Instruction/ maintenance manual of the product EN-2 Toshiba
Go to page of 48
User’s Manual dynadock™.
EN-2 User ’s Manual dynadock™ Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual EN-3 R e gula tor y Compliance FCC Info r mation Product Name: dynadock™ Model numbe r: P A3541* , P A3542* FCC notice “Dec laration of Confor mity Infor mation” This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules.
EN-4 User ’s Manual dynadock™ EU Dec laration of Confor mity TOSHIBA declares, this product conforms to the following S tandards: This product is carrying the CE-Mark in accordance with the rela ted European Directives. The party resp onsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41 460 Neuss, Germany .
User ’s Manual EN-5 Cop yright Sta tement No part of this publication may be reproduced in any form by any means without the prior written permission. Other tra demarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
EN-6 User ’s Manual dynadock™ The playback of DVD is not supported in the mirror mode. The 3D screensavers (3D FlowerBox and so on) do not work in either mirror or extended mode. This product does not support 3D programs. Unable to enter full screen DOS mode in the mirror mode.
User ’s Manual EN-7 Introduction Intr oduction The T oshiba dynadock with Video utilizes a single USB port to ex tend your computer to your desktop environment with one easy connection, enabling you.
EN-8 User ’s Manual dynadock™ F ea tures ■ Single USB plug connecting to your computer ■ Upright slim design saves desktop space ■ Easily accessible ports located on the front ■ Supports n.
User ’s Manual EN-9 Introduction Bac k panel (Sample Illustration) Conne cti ons on the back of the dynadock Optical S/PDIF digital out port: Use an optical S/PDIF cable (not provided) to connect to your digital audio equipment, e.
EN-10 User ’s Manual dynadock™ Pac ka ge contents ■ dynadock™ (VGA or DVI video interface) ■ Base plate ■ Cable Holder ■ USB 2.0 Cable ■ AC Power Adaptor ■ AC Power Cord/cable ■ CD (User Manual, Driver and Utility) ■ Quick Installation Guide ■ DVI to VGA video adapter (DVI version only) System R equirements ■ 1.
User ’s Manual EN-1 1 Assembly Assembl y Remove the base and dynadock from the packaging. Y ou will need to assemble the two pieces. (Sample Illustration) The dynadock and base befo re assembly Slide the dynado ck onto the base as sh own below .
EN-12 User ’s Manual dynadock™ When assembled, the dynadock is a self-st anding, e asy to plac e unit. (Sample Illustration) The assembled dynadock™.
User ’s Manual EN-13 Installation Installa tion Installing the Driv ers 1. Insert the provided Installation CD into your optical disc drive. It will run automatically and the dialog box will appear . If the auto-run function is disabled on your system, th e program will fail to load automatically .
EN-14 User ’s Manual dynadock™ 2. Click on “Install dynadock Utility & Driver”, the program will begin installing the dynadock Utility and all drivers necessary for the dynadock device. Follow the screen directions to finish the utility installation.
User ’s Manual EN-15 Installation S tep 4: Click Next to start the installation. This may take several minutes. (Sample Image) Ready to Install screen S tep 5: Click Close when the “Inst allation Complete” dialog box shown below appears.
EN-16 User ’s Manual dynadock™ Windows ® Vis ta ® Operations: 3. After the utility installation is completed, the “Video” driver will be installed. S tep 1: When the welcome screen appears, click Next . (Sample Image) Welcome screen S tep 2: Select “I acce pt the terms in the License Agreement” and click Next .
User ’s Manual EN-17 Installation S tep 4: Click Finish when the dialog box shown below appe ars. (Sample Image) Finish screen 4. Once the video drivers are installed, the “Audio” driver will be installed automatically . This step requires th e dynadock to be connected to your computer .
EN-18 User ’s Manual dynadock™ Windows ® XP Operations: 3. After the utility installation is completed, the “Video” driver will be installed automatically . (Sample Image) Video driver Install screen 4. Once the video drivers are installed, a message will prompt you to install the “Audio” driver .
