Instruction/ maintenance manual of the product MV19N2/W Toshiba
Go to page of 56
TELEVISION/VCR COMBINA TION Before operating the unit, please read this manual thoroughly . MV13N2/W MV19N2/W OWNER’S MANUAL A TTENTION If you purchase a universal remote control from your local retailer , please contact the remote manufacturer for the required programming code.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
1 IMPORT ANT SAFEGUARDS S3126A PORT ABLE CART W ARNING (symbol provided by RET AC) 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference.
2 IMPORT ANT SAFEGUARDS (CONTINUED) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
3 20. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
4 FEA TURES Color TV With Video Cassette Recorder - Unique space saving design combines a color TV and a video cassette recorder . High Quality Picture T echnology - This TV/VCR equipped “ HQ ” incorporates VHS High Quality technology . A built-in detail enhancer is used to boost the recorded signal and provide picture quality during playback.
5 T ABLE OF CONTENTS PREP ARA TION SAFETY PRECAUTIONS ............................................................................................................. .......................... 6 LOCA TION OF CONTROLS ....................................
6 SAFETY PRECAUTIONS Avoid extreme moisture and dust. The ventilation holes prevent overheating. Do not block or cover these holes. Especially avoid covering the holes with soft materials such as cloth or paper .
7 Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. Avoid places subject to strong vibration. Use in a horizontal (flat) position only . Keep the unit away from flower vases, sinks, etc.
8 LOCA TION OF CONTROLS REAR DESCRIPTION OF CONTROLS FRONT 1 10. VOLUME ▲ / ▼ Buttons - Press to raise or lower the volume of the sound. 11. CHANNEL ▲ / ▼ Buttons - Press to select a channel for viewing or recording. 12. STOP/EJECT Button - Press once to stop the tape in any mode.
9 REMOTE CONTROL DESCRIPTION OF CONTROLS 17 22 16 19 21 23 24 25 27 28 20 1 2 3 4 5 6 8 10 12 14 15 7 1. CLOSED CAPTION Button - Switches between Caption, T ext and TV modes for Closed-Captioned programs. 2. Direct Channel Selection Buttons (0-9) - Allows direct access to any channel.
10 BA TTER Y INST ALLA TION BA TTER Y PRECAUTIONS The precautions below should be followed when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
11 Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires) Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/ UHF antenna to the Antenna Jack.
12 Insert a twin-lead telescopic antenna (not supplied) into the mounting hole on the back of the cabinet until it locks into place. Attach the antenna plug to the antenna jack. Adjust the length and angle of the antenna rods to receive the best possible picture.
13 This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer “ premium pay channels ” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is gener- ally provided by the cable company .
14 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL– CH– CH+ 3 SETTING THE LANGUAGE 1 Press the MENU button.
15 AUT O CLOCK SETTING The Auto Clock function will automatically set the built-in clock (Month, Day , Y ear and Time) when the TV/VCR is connected to an Antenna or Cable system and it is turned off.
16 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ 1 Press the MENU button.
17 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
18 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ buttons (for example, to select channel 2, press “ 0 ” , then “ 2 ” .
19 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ Press the CALL button.
20 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
21 T ext: The T ext Closed Caption Mode will usually fill the screen with a programming schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is changed.
22 T O MEMORIZE CHANNELS CA TV CHART The chart below is typical of many cable system channel allocations. Press the MENU button. Press the SET/TR + or – button to select the CH SETUP mode, then press the ENTER button. Press the ENTER button to select the TV or CA TV mode.
23 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ Press the MENU button.
24 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
25 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
26 SETTING THE V -CHIP (CONTINUED) CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PL.
27 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ Press the MENU button until the MENU screen is cleared.
28 TO CHANGE P ASSWORD V-CHIP SET PASSWORD: – – – – 0 – 9/ENTER/CANCEL/MENU V-CHIP SET V-CHIP : ON TV RATING : TV – PG MOVIE RATING : PG – 13 CHANGE PASSWORD + / – /ENTER/MENU V-CHIP S.
