Instruction/ maintenance manual of the product MD24FP1 Toshiba
Go to page of 52
COMBIN A TION FLA T COLOR TELEVISION AND D VD VIDEO PLA YER MD24FP1 OWNER’S MANUAL 2 13 18 28 31 40 Introduction Connections Basic setup Basic playback Advanced playback Function setup DIGITAL VIDEO 44 Others 20 TV operation ©2004 T oshiba Corporation Before operating the unit, please read this manual thoroughly .
2 Introduction CAUTION: THIS DIGIT AL VIDEO PLA YER EMPLOYS A LASER SYSTEM. T O ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANUAL CAREFULL Y AND RET AIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN AUTHORIZED SERVICE LO- CA TION-SEE SER VICE PROCEDURE.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction (Continued) 13. LIGHTNING T o protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
5 Introduction EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC AR T 250, P ART H) GROUND CLAMP ELECTRIC SERVICE EQUIPMENT 27.
6 Introduction Notes on moisture condensation Moisture condensation damages the unit. Please read the following carefully . Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day . Drops of water form on the outside of the glass.
7 Introduction Structure of disc contents Normally , DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks.
8 Introduction DIGITAL VIDEO Playable discs This unit can play the following discs. • Y ou cannot play discs other than those listed above. • Y ou cannot play discs of DVD-RAM, DVD-ROM, Photo CD, etc., or non standardized discs even if they may be labeled as above.
9 Introduction Contents Introduction IMPORT ANT SAFEGUARDS ............................ 2 Precautions ....................................................... 6 Notes on discs ................................................... 7 Contents .............
10 Introduction Remo te s ensor 12 HEAD PHON E jac k 21 Disc tra y POWE R in dicat or 20 POWE R bu tton 18 28 AUDI O (L /R)/V IDEO IN jack s (L INE I N 2) 15 28 STOP ( ) bu tton 28 OPEN /CLO SE ( ) b .
11 Introduction ENTER SLEEP TV/DVD RECAL L GAME INPUT SELECT POWER CLOSED CAPTIO N PLA Y FWD PLA Y M ODE SKIP STOP SKIP JUM P SLOW P AUSE SL O W RE PEA T A– B MUTE OPEN/ CLOSE ANGLE ZOOM/ CH RTN CAN.
12 Introduction Replace the compartment cover . Install two “R03/AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. Slide the battery compartment cover in the direction of the arrow . 1 2 3 • Aim the remote control at the remote sensor and press control buttons to operate.
13 Connections 75 ohm coaxial cable (not supplied) 300-75 ohm matching transformer (supplied) 300-75 ohm matching transformer (supplied) UHF 300 ohm twin-lead wire (not supplied) VHF 300 ohm twin-lead.
14 Connections For basic cable service not requiring a converter/descrambler box, connect the Cable TV 75 ohm coaxial cable directly to the Antenna jack on the back of the TV/DVD.
15 Connections Press the INPUT SELECT to select the desired mode to use the TV as a monitor. Operate your VCR as usual. To playback from the camcorder, connect the camcorder to the TV/DVD as shown. You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
16 Connections Connecting to optional equipment (Continued) Y ou can enjoy high quality dynamic sounds by connecting the TV/DVD to optional audio equipment.
17 Connections MPEG2 sound Y ou can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor .
18 Starting setup The STARTING SETUP function makes installing your TV/DVD easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! Starting setup Press or to select “TV” or “CABLE”, then press ENTER.
19 Basic setup Notes: • If the unit does not operate properly , or No key operation (by the unit and/or the remote control): Static electricity , etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again.
20 TV operation TV operation Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.
21 TV operation ■ CHANNEL UP/DOWN Press and release CH + or – . The channel automati- cally stops at the next channel set into memory . For proper operation, before selecting channels, they should be set into the memory . See page 23 “T o memorize channels”.
22 TV operation Closed captions Captions: This closed caption mode will display text on the screen in English or another language (depending on the setting of the closed captions CH 1/2). Generally , closed captions in English are transmitted on captions channel 1 and closed captions in other lan- guages are transmitted on captions channel 2.
23 TV operation / / / MENU Press or to select “TV/CABLE”. 1 2 Press MENU in the TV mode, then press or to select option. Press MENU repeatedly until the menu screen is cleared.
24 TV operation T o register password Notes: • If you forget the password, you cannot set the V -Chip. • T o avoid forgetting the password, write it down and keep in the safe place. Press or to select “PASSWORD”. 1 2 Press MENU, then press or to select option.
25 TV operation Press or to select “MOVIE RATING”. 1 3 In the V -CHIP menu, press or to select “V -CHIP SET”, then press . Press or to select desired rating.
26 TV operation 4 Press or to select the desired picture mode, then press ENTER. 3 PICTURE PREFERENCE ST AND ARD SPORTS MO VIE MEMOR Y / / ENTER / MENU CH + CH – After your desired setting press MENU repeatedly until the menu screen is cleared. SETUP/MENU ENTER Press or to select “PICTURE”, then press .