User ’s Manual EN-19 Installation 5. Install drivers. Follow the screen directions to finish the driver installation. S tep 1: When the welcome screen appears, click Next . (Sample Image) Setting selection screen S tep 2: Choose a destination location for the installation or just use the default location.
EN-20 User ’s Manual dynadock™ 6. After finishing the installation, the program will request that you restart the computer . Choose “Y es, I wan t to restart my computer now” and click Finish to finish the setup. All devices will take ef fect after restarting.
User ’s Manual EN-21 Installation Connecting the dynadock™ to the Computer It is recommended to connect the dyn adock to your PC according to the instructions during the audio driver installation. Please follow the ste ps to connect it correctly: 1.
EN-22 User ’s Manual dynadock™ 4. Plug the other end of the USB cabl e into an availabl e USB 2.0 port on your computer . (Sample Illustration) Connecting the USB cable to your computer NOTE: Be s.
User ’s Manual EN-23 Uninstalling Uninstalling T o remove th e dynadock Utility and all the drivers from your computer , please follow the following procedures to remove the Utility , the V ideo driver and the Audio driver one by one. Uninstalling - W indows Vista ® Operations Uninstalling the Utility 1.
EN-24 User ’s Manual dynadock™ Uninstalling the Video Driver 1. T o remove the Video driver completely , open Uninst all a program from the Control Panel , then choose “TOSHIBA V ideo Dock” and click the Uninstall button. (Sample Illustration) Uninstall TOSHIBA V ideo Dock 2.
User ’s Manual EN-25 Uninstalling Uninstall the Audio Driv er 1. T o remove the A ud i o driver completely , open Uninst all a program from the Control Panel , then choose “TOSHIBA USB Audio” and click the Uninstall/Change button. (Sample Illustration) Uninstall TO SHIBA USB Audio 2.
EN-26 User ’s Manual dynadock™ Uninstalling the Video Driver 1. T o remove the Video driver completely , please ope n Add/Remove Programs from the Control Panel , then choose “TOSHIBA Video Dock” and click the Remove button. (Sample Illustration) Remove TOSHIBA Video Dock 2.
User ’s Manual EN-27 Using the dynadock™ Using the dynadoc k™ Y ou may connect devices to the appropriate ports on the dynadock while your computer is running. A slight delay and display flickeri ng is normal before the computer recognizes t he new device.
EN-28 User ’s Manual dynadock™ This will open the Lo cal Area Connection Properties wi ndow for you to configure the network settings a s required according to your network environment. If you are unsure about the settings, consult your netwo rk administrator for assistance.
User ’s Manual EN-29 Using the dynadock™ F ront Panel A udio P or t (Micr ophone) T o conn ect a microphone, plug the 3.5 mm mono microphone jack into the microphone input port.
EN-30 User ’s Manual dynadock™ 2. On the panel, click the 7.1 Virtual SPEAKER SHIFTER button to enable the virtual mul ti-channel function. (Sample Image) 7.1 Virtual SPEAKER SHIFTER button 3. The button next to DSP Mode string allows you to switch between the SHIFTER control and basic control window .
User ’s Manual EN-31 Using the dynadock™ 6. Reset the speakers to default settings (Sample Image) Shifter Controls Using the Basic Controls 1. T o adjust/reset the volume of th e left and ri ght channel of your speakers/headphones 2.
EN-32 User ’s Manual dynadock™ 3. S tops the audio test (Sample Image) Basic controls screen Digital S/PDIF Output (Bac k panel) Using the S/PDIF output fu nction you can directl y output the digital sound source from the computer to your home theater equipment without loss of sound quality .
User ’s Manual EN-33 Using the dynadock™ 3. T urn on the S/PDIF function in the USB 3D 106 Sound Configuratio n utility . On the Main Setting tab of the utility , click the button n ext to the S/PDIF Output string and select Digit al Audio 48KHz from the drop-down menu.
