Instruction/ maintenance manual of the product MD19N3 Toshiba
Go to page of 47
Owner ’ s Manual Before operating the unit, please read this manual thoroughly. MD13N3R MD19N3 COMBINA TION COLOR TELEVISION AND DVD/CD PLA YER ATTENTION For your protection in the event of theft or loss of this product, please fill in the information listed below which is for your own personal records.
2 CAUTION: THIS DIGIT AL VIDEO PLA YER EMPLOYS A LASER SYSTEM. T O ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS OWNER'S MANUAL CAREFULL Y AND RET AIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONT ACT AN AUTHORIZED SERVICE LO- CA TION-SEE SERVICE PROCEDURE.
3 IMPORT ANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 IMPORT ANT SAFEGUARDS (Continued) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
5 EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC AR T 250, P ART H) GROUND CLAMP ELECTRIC SERVICE EQUIPMENT 25.
6 On handling discs Normally , DVD video discs are divided into titles, and the titles are sub-divided into chapters. Video CDs and Audio CDs are divided into tracks. DVD video disc V ideo CD/Audio CD Each title, chapter or track is assigned a number , which is called “title number”, “chapter number” or “track number” respectively .
7 Contents IMPORTANT SAFEGUARDS .............................................. 3 Notes on discs ...................................................................... 6 Contents .........................................................................
8 Parts and functions Front Rear COAXIAL DIGIT AL AUDIO OUT jack STOP( ) button AC power cord PLA Y ( ) button OPEN/CLOSE ( ) button Disc tray SKIP ( / ) buttons RF IN jack Headphone jack CHANNEL ( / .
9 RECALL Call TV information 15 Call DVD information 25 TV/DVD Switch between TV/A V and DVD 25 POWER Power On/Off 13,14,25 0-9 Direct channel selection of TV 14,18 Input setting 28,29 Enter a passwor.
10 Inserting batteries 1 2 3 Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a dis- tance of Approx. 5 meters.
11 If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.
12 FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV/DVD.
13 4 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL SETUP/ MENU DVD M ENU AUDIO TOP MENU.
14 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
15 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
16 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
17 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 8 7 9 6 5 4 3 2 1 RETUR N JUMP REV SUBTIT LE SETUP/ MENU V OL – V OL + MUTE OPEN/C LOSE T o memorize channels Press MENU in the TV mode.
18 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
19 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N REV PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU S UBTIT LE CH + CH – 0 8 7 9 6 5 4 3 2 1 RETUR N JUMP SETUP/ MENU V OL – V OL + MUTE OPEN/C LOSE Setting the V -Chip Press or until the OPTION menu appears.
20 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
21 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 8 7 9 .
22 Press or to adjust the setting. After your desired setting press MENU until the MENU screen is cleared. CANCEL Pressing CANCEL while making picture adjustments will return all adjustments to the factory preset levels. Press MENU in the TV mode. The TV menu screen will appear .
23 ENTER SLEEP TV/DVD RECALL GAME INPUT SELEC T POWER CLOSED CAPTIO N PLA Y FWD PLA Y MODE SKIP STOP SKIP SLOW P AUSE SLOW REPEAT A–B ANGLE ZOOM/C H RTN CANCEL DVD MENU AUDIO TOP MENU CH + CH – 0 .
24 Disc About this owner ’ s manual This owner ’s manual explains the basic instructions of this TV/DVD. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the TV/DVD may not respond to all operating commands.
25 Preparation/Status display of disc/T o turn off the PBC DVD Status display of disc Press RECALL . The status display of the disc will appear on the screen. Preparation Before DVD/CD operation, please make preparations as follows. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.
26 6 Playback procedure Press OPEN/CLOSE or PLA Y . The disc tray closes auto- matically . On the TV screen, “ ” changes to “ ” and then playback commences. • A menu screen will appear on the TV screen, if the disc has a menu feature. 1 Press OPEN/CLOSE on the unit or the remote con- trol.
27 Special playback Press FWD during normal playback. Each press of FWD will increase the speed of the search [x 2], [x 4], [x 8], [x 15]. (CD: [x 2], [x 4], [x 8], [x 20]) • To resume normal playback, press PLAY . Fast forward playback Press REV during normal playback.
28 NOTES: • Y ou can select the Pause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. Zooming/Locating desired scene This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.
29 NOTES: • Some discs may not work with the repeat operation. • In Repeat A-B mode, subtitles near point A or B may not appear . • Y ou may not be able to set Repeat A-B, depending on the scenes of the DVD. • Repeat A-B does not work with interactive DVDs.
30 Subtitles T urning the Subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during play- back until “Off” appears. Changing the subtitle language Y ou can select the language when playing back a disc recorded with multilingual subtitles.
31 Changing angles/T itle selection/DVD menu When playing back a disc recorded with multi-angle facil- ity, you can change the view angle. 1 Press ANGLE during play- back. The current angle will ap- pear . 2 Press ANGLE repeatedly until the desired angle is selected.
32 Setting language You can change the default settings to customise performance to your preference. 1 Press TV/DVD to select DVD mode. Press SETUP in the stop mode. Press or to select “Language”, then press or ENTER . 2 Press or to select “OSD Language”, then press or ENTER .
33 Setting the aspect ratio of TV screen/Setting on screen display 1 Press TV/DVD to select DVD mode. Press SETUP in the stop mode or No Disc. Press or to select “Picture”, then press or ENTER . 2 Press or to select “TV Screen”, then press or ENTER .
34 Dynamic Range Control 1 Press TV/DVD to select DVD mode. Press SETUP in the stop mode. Press or to select “Sound”. 2 Press or ENTER to se- lect “DRC”. 3 Press or ENTER to se- lect “On” or “Off”. • If you want to return to the previous menu, press or RETURN .
35 Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. NOTES: • If each setup (pages 32~36) has been completed, the unit can always be worked under the same conditions (especially with DVD discs).
36 T o change the parental level 1 Press TV/DVD to select DVD mode. Press SETUP in the stop mode or No Disc. Press or to select “Parental”, then press or EN- TER . 2 Press or to select “Password”, then press or ENTER . 3 Press number buttons (0– 9) to enter the password you have stored.
37 T emporary disabling of rating level by DVD disc 1 Load a DVD disc and press PLA Y (see page 26). 2 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which appears after inserting a DVD will change, depending on which disc is played.
38 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
39 U sing the audio/video inputs If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT . Press INPUT SELECT repeatedly to select the desired mode. “LINE” or TV channel will display on the screen for 4 seconds.
40 SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. Poor reception on some channels Horizontal or diagonal bars on screen Poor sound or No sound TV/DVD does not operate.
41 Playback does not start when the title is selected. • Check the RATING LEVEL setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle • Some discs have no subtitles.
42 Language code list Enter the appropriate code number for the initial settings “Menu”, “Audio” and/or “Subtitle” (see page 32). Language name Code Language name Code Language name Code L.
43 Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results.
44 Specifications GENERAL MD13N3R MD19N3 Power supply: AC 120 V 60 Hz Power consumption: Operation: 75 W Operation: 90 W Standby: 5 W Standby: 5 W Weight: 24.
45 T oshiba America Consumer Products, Inc. (“T ACP”) and T oshiba Hawaii Inc. (“THI”) make the following limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee .
46 All warranties implied by state law , including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
Printed in Thailand 03/07 U 5J10201B [E] (P38-BACK) 7/9/03, 5:02 PM 48.
An important point after buying a device Toshiba MD19N3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba MD19N3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba MD19N3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba MD19N3 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba MD19N3 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba MD19N3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba MD19N3.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba MD19N3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba MD19N3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
