Instruction/ maintenance manual of the product 50L3400U Toshiba
Go to page of 142
Leading innovation >>> integrated Definition LED Television User's Guide: 40L3400U 50L3400U If you need assistance: Toshiba's Support Web site support.toshiba.corn For more information, see "Troubleshooting" on page 120 in this guide.
2 DearCustomer, Thank you for purchasing this Toshiba LED TV. This document will help you use the many exciting features of your new LED TV. Before operating your LED TV, carefully read this document completely.
C ! I PROPER TELEVISION PLACEMENT MATTERS TOSHIBA CARES • F4anufacturers, retailers and the rest of the consurner electronics industry _re cornrnitted to making horne entertainrnent sale and erljoya.
4 Important Safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed allwarnings. 4) Follow all instructions. 5) Do not use this apparatus near water, 6) Clean only with dry cloth, 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 24) When selecting a location for the TV, * NEVER allow any part of the TV to hang over the edge of the supporting furniture, * NEVER place the TV on tall furniture (for example, entertainment cente.
6 which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet. 37) Never hit, press, or place anything on the back cover.
7 Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
8 This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth Ibr an tmcontrolled environment.
9 Trademarkinformation ColorStream, ColorMaster, DynaLight, GameTimer, Native Mode, Stable Sound, Surflock, TheaterWide, and TosLink are trademarks or registered trademarks of ToshibaAmerica Information Systems, Inc. and/or Toshiba Corporation. Blu-ray Disc TM , Blu-ray TM , and the togos are trademarks of the Blu-ray DiscAssociation.
Contents Chapter 1:Introduction ............................................................. 17 Features .................................................................. 18 Overviewof installation, setup, and use ................... 20 TV front and side panelcontrols and connections .
coo,°ots 11 Connecting an HDMI ® or DVI device to the HDMI ® input ................................................ 29 HDMI ®CEC connection ........................................... 31 Connecting a digital audio system ..........................
2 Contents Resetting Factory Defaults ................................. 53 Chapter 6: Setting up yourTV ................................................... 54 Selecting the video input source .............................. 54 Labeling the video input sources .
coo,°ots 13 Adjusting the audio quality ................................ 73 DTSTruSurround TM ........................................... 73 Sound Mode ...................................................... 73 StableSound TM .........................
4 Contents No Signal Power Down ............................................ 93 Using HDMI ® CEC ................................................... 93 HDMI ® CEC playback device (Blu-rayTM/DVD player, etc.) control .............................. Other HDMI ® CEC functions .
coo,°ots 15 Enter text using the software keyboard ............ 115 Performing a Software Upgrade ............................ 116 Viewing the Software Licenses .............................. 116 Using the TV Application Services features ..... 117 Watching movies with Netflix ® .
6 Contents Wireless connection .............................................. 131 Ethernet ................................................................ 131 USB ....................................................................... 131 Dimensions (with stand) .
1 Introduction Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries damage to your equipment or loss of data.
8 introduction Features Foatgros The following are just a few of the many exciting features of your new Toshiba wide screen, integrated HD LED TV: • *** Integrateddigimltuning(8VSB ATSCandQAM)-- Eli.
JJl|rOdUcUorl 19 Features **** DynaLightTM--Backlight control monitors the brighmess of each video frame and automatically adjusts backlight intensity based on the content to create higher dynamic contrast, for deeper blacks and increased depth, see "DynaLight_," on page 102.
0 introduction _el_c_" oj_'_stcdlclfion, sen_, cmduse Overview of installation, setup, and use Follow these steps to set up your TV and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information.
IfltroductJofl 21 TVfivnt and sidepanel controls and connections 11 For details on using the YV's features, see Chapter 6 and Chapter 7. 12 For help, refer to "Troubleshooting" on page 120. 13 For technical specifications, see "Specifications" on page 129.
2 introduction 7Vbackpcmel connec/iorzs "IV back paneJ connections For explanations of cable types and connections, see page 24. --3 2 1 7-- PowerCord (Sample IlhLs'tration) 40/50L3400U- Bac.
Jfl|rOdUCUOfl 23 TVbackpcmel c_nnectio_s The included power cord is for use withthis unit only. Do not use it withother equipment. If you are not goingto use the unit for anextended period of time, disconnect the power cord fromthe wall outlet.