27 TV operation Sound control adjustment/ Ster eo and Second A udio Program (SAP) Sound controls are factory preset but you can adjust them individually as follows: The TV/DVD is equipped with a feature known as multi-channel TV sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
28 Basic playback Read ing Press STOP to end playback. 3 Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLA Y to resume playback (from the scene point). • If you press STOP again or unload the disc (“ 3 ” appears on the screen.
29 Basic playback T o pause playback (still mode) Press P AUSE during playback. T o resume normal playback, press PLA Y . • The sound is muted during still mode. T o stop playback Press STOP . T o remove the disc Press OPEN/CLOSE . Remove the disc after the disc tray opens completely .
30 Basic playback Playing frame by frame Playing in fast reverse or fast forward directions Press REV or FWD during playback. REV : Fast reverse playback FWD : Fast forward playback Each time you press REW or FWD button, the playback speed changes. T o resume normal playback Press PLA Y .
31 Advanced playback Press JUMP during playback or stop mode. Press or to select the “Time”, “Title” or “Chapter”. Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction.
32 Advanced playback A-B Repeat playback Repeat playback DVD VCD CD DVD VCD CD [Audio CD, Video CD] Press D D D D D to select “Repeat”. Press B B B B B / A A A A A or ENTER once or twice to select “Track” or “All”. The unit automatically starts repeat playback after finishing the current track.
33 Advanced playback Program playback/Random playbac k You can arrange the playback order of tracks or files on the disc. And also the unit selects tracks or files at random and playback them. These feature works for Audio CD, Video CD and MP3/WMA/JPEG CD.
34 Advanced playback ANGLE ENTER ▲ / ▼ / / TOP MENU PLA Y DVD MENU Changing angles T itle selection DVD menu Press ANGLE during playback. The current angle will appear. When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from.
35 Advanced playback 1 2 Press AUDIO during playback. The current soundtrack language will appear. Press AUDIO repeatedly until the desired lan- guage is selected. • The on screen display will disappear after a few seconds. Chang ing soundtrack languag e/ Subtitles You can select the language when you play a multilingual disc.
36 Advanced playback 1 AUDIO Karaok e playbac k/Disc status/ T o turn off the PBC 1 R ECALL AUDIO ENTER W ith each press of RECALL, the status of the disc will appear on the screen and change as follows. DVD T o make status display disappear , press RECALL again.
37 Advanced playback MP3/WMA/JPEG CD operation This unit can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding Software (not supplied).
38 Advanced playback ENTER ▲ / ▼ / / STOP PLA Y 0–9 T OP MENU MP3/WMA/JPEG CD operation (continued) MP3/WMA CD playback C D Notes: • During MP3/WMA/JPEG playback, you can not use JUMP , A- B Repeat functions. • Y ou can use Repeat (Track or All), Random functions and Program playback for MP3/WMA/JPEG CD playback (see pages 32 and 33).
39 Advanced playback ▲ / ▼ / / ANGLE DVD MENU You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen.
40 Function setup Section Option Menu Subtitle Audio Tv Screen Display JPEG Interval Select Files DRC Password Parental OSD Language Details T o select the language of “Menu”, “Subtitle” and “Audio” if their languages are recorded onto the disc more than one language.
41 Function setup Setting details Menu, Subtitle, Audio You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. English, Francais, Espanol: The selected language will be heard or seen.
42 Function setup Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1) Press C or D to select “Parental”, then press B or A until the level you require appears. • Level Off: The parental control setting does not function.
43 Function setup Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit 28 . If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played.
44 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” 41 . Abkhazian 1 1 12 Fiji 1620 Lingala 2224 Singhalese 2919 Afar .
45 Others Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
46 Others SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. Poor reception on some channels. Horizontal or diagonal bars on screen.
47 Others Playback does not start when the title is selected. • Check the RATING LEVEL setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle. • Some discs have no subtitles.
48 Others AC 120 V 60 Hz Operation: 135 W , Stand by: 4 W T ype 24 (600 mm diagonal) 1-13/16 x 3-7/8 inches (46 x 99 mm), 8 ohm x 2 5 W + 5 W 75.6 lbs (34.0 kg) Width: 25-13/16 inches (655 mm) Height: 22-1/16 inches (560 mm) Depth: 18-5/8 inches (472.
49 Others T oshiba America Consumer Products, L.L.C. (“T ACP”) makes the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee .
50 All warranties implied by state law , including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
51 Others Memo ................................................................................................................................... ........................................................................................................
04/03 U 5M40101A [E] (P49-Back) 20/4/04, 16:42 52.
An important point after buying a device Toshiba MD24FP1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MD24FP1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MD24FP1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MD24FP1 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MD24FP1 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MD24FP1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MD24FP1.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MD24FP1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MD24FP1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
