Instruction/ maintenance manual of the product 7FM03281000 Toshiba
Go to page of 34
TOSHIBA Portable Printer B-EP2DL/EP4DL SERIES Owner's Manual [B-EP2DL] [B-EP4DL].
1 N258 CE Compliance (for EU only) This product complies with the requirements of EMC and R&TTE Directives including their amendments. FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
2 <English> <Franaçis> <Deutsch> <Español> <Nederlands> CAUTION! 1. Onl y use TOSHIBA TEC battery packs designed and manufactured for use with the specific printer model. There is a risk of explosion if the battery is replaced by an incorrect ty pe.
3 <Italiano> < Português > <Polski> c䞲ῃ㠊e ਛᢥ㧔❥㜚ሼ㧕 A TTENZIONE! 1. Utilizzare il pacco batterie corretto per ogni modello di stampante. Esiste il rischio di esplosine se utilizzate le batte rie sbagliate. Smaltite le batterie secondo le istruzioni.
4 English Franaçis Deutsch Español The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic e q ui.
5 Nederlands Italiano Português Polski Le seguenti informazioni sono solo gli stati membri della UE: Smaltimento del prodotto (basato sulla direttiva EU-Directiv e 2002/96/EC, Direttiva sullo smaltim.
6 Precautions for Handling of Wireless Communication Devices Bluetooth® Module: TEC-BTM-R (GH30 model) Wireless LAN Module: SD-Link 11g (GH40 model) Trade Mark Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and used byTOSHIBA TEC CORPORATION under license.
7 CAUTION! 1.To avoid injury, be careful not to catch or jam your fingers while opening or closing the cover. 2.Do not touch moving parts. To reduce the risk that fingers, jewellery, clothing, etc., be drawn into the moving parts, turn off the power switch to stop movement.
8 • If water or any other liquid enters the machine, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock. • If the enclosure is damaged when dropped or subject to shock, turn off the power. Continuous use of the machine under such conditions may cause fire or electric shock.
9 Media Specification 㩷 Label 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Tag/Receipt 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 .
10 B-EP2DL Series (Unit: mm) Label Tag/Receipt Receipt Item Media Batch mode Strip mode With black mark No black mark (A) Label/Receipt pitch 10.0 - 999.9 13.0 - 67.0 10.0 – 999.9 --- (B) Label/Receipt length 7.0 - 997.0 10.0 - 60.0 7.0 - 997.0 --- (C) Backing paper width 26.
11 CARE/HANDLING OF THE MEDIA • Do not store the media for longer than the manufactures recommended shelf life. • Store media rolls on the flat end, do not store them on the curved sidesas this might flatten that side causing erratic media advance and poorprint quality.
12 Printer Specification 㩷 B-EP2DL Series 㩷 Model B-EP2DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP2DL-GH40-QM-R Driving power source Lithium ion battery 7.4 䌖 2600mAh 䋨 Nominal value 䋩 䋨 Battery pack model name: B-EP802-BT-QM-R 䋩 Printable count Approx.
13 B-EP4DL Series 㩷 Model B-EP4DL-GH20-QM-R B-EP4DL-GH30-QM-R B-EP4DL-GH40-QM-R Driving power source Lithium ion battery 14.8V, 2600mAh 䋨 Nominal value 䋩 䋨 Batter pack model name: B-EP804-BT-QM-R 䋩 Printable count Approx.100m/Full charge (It depends on the operating environment, print conditions, battery condition, etc.
14 Daily maintenance 㩷 To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned. 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Print head Wipe the print head element with a supplied print head cleaner pen.
15 Media Guide Roller and Strip Shaft Wipe clean the Media Guide Rollers with a soft cloth moistened with absolute ethyl alcohol while rotating the rollers. Wipe clean the strip shaft with a soft cloth slightly moistened with absolute ethyl alcohol.
16 Part Names 㩷 B-EP2DL Series 㩷 㩷㩷 㩷㩷 㩷 㩷 㩷 㩷 Top Cover RS-232C Port (GH20 only) Peel-off Roller Platen IrDA Window Top Cover Open Button Operation Panel Strap Slot USB Port Peel-.