2 Connecti ¥ourTV Overviewof cane types Before purchasing cables, know the connector types your devices require. You can purchase cables from most stores that sell audio/ video devices.
co.°oou.g Yo°, Tv Ovel_c_+" @'able Opes Standard AN cables (rod/white/yellow) @ (Sample IllustratiotO Stat,&_rd A V cables Standard A/V cables (composite video) usually come in sets of three, and connect to video devices with analog audio and composite video output.
6 Connecting ¥ourTV Connec'iT"_ 4 a VL :R, antenna, cable 777,, o1" camcorder Optical audio cable (Sample Illustratio_) @tical audio cable Optical audio cable connect receivers with Do.
co..ecung Your w p7 Co..ecfi_¢ a V( _, ame..a, cable IV,, or eamcolJer Items needed: ¢* Coaxial cables *:* Standard AV cables If you have amono VCR, connect L/MONO on the TV to your VCR's audio out terminal using the white audio cable only.
8 Connecting ¥ourTV Connecn_ a Bht-m3'TM/DVDpla3'er, satellite l_eceiver with ColorStT_eam TMOr VCR Connecting a Blu-ray'M/DVD player, satellite receiver with ColorStream TM or VCR TV .
co..oou.g Yoo, Tv 29 Connecn'_ an /_Mf _a':or D VI &_ice to the /_Mf _a': input NOTE When you use ColorStream TM HD or Video, switch AVinput mode appropriately. To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.
0 Connecting ¥ourTV ( 7onnecfi_q cm t]D3_R'_: oz ,DVI device to the/]DMT_R': input NOTE To connect a computer to the HDM? _input, see "Connection to the TV's HDMI® terminal" on page 34. To connect an HDMP' device, you will need one HDMI ':_ cable (type A connector) per HDMY_ device.
co..oou. Yoo, +v 31 HD3_R;: ( _ (7 connec/Tbn TV back panel DIGITAL COLOR STREAM HD AUDIO[]OUT _vYI_E O /VIDEO IN m 1 HDMI iN 2 VIDEO AUD40 i R [© +,,, ,@ (Sample Ilhlstration) 40/50L3400U DVI cotmec.
2 Connecting YourTV //D3!Lr_R:: ( _ C conneclTon 8ackpanet P{ayback device (fll3NI '_ CEC OVO Player, etc.) P{ayback device (flONI '_ CEC OVOPlayer, etc.
Connecting Your TV _ Com_ec'tit_ga digital audio system Connecting a digital audio system The TV's Digital Audio Out terminal outputs a Dolby _'Digital, 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dotby _ Digital decoder or other external audio system with optical audio input.
4 Connecting YourTV Connecfi_,_ a computer To control the audio: 1 Turn on the TV and the digital audio device. 2 Press the MENU button on the remote control and open the Sound menu. 3 Select Sound > Digital Audio Output > Audio Format and then press the OK button.
co..oou. Yo°, Tv Connecti_ to a home network The edges of the picture may behidden. If receiving a480i (HDMI®), 480p(HDMI% 720p, 1080i, or 1080p signal program, Native Mode TM scales the video to display the entire picture withinthe borders of the screen (i.
6 Connecting YourTV ConneclT"_ to a home netwol'k Connecting the TV to a home ne_orkwithout an Intemet connection Items needed: *_* Standard LAN cables **** Router with a hub Router with a h.
co..oou. Yo°, Tv 37 Connecti_ to a home network Connecting the TV to a home ne_orkwith an Internet connection - wired Items needed: ****Coaxial or telephone cable (depending on your modenl type) @ St.
8 Connecting YourTV Connec.tin_ to a home network Connecting the TV to a home hero,with an Intemet connection - wireless Items needed: @ Coaxial or telephone cable (depending on your modem type) @ Sta.
Using the Remote Control installing batteries To install batteries : 1 Remove the battery cover from the back of the remote control. Squeeze tab , .... and liftcover iL_ I (Sample Illustratio_O Remov#_g the remote back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartment.
0 Using the Remote Control Remote control effect_e range NOTE ¢_, Besure to useAAA size batteries. ¢,, Dispose of batteries in a designated disposal area. ¢ Always consider the environment when disposing of batteries. ¢ Always followapplicable laws andregulations.