29 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
30 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ EXAMPLE: T urning off the TV at 1 1:30 PM.
31 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
32 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
33 EJECT Push the center of the tape until it is automatically retracted into the TV/VCR. AUTOMA TIC POWER ON AND PLA Y When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately .
34 T APE SPEED T -160 2-2/3 hours 8 hours T -90 1-1/2 hours 4-1/2 hours T -60 1 hour 3 hours T -30 30 minutes 1-1/2 hours T -120 2 hours 6 hours After recording, break off the erase prevention tab if you do not wish to record over the tape. Cover the hole with adhesive tape.
35 TO ST ART PLA YBACK 1 2 PLA YBACK T o play a prerecorded tape. T o turn on the TV/VCR, press the POWER button. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically).
36 TO REWIND OR FOR W ARD THE T APE RAPIDL Y Press the REW (Rewind) button in the Stop mode. “ ” will appear on the screen. Press the FF (Fast Forward) button in the Stop mode. “ ” will appear on the screen. FORW ARD/REVERSE PICTURE SEARCH If you want to see the tape during REW or FF mode, press and hold the REW or FF button.
37 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ SPECIAL PLA YBACK Press the PLA Y button to resume normal viewing speed.
38 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ 1 TO W A TCH A T APE REPEA TEDL Y 4 3 Press the MENU button.
39 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
40 5 CH 012 CH 012 Press the P AUSE/STILL button to avoid recording unwanted material. “ ” and the channel number will appear on the screen and the REC indicator will blink on and off. Press the P AUSE/STILL button or both the REC buttons to continue the recording.
41 1 3 EXAMPLE: One-touch T imer Recording for 30 minutes. 4 TV - VHF/UHF channels CA T V - CABLE TV channels 5 Press the POWER button to turn on the TV/VCR. Load a video cassette with the erase prevention tab intact. OTR 0 : 30 CH 012 Set the TV/CA TV option to the appropriate setting (See page 22).
42 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZER O RETUR N CO UNTER RESET INPUT SELECT SKIP SEARCH REC EJECT VOL+ VOL – CH – CH+ Timer recording can be programmed on-screen with the remote control.
43 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
44 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
45 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
46 CALL MENU – SET/TR + ENTER SP/SLP CANCEL MUTE SLEEP POWER CLOSED CAPTION CHANNEL RETURN DIGITAL TRACKING 0 8 7 9 6 5 4 3 2 1 PROGRAM P AUSE/STILL TIMER REC STOP PLA Y FF REW ZERO RETURN COUNTER R.
47 Press the PLA Y Button on the playback VCR, then press the P AUSE/STILL button. Release the recording pause and the playback simultaneously to begin the duplicating process. NOTES: • It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
48 Press the TIMER REC buttons. Check the following chart before requesting service. PROBLEM AND TROUBLESHOOTING GUIDE T ry another channel. Check picture control adjustments. Check for source of reception disturbance. Check CA TV connection or VHF/ UHF antenna, reposition or rotate antenna.
49 18 20, 21 TV station stopped broadcasting. Sleep timer is set. OFF timer is set. TV station experiencing problems or program tuned is not closed captions. TV signal is weak. The CLOSED CAPTION button is not depressed. T une new channel. Set Sleep T imer to “ 0 ” .
50 Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
51 Picture T ube: T ype 13 (335.4 mm diagonal) T uner T ype: Quartz PLL Frequency Synthesized Receiving Channels: VHF 2-13 UHF 14-69 CA TV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(9.
52 T oshiba America Consumer Products, Inc. ( “ T ACP ” ) and T oshiba Hawaii Inc. ( “ THI ” ) make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
53 All warranties implied by state law , including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
03/07 PRINTED IN THAILAND U 5E20101B P44-BACK 14/08/2003, 15:50 54.
An important point after buying a device Toshiba MV19N2/W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MV19N2/W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MV19N2/W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MV19N2/W you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MV19N2/W will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MV19N2/W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MV19N2/W.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MV19N2/W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MV19N2/W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
