Instruction/ maintenance manual of the product IK-6410A Toshiba
Go to page of 16
INSTR UCTION MANU AL CCD COLOR CAMERA IK-6210A/IK-6410A T ABLE OF CONTENTS IMPOR T ANT SAFEGU ARDS ........................................ 2 1. FEA TURES AND DESCRIPTION ................................. 4 2. COMPONENTS ..............................
- 2 - 1. Read Instructions All the saf ety and operating instructions should be read before the product is oper ated. 2. Retain Instructions The saf ety instructions and instr uction manual should be retained f or future reference . 3. W arnings Comply with all warnings on the product and in the instruction manual.
- 3 - • The CA UTION label, shown on the left, is attached on the camera. CA UTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NO T REMO VE CO VER (OR BACK).
- 4 - 1. FEA TURES AND DESCRIPTION 1. 24V A C/12V DC dual-voltage capable e xtends power choice. 2. Camera has the ability to automatically s witch the display to color in da ylight or black and white at night. 3. Camera synchronization mode is selectab le between inter nal and line-lock.
- 5 - 3. P AR T NAMES AND FUNCTIONS 116 (4.57) 50 (1.97) 63 (2.48) Left side View To p V i e w Right Side View Bottom View Front Vie w Rear View Lens: Mount a CS-mount lens. 24V AC /12V DC power terminal Video output terminal: connect to a TV monitor, etc.
- 6 - 4. CAMERA INST ALLA TION Installation Example 1/4"-20UNC 112 (4.41) 15 (0.59) The Installation example is f or reference only . Mounting brack et is not included. Dimensions : mm (inch) W all 9.5 (0.37) 4 (0.16) φ 6 (0.24) 80 (3.15) 01_p2-p32 06.
- 7 - 5. CONNECTIONS AND OPERA TIONS •P ow er plugs of connected equipment must be disconnected bef ore camera installation. •A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required f or standard connection. •F or details of wir ing and operation of equipment to be connected, ref er to their operation manuals .
- 8 - 5-2. Line-Loc k Control • Matching the vertical synchronization with the power frequency is called the Line-Lock. • This function is activ ated when the LL switch is set to ON. LL ON OFF • When two or more camer as are switched b y the video switcher f or viewing b y a monitor TV , the ve r tical sync.
- 9 - 6. LENS Back-Focus Adjusment Back-F ocus is adjusted at the factory to accommodate most standard lenses. Sometimes, slight adjustment to the camer a back-f ocus is necessary . Loosen the F ocus Lock Screw . Achiev e a clear image by rotating the focus ring.
- 10 - 7. LINE-LOCK PHASE If two or more camer as within a system hav e different A C line phases are switched b y the video s witcher , the picture on the monitor TV will fluctuate ve r tically . Connect 24V A C input lines of all cameras so that they all share the same phase .
- 11 - 8. A UTOMA TIC ELECTR ONIC SHUTTER (AES) Exposure time is controlled automatically within a range of 1/60 sec. to 1/100000 sec. to obtain an adequate signal when the IRIS switch is mo ved to AES. When the back panel s witch is tur ned to VIDEO or DC, the e xposure time is fix ed 1/60 sec.
- 12 - 10. NO TES ON USE AND INST ALLA TION • Do not aim the camera at the sun Ne ver aim the camer a at the sun ev en with the camera power off . • Do not shoot intense light Intense light such as a spotlight ma y cause a bloom or smear . A vertical str ipe may appear on the screen.
- 13 - 12. SPECIFICA TIONS IK-6210A Po wer 24V A C ~ ±10% 60Hz / 12V DC ±10% Po wer consumption 3.5W with Al lens Image sensor 1/3 inch CCD image sensor Image pickup area 0.
- 14 - IK-6410A Po wer 24V A C ~ ±10% 60Hz / 12V DC ±10% Po wer consumption 3.5W with Al lens Image sensor 1/3 inch CCD image sensor Image pickup area 0.
- 15 - 13. EXTERIOR VIEW 1/4"-20UNC 1/4"-20UNC 63 (2.48) 3.5 Dimensions : mm (inch) 116 (4.57) 50 (1.97) 01_p2-p32 06.8.7, 11:08 AM 15.
LIMITED W ARRANTY CCD SECURITY CAMERA IK-6210A/IK-6410A The Imaging System Division ("ISD") of T oshiba America Information Systems, Inc. makes the following limited w arranties with regard to this CCD Camera Model IK-6210A/IK-6410A ("Product").
An important point after buying a device Toshiba IK-6410A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba IK-6410A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba IK-6410A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba IK-6410A you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba IK-6410A will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba IK-6410A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba IK-6410A.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba IK-6410A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba IK-6410A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