Usingthe Remote Control AI Learning about the remote conm)! -T | Learning about the remote control The buttons used for operating the TV are described below. For the HDMP' CEC remote control functions, see "HDMI(R? CEC playback device (Blu-rayTM/DVD player, etc.
2 Using the Remote Control Leal_ing abcmt the remote conn,ol 1 The POWER button turns the TV On/Off. When the TV is off, the power LED indicator on the TV front glows red. 2 The PIC SIZE button cycles through the picture sizes, see "Selecting the picture size" on page 60.
usingthe Remotecontrou Aq Learning about the remote control -T_ 19 The BACK button Returns to the previous screen. 20 The following key functions allow you to control Toshiba HDMP' CEC compatible devices via HDMP' connection. See "Using HDMI(R)CEC" on page 93.
Menu Layout and avi ation Mainmenu layout The tables below and on the next pages provide a quick overview of your TV's menu system. To open the menus (illustrated below), press MENU on the remote control.
IVlenu Layoutand Navigation 45 Main menu layout Icol_ Item Optiol_ Sound Balance Adjusts Balance Bass Adjusts Bass Treble Adjusts Treble DTS TruSurrou nd On / Off Sound Mode Standard/Music/Movie/Clear.
6 Menu Layout and Navigation Navigating the menll _ystem Icon Item Option Get Help Software License Views the software licenses Software Upgrade Performs a software upgrade via the Network System Information Opens the System Information screen Auto Demo Opens Auto Demo menu ROTE Only available if the TV isset to Store mode.
5 Setting up your TV initial Setup When you first turn on or reset the TV, the Initial Setup window wilt appear. 1 In the Menu Language field, press the 4/_ (arrow) buttons to select your preferred language. 2 Press the A/T(arrow) buttons to select Time Zone.
Z_ Setting upyourTV Instal/a_on setup selec_on installation setup selection IVlenu language You can choose from three different menu language settings (English, Francais, and Espafiot) for the on-screen display of menus and messages. To select the menu language: 1 Press the MENU button and open the Installation menu, then highlight Menu Language.
Se_ing up yourTV 49 Stor#_g c'ham_els it_ memol_ (optiot_al) 3 Open the Channel Tuning menu, highlight ANT/CABLE In, and then press the OK button.
0 Se_ing upyourTV Auto Tuning To program channels automatically: 1 Configure the antenna input source, if you have not already done so, see "ANT/CABLE IN" on page 48. 2 Press the MENU button and open the Installation menu. 3 Highlight Channel Tuning, and then press the OK button.
Se_ing up yourTV 51 Mamlal _m#_g Manual Tuning After storing channels in memory, you can manually enter channels if the physical channel is known. 1 Press the MENU button and open the Installation menu. 2 Highlight Channel Tuning and then press the OK button.
2 Se_ing upyourTV S'ett#_g the AV #_put mode To add a channel to the channel memory: -5. Highlight the checked box next to the channel number you wish to add, and then press the OK button to remove the check. NOTE You can also blockspecific channels so that theycannot betuned until you unlock them.
Ssttiug gpyourTV _ Vi_ing the _ystem status To set the Daylight Saving Time status: 1 In the Installation menu, highlight Dayfight Saving Time, and press the OK button. 2 Press the A/T (arrow) buttons to select On or Off, and then press the OK button.
6 Setting up your TV Selecting the videoinput source To select the video input source to view: 1 Press the INPUT button on the remote control or TV control panel. 2 Do one of the following: *_ Press 0-4. Repeatedly press the A / T (arrow) buttons on the remote control, and then press the OK button to change the input setting.
Se.i.g.pVo. TV 55 Selec'dng the video inpzlt soztrc'e NOTE .:_ You can label the video input sources according to the specific devices you have connected to the TV, see "Labeling the video input sources" on page 56. • :,,,. Sources can be"hidden," see"Labeling the video input sources" on page 56.
6 Setting up your TV Labeling the video inpzct sozcrces Labeling the video input sources You can label each video input source according to the type of device you have connected to each source. Choose from the following preset list of labels: *{* -- (default label) *_'* Receiver *_'* Cable *{* DVD *_** Game .
Labeling lhe video input sources Input labeling example: The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device). The screen below (right) is an example of how you can label the inputs if you connected a VCR to ColorStream TM HD, a video recorder to HDMI 1, and a DVD player to HDMI 2.
