Instruction/ maintenance manual of the product MJ-1101 Toshiba
Go to page of 17
MJ -1101 S er v ice Ma n u a l Ad d en d u m Su p p lemen t t o t h e T r ou b les h oo t in g Sect ion TOSHIBA.
i I n d ex E r r or Cod e P a g e E A 20 1, 2, 3, 4, 13, 14 E A 40 5, 13, 14 E A 60/CC30 6, 7, 8, 9 E A 70 / CC41 6, 7, 8, 9, 13, 14 E A E O 10 CB31 11, 12 *R ecommen d ed Lu b r ica n t M olyk ot e E.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA20 㪄㩷 Note that the height should be different between the cases when the Finisher is installed in e-STUDIO281c/351c/451c and when installed in e- STUDIO352/452 or e-STUDIO2500c/3500c/3510c.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA20 a: Slide the buffer guide to the center and lubricate between the shafts of the front buffer guide. b: Slide the buffer guide forward or backward and lubricate between the shafts of the rear buffer guide.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA20 7. Paper not placed properly in the drawer (Paper may be skewed if there is extra gap between the paper and the side wall in the drawer and thus may cause a jam on the Finisher transport path.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA20 When replacing, be sure not to scratch the shaft (ASYB-SFT-EXT-RLR-DRV- BUF). B. Check if the gear teeth of GEAR-IDLER-EXT-BUF, GEAR1-EXT-RLR-BUF and GEAR2-EXT-RLR-BUF mesh correctly.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA40 Pa p er j ammin g 2. Stationary tray opening/closing switch actuator deformed (A cover-open error occurs if the actuator is deformed because the stationary tray opening/closing switch cannot be turned and performs false detection.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA70 EA60 CC30 CC41 Turn the power OFF. Then check the gap between rollers on the buffer roller guide and the buffer tray while the buffer roller is left lowered.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA70 EA60 CC30 CC41 4. Improper spacing on the edge section of the buffer roller guide and the buffer tray upper section - When more than one sheet of paper is loaded on the buffer tray, the first sheet is pushed out of the tray by the second sheet.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA70 EA60 CC30 CC41 - When more than one sheet of paper is loaded on the buffer tray, the first sheet is pushed out of the tray by the second sheet.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EA70 EA60 CC30 CC41 11. Insufficient ejection of front/rear transport roller If the front and rear transport rollers are not ejected from the transport guide at 0.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks EAE0 1. Loose connection (Loose connection may cause false operation or detection.) (Loose connection may cause false operation or detection.) Paper jamming A.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks CB31 2. False detection caused by the removed actuator spring of the movable tray paper-full sensor (The actuator not ejected) Reinstall SPG-ACTR-01-TRAY if it is removed.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks CB31 An error occurs because the movable tray cannot be lowered (or lifted up) to the specified position after printing operation.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks CC41 EA20 EA40 EA70 - Note that the height should be different between the cases when the Finisher is installed in e-STUDIO281c/351c/451c and when installed in e- STUDIO352/452 or e-STUDIO2500c/3500c/3510c.
Error code Phenomenon Possible cause Items to confirm / Countermeasures Precautions / Remarks CC41 EA20 EA40 EA70 Be sure to draw out the sub-tray when large paper is used.
MJ -1101 Ser vice Manual Ad dendum Version 01.
An important point after buying a device Toshiba MJ-1101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MJ-1101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MJ-1101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MJ-1101 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MJ-1101 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MJ-1101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MJ-1101.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MJ-1101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MJ-1101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center