17 B-EP4DL Series 㩷 㩷㩷 㩷 IrDA Window Top Cover Open Button Operation Panel Strap Slot Battery Lever Battery Pack Top Cover Peel-off Roller Platen Print Head Peel-off Roller Cover DCIN Connector USB Port Media Guide Roller Media Sensor RS-232C Port (GH20 only) Belt Clip M-3x8 Screws Print Head Cleaner BD Address Label (2 pcs.
18 Operation Panel Functions 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 No. Name/Icon Function/Usage Liquid Crystal Display (16 lines x 2 lines) Upper line: Icons indicating the printer statuses, such as the radio intensity, battery level, etc.
19 No. Name/Icon Function/Usage (10) CHARGE lamp Lights up in orange while the battery pack is charged and goes out when the battery charge is completed. (11) 䌛 POWER 䌝 button Turns on or off the printer. How to turn on the printer While the printer is off, hold down the POWER button for a few seconds.
20 Loading a battery pack 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 㩷 Pushing aside the Battery Lever with the Battery Pack, insert the Battery Pack into the printer to the bottom. The Battery Pack is locked by the Battery Lever. Be careful of the orientation of the Battery Pack.
21 Removing a battery pack 㩷 Slide the Battery Lever in the direction of the arrow, and remove the Battery Pack from the printer. 㩷 [B-EP2DL Series] [B-EP4DL Series] 㩷 㩷 Charging the Battery P.
22 Loading the Media 㩷 1. 㩷 Press the Top Cover Open Button to open the Top Cover. [B-EP2DL Series] [B-EP4DL Series] 2. 㩷 Move the Paper Guide Lever toward the Operation Panel and the Paper Guides outward. NOTE: Do not move the Paper Guides without unlocking the Paper Guide Lever.
23 Before using a peel-off unit 㩷 When issuing labels in the peel-off mode, pull out the peel-off roller before loading a label roll. 1. Open the Top cover, and push the Peel-off Cover by the Ÿ marks with your thumbs in the direction of the arrow. 2.
24 How to attach the accessories 㩷 㩷 㩷 㩷 㩷 㩷 Belt Clip When you use the printer fixing to your belt, secure the supplied Belt Clip to the printer back. 1. Secure the Belt Clip to the printer back with the two screws. NOTE: Only use the supplied screw to secure the Belt Clip.
25 㩷 Carry case (Option) A carry case exclusively for the printer is available as an option. B-EP2DL Series: B-EP902-CC-QM-R B-EP4DL Series: B-EP904-CC-QM-R Put the printer into the Carry Case using the following procedure. 1. Turn off the printer.
26 Data Transmission IrDA 1. 㩷 Place the printer close to the host so that their IrDA windows face each other within 20 cm distance. 2. 㩷 Turn on the printer and the host, and send data from the host to the printer. NOTE: While communicating, avoid location where the IrDA window is subjected to direct sunlight.
27 㩷 Serial (RS-232C) (GH20 model only) 1. 㩷 Connect the serial interface cable to the RS-232C port on the printer. 2. 㩷 Connect the other end of the serial interface cable to the host. 3. 㩷 Turn on the printer and the host, and send data from the host to the printer.
28 Troubleshooting When a problem occurs during operation, please check the following troubleshooting guide and take corrective action. If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn off the printer, remove the battery pack, then contact a TOSHIBA TEC service representative for assistance.
29 Error Message Cause Solution FLASH MEM FULL The flash memory has insufficient area for storing data. Turn off the [POWER] button, then back to on. Send data from the host to the printer again. If the problem recurs, please turn off the power and contact TOSHIBA TEC service representative.
30 Symptom Point to check (Cause) Solution The printer is communicating via wireless communication. (GH30/GH40 only) Terminate the wireless communication. Communication conditions are incorrect. Set the communication conditions correctly Issue mode is incorrect.
.
.
E PRINTED IN INDONESIA EO1-33079 7FM03281000.
An important point after buying a device Toshiba 7FM03281000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 7FM03281000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 7FM03281000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 7FM03281000 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 7FM03281000 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 7FM03281000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 7FM03281000.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 7FM03281000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 7FM03281000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