58 Selling up y0ur TV Tuning lo the next prog_Fammed channel Tuning to the next programmed channel To tune to the next progranmaed channel, press the CH A/V (arrow) buttons on the remote control or TV control panel.
Settingup your TV _(_ 5_'itc'hing bem'eel_ two c'/_am_e/s using SulfLoc'k TM NOTE If you press the CHF1TI,,I button froma non-antenna input,the TV will return to the last-viewed input.
0 Setting up your TV S_Zecth_ the picture size Selecting the picture size You can view many program formats in several picture sizes-- Native, 4:3, Full, TheaterWide l, TheaterWide 2, TheaterWide 3, Normal, and Dot by Dot. NOTE The picture sizeillustrations areexamples only.
Setting up your TV 61 Selec't#_g the picmre size Furl The Full setting is for viewing in the 16:9 (480i, 480p) source programs. If receiving a squeezed 4:3 format program, the picture is stretched horizontally to fill the width of the screen but not stretched vertically.
2 Setting up your TV S_/ecting /he picmre size TheaterWide 3 This setting is for viewing letter box programs with subtitles. (Sample llhcstratiol_) Picture size - TheaterWide 3, letter box with ,s'zcbtitle,s' The picture's top and bottom edges are hidden*.
Setting up your TV _ Select#_g the picmre size 4:3 '; _' • • " ' • '_i _!:ii_i,i_i_i,i_'ii _ !2 51 2 J Normal (Sample I/lustratiol!) Pictm"e size = 4:3 Some program formats will display with sidebars and/or bars at the top and bottom.
4 Setting up your TV 5Z'rol#n_ l/_e TheatcrWide_picture (TheaterWide 2 ai_d3 oi_/y) Scrolling the TheaterWide TM picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.
Setting up your TV _ _'ing lhe Aulo Aspec'@_ature V_ Using the Auto Aspect feature When this feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: ***_A480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input.
6 Se_ing up your TV Adjus_ng the picmre Adjusting the picture Selecting lhe picture mode You can select your desired picture settings from the modes described below. Mode: Desct4ption: Dynamic Maximizes Contrast, Color Saturation, Sharpness, Gray Scale, and Brightness to create more vividand dynamic images.
SeRJrlg up your TV 67 A_tjusting fl_e pidure To select the picture mode using the menu system: 1 Press the MENU button and open the Picture menu. 2 Highlight Picture Mode, and then press the OK button. (&mTple Imay_e) Picture metal - Mode selectio17 3 Pressthe A/T(arrow)buttonstoselectthepicturemodeyou prefer, and then press the OK button.
8 Setting up your TV Using dosd capfions To reset to the factory defaults: 1 Press the Menu button. 2 Select Picture D,- Reset. 3 Press the OK button. A confirmation screen appears. 4 Select the Yes, and then press the OK button. NOTE Any picture setting that you adjust aftects the current input only.
Setting up your TV 69 Us'ing c/osed capdons" NOTE If the program or video you selected is not closed captioned, no captions will display onscreen. To view text, highlight T1, T2, T3, or T4. (Sample I/h_,s'tratiol¢) Cagtiolls - text NOTE If text is not available in your area, a blackrectangle may appear on screen.
0 Setting up your TV Using dosd cupfions 3 Press the A/T (arrow) buttons to highlight the characteristic you wish to change, and then press the 4/1_ (arrow) buttons to select the format for that characteristic. 4 To save the new settings, highlight Done, and then press the OK button.
Adjusting the audio NuUng the sound Pressthe MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. Each time you press the MUTE button, the mute mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 Mute, etc.
2 SetUngup your TV Adjusling the audio Selecting stereo/SAP broadcas_ The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music or other audio information (when provided by individual stations).
Se_ing up your TV 73 A@/sting the on/clio Adjusting the audio quality You can adjust the audio quality by adjusting the bass, treble and balance. To adjust the audio quality: 1 Press the MENU button and open the Sound menu.
4 Setting up your TV Sdecting the P1N code 2 Highlight Stable Sound, and then press the OK button. 3 Press the A / T (arrow) buttons to select On. NOTN Stable Sound TM cannot be used at the same timeas DTS YruSurround TM. The feature is greyed out until DTS TruSurround TM is turned Off.
se.i.g pvo Tv 75 Usingparenm/ conlro/s _)r _SM re, on) Changingor deleUng your PiN code 1 Press the MENU button and open the Options menu. 2 Highlight Parental PIN Setup, and thenpress the OK button. 3 Use the number button to enter a 4-digit number. 4 Select Change PIN or Delete PIN.
