Instruction/ maintenance manual of the product MW20F52 Toshiba
Go to page of 72
COMBINA TION FLA T COLOR TELEVISION AND VIDEO CASSETTE RECORDER / DVD VIDEO PLA YER MW20F52 MW24F52 OWNER’S MANUAL 2 13 19 34 39 43 Introduction Connections Basic setup Playback (VCR) Recording (VCR.
2 Introduction Dear Customer , T hank you for purchasing this T oshiba TV . T his manual will help you use the many exciting features of your new T V . Befor e operating the TV , please read this manual completely , and keep it nearby for future reference.
3 Introduction Important Saf ety Instructions 1) Read these instructions. 2) K eep these instructions. 3) Heed all warnings. 4) F ollow all instructions. 5) Do not use this apparatus near w ater . 6) Clean only with a dry cloth. 7) Do not block any ventilation openings.
4 Introduction IMPOR T ANT SAFEGUARDS S 24) Always operate this equipment from a 120V AC, 60 Hz power source only. 25) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surge s and built-up static charge s (see Section 8 10 of the National Electric Code).
5 Introduction LINE 1 IN VIDEO AUDIO L (MONO) R VIDEO AUDIO L R OUT PUT DIGITAL AUDIO VHF/UHF COAXIAL SAFETY PRECAUTION/ Power source CAUTION: THIS DIGIT AL VIDEO PLA YER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANUAL CAREFULL Y AND RET AIN FOR FU- TURE REFERENCE.
Introduction 6 Precautions Notes on handling When shipping the unit, the original shipping carton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids, such as insect spray , near the unit.
Introduction 7 Contents Introduction IMPOR T ANT SAFEGU ARDS ........................... 3 SAFETY PRECA UTIONS ................................ 5 Po w er source ................................................... 5 Precautions ........................
Introduction 8 Structure of disc contents Normally , DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
Introduction 9 DIGITAL VIDEO Pla yab le discs This unit can play the f ollowing discs . •Y ou cannot pla y discs other than those listed above. •Y ou cannot pla y discs of D VD-RAM, D VD-R OM, Photo CD , etc., or non standardiz ed discs even if the y may be labeled as abov e.
Introduction 10 LINE 1 IN VIDEO AUDIO L (MONO) R VIDEO AUDIO L R OUT PUT DIGITAL AUDIO VHF/UHF COAXIAL LINE 1 IN VIDEO AUDIO L (MONO) R VIDEO AUDIO L R OUT PUT DIGIT AL AUDIO VHF/UHF COAXIAL Front pan.
Introduction 11 Remote contr ol The instr uctions in this man ual describe the function on the remote control. See the page in f or details. *DVD MENU b utton Use the D VD MENU button to display the menu included on many D VD video discs. T o operate a menu, f ollow the instr uctions in “D VD menu.
Introduction 12 Operation: • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of approx. 5 meters. Replace the compartment cover .
13 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
14 Connections For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit.
15 Connections Connecting to optional equipment Before connecting the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet bef ore making any connections.
16 Connections Connecting to optional equipment (Continued) : Front speaker : Rear speaker : Sub woofer : Center speaker : Signal flow Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to repro- duce this realistic effect in the home.
17 Connections MPEG2 sound Y ou can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor .
18 Connections Connecting to a USB Storage Device This unit can be used to read JPEG, WMA, MP3 and DivX ® data for any memory card reader/writer or digital camera that accepts USB Mass Storage Class. For devices that are compatible with the unit’s USB port, please refer to page 9 .
19 Basic setup Press POWER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER. Starting setup The STARTING SETUP function makes installing your unit easily.
20 Basic setup Clock setting The auto clock function will automatically set the built-in clock (Month, Day , Y ear and Time) when the unit is connected to an antenna or cable system and it is turned off.
21 Basic setup Press MENU, then press or to select option. 1 Press or to select “ST AND ARD TIME” , then press . 2 Press / / / to select your time zone, then press ENTER.
22 Basic setup Manual c lock setting Y ou must set the date and time manually for timer recordings, ON/OFF timer and daylight saving time if the auto clock process did not set them correctly . Notes: • After a power failure or disconnection of the power, the timer settings will be lost.
23 Basic setup Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER. 3 Press MENU, then press or to select option.
24 TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
25 Basic setup ■ SLEEP To set the unit to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of SLEEP (120, 1 10, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.
26 Closed captions Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other lan- guages are transmitted on captions channel 2.
27 Basic setup Select the desired channel to be added or deleted using Direct channel selection buttons (0–9) or / . Press MENU in the TV mode, then press or to select option. Press or to select “TV/CABLE”. 1 2 Press MENU repeatedly until the menu screen is cleared.
