Instruction/ maintenance manual of the product MD26H82 Toshiba
Go to page of 72
.
2 Introduction Dear Customer , T hank you for purchasing this T oshiba TV . T his manual will help you use the many exciting features of your new T V . Befor e operating the TV , please read this manual completely , and keep it nearby for future reference.
3 Introduction W ide plug IMPOR T ANT SAFEGU ARDS Installation, Car e, and Service Installation Follow these recommendations and precautions and heed all warnings when installing your T V: 16) Never modify this equipment.
4 Introduction IMPOR T ANT SAFEGU ARDS S 0303 25) Always operate this equipment from a 120 V AC, 60 Hz power source only . 26) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surge s and built-up static charges (see Section 8 10 of the National Electric Code).
5 Introduction.
Introduction 6 Precautions Notes on handling When shipping the unit, the original shipping carton and packing materials come in handy . For fully protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids , such as insect spray , near the unit.
Introduction 7 Contents Basic playback (DVD) Playing a disc ................................................. 44 Adv anced playbac k (D VD) Zooming ......................................................... 47 Locating desired scene ...................
Introduction 8 Structure of disc contents Normally , D VD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and A udio CDs are divided into tracks.
Introduction 9 DIGITAL VIDEO Pla yab le discs This unit can play the f ollowing discs . •Y ou cannot pla y discs other than those listed above . •Y ou cannot pla y discs of D VD-RAM, D VD-ROM, Photo CD , etc., or non standardized discs ev en if they ma y be labeled as abov e.
Introduction 10.
Introduction 11 The instructions in this manual describe the function on the remote control. See the page in f or details. POWER button OPEN/CLOSE button TV/DVD button DISPLAY button button SUBTITLE b.
Introduction 12 Operation: • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of appro x. 5 meters. Replace the compar tment cov er .
13 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
14 Connections For basic cable TV service not requiring a converter/ descrambler box, connect the cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the unit.
15 Connections Connecting to optional equipment Before connecting the unit to other equipment, be sure to turn off the pow er and unplug all of the equipment from the wall outlet bef ore making any connections.
16 Connections Connecting to optional equipment (Continued) Connecting an HDMI™ device to the HDMI input The HDMI [1] input on your unit receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI [2] device.
17 Connections.
18 Connections.
19 Connections Connecting to a USB Storage Device This unit can be used to read JPEG, WMA, MP3 and DivX ® data for any memory card reader/writer or digital camera that accepts USB Mass Storage Class. F or de vices that are compatible with the unit’ s USB por t, please refer to page 9 .
20 Basic setup Press PO WER. The starting setup function begins and the Language setup menu appear s on the screen. Press or to select y our desired language, then press ENTER. Starting setup The STARTING SETUP function makes installing your unit easily.
21 Basic setup Setting the language / Clock setting MENU C / D / B / A RETURN Cloc k setting Y ou must set the date and time manually f or ON/OFF timer . Press MENU in the TV mode, then press or to select SETUP menu. EXAMPLE: Setting the clock to “8:30 AM”, 25th.
22 TV operation status TV operation status DISPLA Y Basic setup TV ANT CABLE 12:00 AM SUN 7 ON TIMER 8:30 AM OFF TIMER 11:30 PM SLEEP TIMER 2h00m NATURAL CAPION OFF STEREO 51-3 CITYHD Moon Star Remaining Time 0:20 TV-Y7 English No Program Information is available.
23 TV operation TV operation Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
24 ■ CHANNEL UP/DOWN Press and release CH or . The channel auto- matically stops at the ne xt channel set into memor y . F or proper oper ation, before selecting channels , they should be set into the memory .
25 TV operation Press MENU in the TV mode, then press or to select SETUP menu. Press or to select “TV/CABLE”. 1 2 Press or to select “TV” or “CABLE”.
26 Closed captions WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display closed captioned television programs. Closed captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
27 TV operation Using the closed caption feature Press MENU in the TV mode, then press or to select SETUP menu. 1 Press or to select “CLOSED CAPTION”. 2 Press or to select the desired Closed Caption mode, as follows: •T o view captions, select C1 or C2 (C1 displa ys translation of the primary language in your area.
28 Repeat steps 1-4 for up to 12 channels. Programming your favorite c hannels You can preset up to 12 of your favorite channels using the Favorite Channel Programming feature. Because this feature scans through only your favorite channels, it allows you to skip other channels you do not normally watch.