76 Setting upyour TV Usin_parenta! con_vls _r _SM 1_gion) 8 To save the new settings, highlight Done, and then press the OK button. NOTE Thisfeature will benot available if no PIN code is set. Downloading an additional rating system In the future, an additional rating system may become available for use to selectively block TV programs and movies.
8 For each desired selection, press the A/T/4/_ (arrow) buttons to highlight the selection, and then press the OK button to select it. A box with an "X" is a rating that will be blocked. 9 To save the new settings, highlight Done, and then press the OK button.
78 Selling upyour TV Usingparent_/ confl'o/s _/" _SM region) Rating system Independent rating system for broadcasters: Rat#Ns : Description and ( bntent themes'." TV-MA TV-14 TV-PG Mature Audience Only (This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.
Setting up your TV 79 Usingparental controls (for _SM region) Indication other than rating system: W-NONE TV None MPAA N/A Movie Not Applicable NOT RATE Movie Not Rated (No rating appears) No rating i.
8O SetUng up your TV _'in_ the input/oc_/&ffure If the correct code is entered, the program lock mode is released and the normal picture appears.
Setting up your TV 81 Locking cham_els 2 Press the A / T (arrow) buttons to select a channel in the lock colunm. 3 Press the OK button. PIN code entry will be required to set a locked channel. NOTE If the PINcode has not yetbeen set, a warning message appears.
2 SetUng up your TV Locldng channels Using lhe panel lock feature You can lock the control panel to prevent your settings from being changed accidentally (by children, for example). When Panel Lock is set to On, none of the controls on the control panel operate except the POWER button.
Setting up your TV _Q MediaS_are (_deo_; Music, and Photos) lVlediaShare (Videos, Music, and Photos) MediaShare provides a simple graphic interface to quicldy access and share videos, nmsic, and image files across your home network and the other connected devices.
4 Selling up your TV Media_S_are (_deos, Music, and Photos) *:* Maximum number of files: 500 per folder _,** Maximum video resolution: 640x480 (Motion JPEG), 1920 x 10% (other) Content on a connected Media Server: _:* File format: MPEG2-PS/TS, MP4 (Low resolution) _,** Video: MPEG2, H.
Setting up your TV _ MediaS_are (lddeo_; Music, and Photos) Auto Start function WhenAuto Start is enabled, you will be asked if you want to start the MediaShare when a USB device is inserted. If Auto Start is disabled, you must manually start the MediaShare from the menu.
6 Setting up your TV MediaSoare (14deos, Music, and I°hotos) 4 The focus will jump to one of the supported devices at the bottom, select one of them, and then press the OK button. (&mTple Image) MediaShare setup ,s'cl'eetz NOTE ¢, The viewer wil l open even if there are no photo or music files.
Setting up your TV 87 MediaS_are (_deo_; Music, and Photos) 2 When you select a folder, press the OK button to move to the next layer, or press the BACK button to return to the previous layer. 3 Press the OK button to view the selected photo in Single View mode.
8 Setting up your TV MediaS_are (_deos, Music, and Photos) Playing musicflJes You can listen to music from a list of available files. When listening to nmsic files, you can select nmsic lists, play, pause, stop, skip, repeat play, and adjust sound settings.
Setting up your TV 89 Media57_are (14:deos; Music, and Photos) NOTE During playback, you can adjust the Sound functions fromthe Quick Menu. To set the repeat mode: 1 Press the MENU button to open the Quick Menu. 2 Press the &/T(arrow) buttons to select Repeat.
0 Setting up your TV MediaShare (Yideos,Music, al_dPhotos) NOTE _ If playback finishes before STOP is pressed, the next file will automatically start to play from the beginning. ,,:,, Depending onthe file size, it may take some timefor playback to begin.
Se_irlg up your TV 91 DivX_R) DivX ® 1"o register your TV to a Div× ®account: This TV allows you to play back files purchased or rented from DivX _) Video-On Delnand (VOD) services. When you purchase or rent DivX <") VOD files on the internet, you will be asked to enter a registration code.
2 Setting up your TV Setdng the sleep dmeF To playback Div× HD content: *_** To play in Past reverse or fast forward directions, press the 44 or _ button during playback.