28 TV operation Press MENU, then press or to select option. To register password Notes: • If you forget the password, you cannot set the V -Chip. •T o avoid forgetting the password, write it down and keep in the safe place. Press or to select “PASSWORD”.
29 TV operation In the V -CHIP menu, press or to select “V -CHIP SET”, then press . Press or to select “MOVIE RATING”. 1 3 Press or to select desired rating.
30 TV operation To set the on timer This feature allows you to have the unit automatically turn on at a predetermined time. If you program the ON TIMER once, the unit will turn on the programmed day (daily/weekly) at the same time to the same channel.
31 TV operation To set the off timer To set the of f timer This feature allows you to have the unit turn off automatically at a predetermined time. If you program the OFF TIMER once, the unit will automatically turn off at the same time everyday . 1 EXAMPLE: T urning off the TV at 1 1:30 PM.
32 TV operation 4 Press or to select the desired picture mode , then press ENTER. 3 After y our desired setting press MENU repeatedl y until the menu screen is cleared. Press or to select “PICTURE”, then press . 1 2 Press MENU , then press or to select option.
33 TV operation Press MENU and then press or to select option. Sound control adjustment/ Stereo and Second A udio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The unit is equipped with a feature known as multi-channel TV sound or MTS.
34 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This unit will automatically rewind the tape when the tape has ended.
35 Playback (VCR) Cassette tape playback To play a prerecorded tape. Load a prerecorded tape: (When loading a cassette tape without the erase prevention tab, playback will start automatically). 1 Press PLAY on the front panel or on the remote. Playback will start.
36 Playback (VCR) Special playbac k Picture search Reverse picture search function Press REV once or twice during the playbac k. Forward picture search function Press FF once or twice during the playback. To return to playback, press PLAY . Press PAUSE/STILL during playback.
37 Playback (VCR) To star t the pla yback, press PLA Y . The playback will be repeated endlessly . Press MENU repeatedly until the menu screen is cleared. If you press DISPLA Y , “ ” will appear on the screen 23 . Con venient function To cancel repeat mode : In step 3 above, press or to select “OFF” position.
38 Playback (VCR) Press ZERO RETURN. The tape will rewind and automatically stop at the “00:00:00” position. 5 Zero return function Press DISPLA Y . 1 Before playback or recording, press COUNTER RESET to set the counter to “00:00:00”. 2 Begin playback or recording.
39 Recording (VCR) Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Note: The pause function will be released after 5 minutes to prevent damage to the tape or the unit.
40 Recording (VCR) One-touch timer recording (OTR) Press once twice 3 times 4 times 5 times NORMAL REC 0:30 1:00 1:30 2:00 3:00 4:00 5:00 6:00 NORMAL REC Recording time Press 6 times 7 times 8 times 9 times 10 times Recording time Load a cassette tape with the erase prevention tab intact.
41 Recording (VCR) T imer recording T imer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. Timer recor ding Notes: • Press to move cursor backward for correction.
42 Recording (VCR) To set daily/weekly timer The current day (Friday) SUN-SAT (Sunday to Saturday) MON-SAT (Monday to Saturday) MON-FRI (Monday to Friday) WKL-WED WKL-THU (Weekly Thursday) (Weekly Wednesday) One month later minus one day Weekly (e.g. WKL-TUE: each Tuesday) or daily (e.
43 Other functions (VCR) To AUDIO (R) IN To AUDIO (L) OUT Audio/Video cable (not supplied) Playback VCR To VIDEO OUT To AUDIO (R) OUT Recording VCR Duplicating a video tape If you connect the unit to another VCR or Camcorder , you can duplicate a previously recorded tape.
44 Other functions (VCR) Duplicating a DVD or CD disc Press SPEED to select the desired tape speed SP or SLP . Preparation: • Press TV/VCR to select the TV/VCR mode. • Load a cassette tape with the erase prevention tab intact. • Load a DVD/CD disc.
45 Basic playbac k (D VD) Press OPEN/CLOSE or PLA Y . The disc tray closes automatically . On the TV -screen, “ ” changes to “Reading” and then playback commences. Press STOP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc.
46 Basic pla yback (DVD) T o pause playback (still mode) Press P A USE/STILL dur ing playbac k. T o resume nor mal pla yback, press PLA Y . • The sound is muted during still mode. T o stop playback Press STOP . T o remove the disc Press OPEN/CLOSE .
47 Basic playbac k (D VD) Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during playback. REV : Fast reverse playback FF : Fast forward playback Each time you press REV or FF , the playback speed changes. To resume normal playback Press PLA Y .
