F15 20 B1520 B1800X B1 22 0 B1 02 0 B15 0 0X EUROLIVE ® SERIES ENGLISH.
2 EUROLIVE SERIES SAFETY PRECAUTIONS For your own safety, as well as that of your colleagues and your audience, please: - carefully read the following safety precautions and operating instructions pri.
3 EUROLIVE SERIES FOREWORD Dear Customer, Welcome to the team of EUROLIVE users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this P.A. loudspeaker enclosure. It is with great pleasure that I write this letter to you.
4 EUROLIVE SERIES SERIES EUROLIVE ® Professional Loudspeaker System s Powerful, durable P.A. loudspeaker enclosures with excellent cutting power s Extremely high sound pressure levels for first-class.
5 EUROLIVE SERIES ATTENTION! + The EUROLIVE SERIES loudspeakers are capable of producing extreme volumes. Please bear in mind, that high sound pressures do not only temporarily damage your sense of hearing, but can also cause permanent damage. Be careful to select a suitable volume.
6 EUROLIVE SERIES 1. INTRODUCTION With the BEHRINGER EUROLIVE, you have acquired a first-class P.A. loudspeaker system. You now own at least one component of an expandable system that gives you well-balanced, distortion-free reproduction of your audio material.
7 EUROLIVE SERIES 2. OPTIMUM PERFORMANCE The EUROLIVE SERIES was designed for use in a variety of applications. Naturally, the sound of your speaker enclosures largely depends on the acoustic properties of the environment in which it is used. The following points should help you get the most out of your EUROLIVE speaker system.
8 EUROLIVE SERIES 3. 2 BI-AMPING operation 3.2.1 Advantages BI-AMPING gives you a number of important advantages: lower distortion, greater flexibility of signal transmission and improved overall system performance.
9 EUROLIVE SERIES 4. 2 BI-AMP ING operation s Use the switch on the rear panel of the enclosure to select BI-AMP. Again, you have to remove the frame first (see chapter 4.1). s Assign the low-frequency signal to pins 1-/1+ and the high frequency signal to pins 2-/2+ by modifying your connection cable(s).
10 EUROLIVE SERIES 6 . SPECIFICATIONS 6. SPECIFICATIONS BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications ma y be made from time to time to existing products without prior notice.
11 EUROLIVE SERIES 7 . WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, elect.
An important point after buying a device Behringer B1520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer B1520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer B1520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer B1520 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer B1520 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer B1520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer B1520.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer B1520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer B1520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