Setting up your TV QQ No 5'i_al Power Down Press the Number buttons to enter the length of time (maximunl of 12 hours) and then press the OK button. Or press the A/T (arrow) buttons to increase or decrease in 10-minute increments (nlaxinmm of 12 hours).
4 Sel_ing upyour TV Usmg HDM[q _ ('E( HDIVil ®CEC playbackdevice (Blu-rayWDVD player, etc.) control With your TV's remote control, or using the HDMI _' CEC Player Control menu, you can control the connected HDMI _ CEC playback device you are watching.
Setting up your TV • 95 Usmg HDM[q _ ( _( Item." Description: Power Turns the select device On/Off Root Menu Accesses the root menu of the selected device Contents Menu Accesses the contents listwhen you press OK. At thistime, the HDMI CEC Player Control menu disappears.
6 Se_ing upyour TV Usmg HDM[q _ ('E( Other HDIVll ® CEC functions When the Enable HDMI CEC Control and each item in the HDMI CEC Control Setup menu are set to On, the following functions wilt be enabled. J7{Cl11." TV Auto Power Auto Standby Amplifier Control Initial Speaker Setting Descwiption.
Setting up your TV 97 !sing the HDM[_R; settings jedure Using the HDlVll ® settings feature HDiVU ®1(2, or3) RGB Range You can select RGB range of HDMI inputs from the following modes, as described below: Mode A,,,,,,u,_!o( default) Full Limited 1 From the Options menu, highlight Input Options, and then press the OK button.
8 Setting up your TV Displuyirlg _stums il_)l_atiorl Displaying "iV status information To display TV status information using the INFO button: *_** Press the INFO button on the remote control. The following information will be displayed (if applicable): *_** Current input (ANT/CABLE, Video, etc.
Setting up your TV QQ Understanding; the last mode memolTjbamre Understanding the last mode memory feature If the power is cut off while you are viewing the TV_ the Last Mode Memory feature automatically turns on the TV when the power is resupplied.
7 Using Features TV's Advanced Using the advanced picture settings ColorMaster TM The CotorMaster TM feature allows you to adjust standard colors. 1 From the Picture menu, highlight Advanced Picture Settings, and then press the OK button. 2 Highlight ColorMaster, and then press the OK button.
Using the TV's Advanced Features 1 01 Using the advanc'ed pic'tzlre _tHngs 5 Press the A / T (arrow) buttons to adjust the setting. 6 Repeat Steps 3 through 5 to adjust other colors. To reset the adjustn_ents to the factory defaults, select Reset on the screen.
O_ Using the TV'sAdvanced Features (£'ing the advancedpic rare settings DynaLight TM The DynaLight TM feature automatically strengthens the black coloring of dark areas in the video according to the level of darkness. 1 From the Picture menu, highlight Advanced Picture Settings, and then press the OK button.
Using the TV's Advanced Features 103 Using the advanced picmre settings 1 From fl_e Picture menu, highlight Advanced Picture Settings, and then press fl_e OK button. 2 Highlight Noise Reduction and then press the OK button. 3 Press the A / T (arrow) buttons to select MPEG NR and then press the OK button.
104 Using the TV's Advanced Features Uxing yom" horae 1,letwork Using your home network This TV can share videos, music, and photos across your home network and other connected products through the MediaShare feature.
Using the "rV'S Advanced Featurss 1 05 When usin,_ a Wireles:_' nem'ork c'om_ec'tion When using a Wireless network connection Wireless LAN and your Health: Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy.
106 Using ihe TWs Advanced Features Settling up the Network Se ing up the Network You can select the Network Type. 1 Press the MENU button. 2 Select Network > Network Setup > Connection Type and press the OK button. 3 Press A/T (arrow) buttons to select Wired or Wireless.
7 Setting z_p the Network | U Easy Setup using PBC (Push buUon configuration) 1 Press the MENU button. 2 Select Network > Network Setup > Wireless Setup and press the OK button. 3 Press A/T (arrow) buttons to select Easy Setup and press the OK button.
108 Using ihe TV's Advanced Features Setting up the Network To cancel searching for the AP: @ Press the BACK button while searching for the AR A message appears. Press 4/_ (arrow) buttons to select Yes, and then press the OK button. Assisted Setup 1 Press d_e MENU button.