48 Adv anced playback (D VD) Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off). Press JUMP during playback or stop mode.
49 Adv anced pla yback (DVD) [Video CD] Press D D D D D to select “Repeat”. Press ENTER to select “Track” or “All”. The unit automatically starts repeat pla yback after finishing the current track. • If y ou set the repeat mode during stop mode, press PLA Y to star t Repeat playback.
50 Adv anced playback (D VD) Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And the unit can also select tracks or files at random and playback them. These feature works for Video CD. For Audio CD and MP3/WMA CD, please see “Random playback (CD/USB)” 58 and “Program playback (CD/USB)” .
51 Adv anced playback (D VD) Changing angles ANGLE ENTER ▲ / ▼ / / TO P MENU PLA Y DVD MENU T itle selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
52 Adv anced playback (D VD) 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press AUDIO SELECT repeatedly until the desired language is selected. • The on screen display will disappear after a few seconds. Changing soundtrack language/ Subtitles You can select the language when you play a multilin- gual disc.
53 Adv anced playback (D VD) Disc status/T o turn of f the PBC W ith each press of DISPLA Y , the status of the disc will appear on the screen and change as follows. To cancel the display , press DISPLA Y again. DVD Disc status VCD To turn off the PBC Press / to select “Mode”, then press ENTER to select “Off”.
54 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation This player can play back the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R/RW or USB Mass Storage.
55 Adv anced pla yback (DVD) ENTER ▲ / ▼ / / STOP PLA Y D VD/USB A file browser screen will be appear on the screen. • In case the current directory includes 9 files or more, press or to scroll in the file list. • To see contents in folder, select the folder and then press ENTER .
56 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation (Continued) The slide show enables you to view pictures (files) one after another automatically . Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” 63 .
57 Adv anced playback (D VD) Press C / D to select desired DivX ® file. 1 Press ENTER or PLAY. The selected DivX ® movie will be played back on the screen. Press STOP to end playback. The file browser appears on the screen. If you want to watch the other file, repeat steps 1 ~ 2.
58 Adv anced playback (D VD) Repeat playback (CD/USB) Random playback (CD/USB) In the file browser, press B / A or C / D to select “Repeat” during stop mode. Press ENTER to select “Track” or “All”. Press PLAY. The unit automatically starts repeat playback after finishing the current track.
59 Adv anced playback (D VD) Program playback (CD/USB) MP3-1 MP3-2 MP3-3 WMA-3 JPEG Preview Edit Mode Browser View Clear Program Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Repeat :Off Mode :Off Edit Mode Fol.
60 Function setup (D VD) Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 Change the selection using C or D , by referring to the corresponding pages 62~64.
61 Function setup (D VD) Section Option Menu Subtitle Audio TV Screen Display Picture Mode JPEG Interval DRC Parental Password DivX(R) VOD Details To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are available on the disc.
62 Function setup (D VD) Customizing the function settings (Continued) Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen.
63 Function setup (D VD) Picture Mode There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond).
64 Function setup (D VD) Note: If each setup (pages 62~64) has been completed, the unit can always be worked under the same conditions (espe- cially with DVD discs). Each setup will be retained in the memory even if you turn the power off. If you forget the password.
65 Function setup (D VD) Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading ” screen will change, depending on which disc is played.
66 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 .
67 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
68 Others Tr oubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS CAUSE POSSIBLE SOLUTIONS P AGE T ry another channel. Check picture control adjustments. Check for source of reception distur- bance.
69 Others The video cassette's erase prevention tab is broken off. The time is not set correctly . The recording start/end time is not set correctly . The TIMER REC button i s not pressed (the TIMER REC indicator is not lit). T ape is old or worn.
70 Others MW20F52 MW24F52 General Power supply Power consumption Operation: Stand by: Picture tube Speaker Audio output power W eight Dimensions Width: Height: Depth: T uner Antenna input Color system Video head Audio track Hi-Fi frequency response Hi-Fi dynamic range F .
71 Others for CRT -based TV/DVD Combinations, TV/VCR Combinations, and TV/DVD/VCR Combinations, 25" and Smaller ("TV Combination(s)") Limited United States W arranty T oshiba America Consumer Products, L.L.C. ("T ACP") makes the following limited warranties to original consumers in the United States.
72 (4) Labor service charges for set installation, setup , adjustment of customer controls, and installation or repair of antenna systems are not cov ered by this warr anty .
An important point after buying a device Toshiba MW20F52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MW20F52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MW20F52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MW20F52 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MW20F52 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MW20F52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MW20F52.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MW20F52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MW20F52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