EN-34 User ’s Manual dynadock™ Although the ports and video drivers ar e different, the connection and setup is the same. Connect the monitor cable (not provid ed) to the vide o output port on the dynadock and the external monitor .
User ’s Manual EN-35 Using the dynadock™ Extended Mode Extended Mode lets you split yo ur display across multiple monitors. This provides a number of advantages to increase productivity: ■ View your large spreadsheets across two or three screens with display continuity .
EN-36 User ’s Manual dynadock™ 5. Click OK to close the Display Properties screen. (Sample Image) Display Properties screen Switching from Extended Mode to Mir ror Mode Follow these steps to change t he video output to Mirror Mode,: Windows Vist a ® Operations: 1.
User ’s Manual EN-37 Using the dynadock™ 4. Click OK to close the Display Properties screen. (Sample Image) Display Properties screen Adjusting Video Settings There are three components that make up the screen mode: Resolution: In common usage, this refers to the number of pixels displayed on the screen horizontally and vertically .
EN-38 User ’s Manual dynadock™ The DVI compon ent additionally supports: Note that interlaced modes are not supported. Additional modes may be offered, depending upon the connected monitor, but these are not cu rrently guaranteed.
User ’s Manual EN-39 Using the dynadock™ Adjusting the Vide o Settings - W indows ® XP Operations: 1. Position the mouse anyw here on your comp uter desktop, right-click and select Properties . The Display Properties screen will pop up. 2. On the Display Properties screen, click the Settings tab .
EN-40 User ’s Manual dynadock™ Disconnecting the dynadoc k™ Eject Doc k When the dynadock is connected to your computer, the T OSHIBA dynadock Utility can remove all device s with one-click. Please follow these steps: 1. Right-click the icon in the system tray .
User ’s Manual EN-41 Disconnecting the dynadock™ Eject Dock and Sleep When the dynadock is connected to your computer , the TOSHIBA dynadock Utility can remove all devices and let th e system sleep instantly with one-click. Please follow these steps: 1.
EN-42 User ’s Manual dynadock™ Eject by use of command line Y ou can run dynadock Utility by co mmand line, please follow the steps below: 1. Click Run... on Star t menu. 2. Input “C:Program FilesTOSHIBAdynadock UtilityTOSUSBSvrCtrl.exe” /eject , and run th e program.
User ’s Manual EN-43 Disconnecting the dynadock™ Setting Sleep Ser vice Sleep service allows users to decide wh e ther to use the “Eject and Sleep” item in the system tray menu. ■ Check the “Eject Dock and Sleep PC Service” box: It allows users to execute “Eject an d Sleep” from the system tray menu.
EN-44 User ’s Manual dynadock™ Setting Messa ge Notify Ser vice (Sample Image) Notify message ser vice screen ■ Check “Show undocking complete message” box: If you click “Eject Dock” or “Eject Dock and Sleep”, the eject action will be executed.
User ’s Manual EN-45 Disconnecting the dynadock™ Select Audio De vice When the dynadock is connected to your computer , the TOSHIBA dynadock Utility can change the default audio output device or disable/enable a selected device. Please follow these steps: 1.
EN-46 User ’s Manual dynadock™ Specifica tions This section s ummarizes th e dyn adock’s technical specifications. Physical Dimensions En vironmental Requirements P ow er R equirements Wei ght 507g /17.8 ounces (including the Base) Size 45(w) x 78(d) x 210(h) mm/1.
User ’s Manual EN-47 S pecifications General Specifications *S pecifications are subject to change without furth er notice. PC Interface USB 2.0 Ports and Connectors 6 x USB 2.
EN-48 User ’s Manual dynadock™.
An important point after buying a device Toshiba EN-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba EN-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba EN-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba EN-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba EN-2 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba EN-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba EN-2.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba EN-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba EN-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