29 TV operation Labeling channels/Labeling the video input sources Channel labels appear above the channel number display each time you watch the TV, select a channel, or press DISPLAY . You can choose any four characters to identify a channel. The video label feature allows you to label each input source for your TV.
30 TV operation Press MENU in the TV mode, then press or to select LOCKS menu. To register pass wor d Press or to display the password entering mode. 1 2 Enter the same password again using Number buttons (0–9) for safety, then press ENTER. Now the pass word was registered and LOCKS menu will appear on the display .
31 TV operation Press or to select “V-CHIP”. 3 To set the V -Chip OFF : TV RA TING is not set TV -Y : All children TV -Y7 : 7 years old and above TV -G : General audience TV -PG : Parental guidanc.
32 TV operation Y ou can lock the front panel buttons to pre vent y our settings from being changed accidentally (by children, f or example). When the front panel lock is in ON, all control b uttons on the unit’ s front panel (except PO WER) do not operate.
33 TV operation To set the on timer This f eature allows you to ha ve the unit automatically turn on at a predetermined time. If you progr am the ON TIMER once, the unit will turn on the programmed day (once/daily) at the same time to the same channel.
34 TV operation To set the off timer To set the off timer This f eature allows you to hav e the unit turn off automatically at a predetermined time. If you progr am the OFF TIMER once, the unit will automatically turn off at the same time ev er yday .
35 TV operation After your desired setting, press RETURN to c lear the menu screen. Press or to select the item you want to adjust, then press or to adjust the setting. 1 2 Press MENU in the TV mode, then press or to select PICTURE menu. After your desired setting, press RETURN to c lear the menu screen.
36 TV operation CableClear ® reduces visib le interf erence in your TV picture. This is useful when receiving a broadcast with a weak signal (espe- cially a Cable channel) or playing a video cassette or disc damaged by repeated use . Change the picture quality by selecting from three preset color temperatures—cool, medium, and warm.
37 TV operation Selecting the display format/ Selecting the Scan V elocity Modulation (SVM) Display format feature converts a 480p input signal to 540p or 1080i. The SVM feature enhances picture contrast and sharpness. This feature has three modes: HIGH, LOW and OFF.
38 TV operation Resetting your picture adjustments/ Selecting the picture size Press MENU in the TV mode, then press or to select PICTURE menu. 1 Resetting y our picture adjustments 2 Press or to select “RESET”, and then press . The RESET function returns your picture quality adjust- ments to the follo wing factory settings: Mode .
39 TV operation 3 3 3 3 3 TheaterWide 2 picture size (for letter bo x programs) • The picture is stretched the same amount both wider and taller (retains its original propor tion). • The top and bottom edges of the picture ma y be hidden. T o view the hidden areas , see “Picture scroll” on the next column.
40 TV operation.
41 TV operation Stereo and Second A udio Program (SAP)/ Sound control adjustment The unit is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
42 TV operation Selecting the HDMI audio input source/ Selecting the audio languages See page 16 for details on connecting an HDMI or a D VI device to the TV’ s HDMI input. If you connect a D VI de vice, you must also connect the analog audio cab les to the HDMI audio IN jacks to hear audio (see page 16.
43 TV operation Press MENU in the TV mode, then press or to select A UDIO menu. 1 Press RETURN to clear the menu screen. 4 2 Press or to select “DIGIT AL OUTPUT”. Use this feature to select the digital audio output format when you connect a Dolby Digital decoder or other digital audio system to the coaxial digital audio output on the TV.
44 Basic playbac k (D VD) 4 5 1 3 6 Press OPEN/CLOSE or PLA Y . The disc tra y closes automatically . On the TV -screen, “ ” changes to “Reading” and then playbac k commences. Press ST OP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc.
45 Basic playbac k (D VD) To pause playback (still mode) Press PA USE during pla yback. To resume normal playbac k, press PLA Y . • The sound is muted during still mode. To stop playback Press STOP . To remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely .
46 Basic playback (DVD) Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FF during pla yback. REV :F ast rev erse pla yback FF :F ast forw ard playbac k Each time you press REV or FF , the playback speed changes. To resume normal playback Press PLA Y .
47 Advanced playback (DVD) Advanced playback (DVD) Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press ZOOM repeatedl y to return to a 1:1 view ( Off).
48 Adv anced playback (D VD) Marking the scenes Returning to the scenes 1 Press MARKER during playback or stop mode. 2 1 3 Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene.