Using the _'s Advanced Features 109 Setdng up the Network 4 Press the A/T (arrow) buttons to select the Network Name, and then press the OK button. The Software Keyboard window appears. 5 Input the Network Name using the Software Keyboard. For more information, see "Using the software keyboard" on page 114.
1 1 0 Using the TV'_; Advanced Features Setting up the Network NOTE Settings arenot saved if the BACK button is pressed before Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press the MENU button.
Using the _'S Advanced Features 1 1 1 Setting up the Network NOTE Even if anAPfor IEEE 802.11n is used when Encryption is setto WEP or TKIP, the Speed value mightbelow.We recommend thatthe Encryption setting is changed to AES (Under manual setup).
1 12 Using the TV's Advanced Features ,S'etting up tke Network Press the 4/D,- (arrow) buttons to select the IPAddress field and use the 0-9 buttons to enter in a digit. Press the _ (arrow) button to select the subsequent fields. To save the setting, press the OK button.
Using the TV's Advanced Features 113 Setting up the Network Manual Setup: 1 Press the MENU button. 2 Select Network > Network Setup > Advanced Network Setup and press the OK button. 3 Press the A/T (arrow) buttons to select DNS Setup and then press the OK button.
14 Using the TV's Advanced Features Using lhe sofa,are keyboard NOTE Favorable Network Connection Test results do not guarantee an Internet Connection. Depending onthe situation, some Internet features may not beavailable. To cancel Network Connection Test, press the EXIT button while searching for the Internet connection.
Using the TWs Advanced Features 1 15 Jsing the software kc_vboard Enter te_ using thesoftware keyboard 1 Highlight the desired character on the on-screen software keyboard. 2 Press the OK button. 3 Repeat Step l and 2 until you have entered all desired text.
16 Using the TV'sAdvanced Features Pel_[bl_ing a 5_f!_,are UpgT_ude Performing a Software Upgrade TOSHIBA may offer upgrades for the TV's software in the future. The TV's software is upgraded via the Network. NOTE An Internetconnection is required.
Using the TV's Advanced Features 117 _/Tewing the Software Licenses Using the TV Application Services features This Smart TV enables you to connect to your favorite content with popular apps like.
1 1 8 Using the TV'S Advanced Features Viewing the Software Licenses Watching movies with Ne_li_ 1 Press the NETFLIX button on the remote control. 2 Follow the on-screen instructions. After having activated Netflix _:' player and prepared an Instant Queue, movies and TV episodes in your Instant Queue will appear on the TV screen.
Using the TV'S Advanced Features 1 1 9 _/Tewing the Software Licenses YonTube TM YouTube is a video-sharing service managed by YouTube, LLC. This TV allows you to view YouTube content. 1 Press the HOME button to launch the applications bar. 2 Press the 4/_ (arrow) buttons to select YouTube and press the OK button.
Troubleshooting 6eneral troubleshooting Before calling a service technician, review this chapter or visit the Toshiba technical support Web site at support.
Troubleshooting 121 Picmreproblems Onscreen Demo Pop-up If your TV is displaying a Demo pop-up screen, reset the Store / Home mode setting to Home. For more information see "Installation setup selection" on page 48. TV will not turn on. Ensure the power cord is plugged in properly, and then press the POWER button.
122 Troubleshooting 5_mdproblems Noisy picture. If you are watching an analog channel (off-air broadcast or Cable TV), you can set the DNR feature to reduce visible interference in the TV picture, see "DNR (Dynamic Noise Reduction)" on page 103.
Troubleshooting 123 Remote conlrol plvblems If you hear no sound, try setting the MTS feature to Stereo mode, see "Selecting stereo/SAP broadcasts" on page 72. If you are not receiving a second audio program from a known SAP source, make sure the MTS feature is set to SAP mode, see "Selecting stereo/SAP broadcasts" on page 72.
124 TroubleshooUng Closed c'c_tion problems Closed caption problems If the program or video you have selected is not closed captioned, no captions appear on the screen.If text is not available, a black rectangle may appear. If this happens, turn off the closed caption feature, see "Using closed captions" on page 68.
Troubleshooting 125 Networkproblems Legacy HDMP sources. Some legacy HDMI _ sources may not work properly with the latest HDMP' TV products due to new standard adoption. Network problems Cannot connect to the Internet. Check the modem and its incoming cable/telephone connections, see "Connecting to a home network" on page 35.