49 Adv anced playbac k (DVD).
50 Adv anced playback (D VD) Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And the unit can also select tracks or files at random and playback them.
51 Adv anced playbac k (DVD) Changing angles ANGLE ENTER ▲ / ▼ / / T OP MENU PLA Y DVD MENU Title selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
52 Adv anced playback (D VD) 1 2 Press AUDIO SELECT during playback. The current soundtrack language will appear. Press A UDIO SELECT repeatedly until the desired language is selected.
53 Adv anced playbac k (DVD) Disc status/T o turn of f the PBC With each press of DISPLA Y , the status of the disc will appear on the screen and change as f ollows. To cancel the display , press DISPLA Y again. DV D Disc status VCD To turn off the PBC Press / to select “Mode”, then press ENTER to select “Off”.
54 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation This player can playback the MP3/WMA/JPEG/DivX ® -data which has been recorded on CD-R/RW or USB Mass Storage .
55 Adv anced playbac k (DVD) ENTER ▲ / ▼ / / ST OP PLA Y D VD/USB A file browser screen will appear on the screen. • In case the current directory includes 9 files or more, press or to scroll in the file list. • To see contents in folder, select the folder and then press ENTER .
56 Adv anced playback (D VD) MP3/WMA/JPEG/DivX ® and A udio CD operation (Continued) The slide show enab les you to view pictures (files) one after another automatically . Preparation: Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” 63 .
57 Adv anced playbac k (DVD) Press C / D to select desired DivX ® file. 1 Press ENTER or PLAY. The selected DivX ® movie will be played back on the screen. Press STOP to end playback. The file browser appears on the screen. If you want to watch the other file, repeat steps 1 ~ 2.
58 Adv anced playback (D VD) Repeat playback (CD/USB) Random playback (CD/USB) In the file browser, press B / A or C / D to select “Repeat” during stop mode. Press ENTER to select “Track” or “All”. Press PLAY. The unit automatically starts repeat playback after finishing the current track.
59 Adv anced playbac k (DVD) Program playback (CD/USB) Folder-1 Folder-2 MP3-1 MP3-2 MP3 3 Repeat :Off Mode :Off Edit Mode Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA 2 JPEG Previe w Repeat :Off Mod.
60 Function setup (D VD) Setting procedure Press SETUP during stop mode. The following on-screen display appears. 1 2 3 Change the selection using C or D , by referring to the corresponding pages 62~64.
61 Function setup (D VD) Section Option Menu Subtitle A udio TV Screen Display Picture Mode JPEG Interval DRC P arental Password DivX(R) VOD Details To select the language of “Menu”, “Subtitle” and “Audio” if more than one language are av ailable on the disc.
62 Function setup (D VD) Customizing the function settings (Continued) Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen.
63 Function setup (D VD) Picture Mode There are two types of source content in pictures re- corded in DVD video discs: film content (pictures re- corded from films at 24 frames per second) and video content (video signals recorded at 30 frames per sec- ond).
64 Function setup (D VD) Note: If each setup (pages 62~64) has completed, the unit can always work under the same condition (especially with DVD discs). Each setup will be retained in the memory even if you turn the power off. If you forget the password.
65 Function setup (D VD) Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit 44 . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played.
66 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” . Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Af ar 1111.
67 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
68 Others Tr oubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPT OMS CA USE POSSIBLE SOLUTIONS PA G E Tr y another channel. Check picture control adjustments . Check f or source of reception distur- bance.
69 Others The remote control is not aimed at the sensor . Distance is too far or too much light in the room. There is an obstacle in the path of the beam. The batteries are weak. The batteries are not inser ted correctly . Remote control does not operate.
70 Others Specifications 181 channel freq. synthesized VHF: 2-13 UHF: 14-69 CATV: 125 Channels UHF/VHF: 75 Ω coaxial DVD (12 cm, 8 cm), CD (12 cm, 8 cm) DVD: 4 Hz-22 kHz, CD: 4 Hz-20 kHz T emperatur.
71 Limited United States W arranty T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the f ollowing limited w arranties to original consumers in the United States.
How to Obtain W arranty Service If , after following all of the oper ating instr uctions in this manual and re viewing the section entitled “T roubleshooting, ” you find that service is needed: (1) T o find the nearest T A CP Authorized Service Station, visit T ACP’ s website at www.
An important point after buying a device Toshiba MD26H82 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MD26H82 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MD26H82 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MD26H82 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MD26H82 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MD26H82, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MD26H82.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MD26H82. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MD26H82 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