12G Troubleshooting Network problems **** Example of proper setup: The computer has the IP address 192.168.0.100 with the Subnet mask 255.255.255.0, the TV has the IP address 192.168.0.10l with the Subnet mask 255.255.255.0; both are on the same subnet.
Troubleshooting 127 Wireless l_em_ork plvblems Wireless network problems Check that the router/AP (Access point) power is On. After starting wireless network setup, confirm that the network is configured properly by performing the network connection test, see "Network Connection Test" on page 113.
128 TroubJeshooUng Ij?fle prob/em persists after tidyingthe _haions For Connected MediaShare Depending on the media server, it may take time to display the list. ifthe problem persists after trying the solutions Contact Toshiba at: support.toshiba.com.
ix Specifications NOTE '¢o These models complywith the specifications listed below. ¢, Designs andspecifications aresubject to change without notice. ,¢,, These models may not becompatible withfeatures and/or specifications thatmay beadded inthe future.
130 specificatio.s PowGr SOIII_'(-.'G Power source 120VAC, 60 Hz Power maximum current t1.1A 1.4A Power consumption 40L3400U 0.3 W in Standby mode 50L3400(3 0.3 W in Standby mode Audio power 40L3400U 6£)_ 7W 50L3400U 6f_ 7W Speakertype 40L3400U Two 5.
Specifications 131 Digital audio output HDNl®input HDMP' compliant (typeAconnector) HDCP compliant 2-channel Linear=PCM/Dolby _' Digital; 32/44.1/481d-tz HDMP'Audio sanlpling frequency; 16/20/24 bits per sanlple Digital audio output Optical type Wireless connection Standard IEEE 802.
132 specificatio.s Supplied acce_ories Weight(mass) 40L3400U 20.9 lbs (9.5 kg) 50L3400U 35.1 lbs (15.9 kg) Operating conditions 30 _o o 30 _l'e .[_.
Specifications 133 Acceptable sigT_a/jbl_atsjbr HDMI(R; Acceptable signal formats for HDlVll ® HDMl®signal formats Format Resolution _ Frequel_cy 1t.. Frequency Pixel Clock Frequency VGA 640x480 59.940 Hz 31.469kHz 25.175MHz SVGA 800x600 60.317 Hz 37.
License Agreement License Information on the software used in the TOSHIBA Digital "IV The software pre-installed in the TOSHIBA* Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBAor a third party.
uooo,oA ,oo,,,oo, 135 These sot_vare components ate licensed to the user free of charge and theretbre not covered by any warranty within the scope of the applicable laws. These sot_vare components are provided in "as is" condition without any warranty, whether express or implied.
13G uce.se.g eeme.t deletions, or changes to the original files must be cleatly indicated in accompanying documentation. (2) If only executable code is distributed, then the accompanying documentation must state that "this so_vare is based in part on the work of the h_dependent ,1PEG(houp".
uooo.o 137 This license applies to all files found in such packages, and which do not fhll under their own explicit license. The license aftEcts thus the FreeType fbnt engine, the test programs, documentation and make files, at the very least.
[; Index A Acceptable signal formats for HDMI® HDMI® signal formats 129 Additional Safety Precautions Installation, Care, andService Choosing a location for your LED TV To Display your LED TV on the.
,,,,,ox 139 Channel Browser elements 59 tuning channels 57 channels F locking channels82 Cinema Mode Noise Reduction MPEG NR DNR 100 Color Temperature Static Gamma DynaLigW M Dynamic Contrast99 Compon.
140 ,.cox securite 17 Introduction Safety icons Features Overview of installation, setup, and use 17 last mode memory feature 97 License Agreement License Information on the software used in the TOSHI.
123 Resetting Factory Defaults53 $ safety icons 17 Safety Precautions WARNING CHILD SAFETY Important Safety Instructions 2, 4 Scrolling the TheaterWide TM picture (TheaterWide 2 and3 only) Using the A.
142 ,°cox Sound problems120 Tuning to a specific channel (programmed or unprogrammed) Switching between two channels using Channel Return Switching between two channels using SurfLock TM Selecting th.
An important point after buying a device Toshiba 50L3400U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 50L3400U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 50L3400U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 50L3400U you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 50L3400U will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 50L3400U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 50L3400U.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 50L3400U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 50L3400U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
