Instruction/ maintenance manual of the product 37XV625 Toshiba
Go to page of 59
XV*** Digital Series TOSHIBA.
2 Contents SETTING UP Safety precautions – Some do’s and don't for you to be aware of 4 Installation and important information 5 The remote control – an at -a-glance guide 6 Connecting exte.
3 Contents (continued) Software Upgrade – auto upgrade, searching for new software, software licences, system information, reset TV 40 Media player – auto start, opening media player automatically.
4 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety .
5 Installation and important information EX CL USION CLA USE T oshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) fire; ii) earthquake; iii) accidental d.
6 The remote control Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V . Do not combine a used, old battery with a new one or mix battery types.
7 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
8 REGZA -LINK connections HDMI IN HDMI OUT HDMI OUT HDMI OUT The back of your television Playback equipment AV amplifier Playback equipment The basic functions of connected audio/video equipment can be controlled using the televisions remote control if a REGZA -LINK compatible device is connected.
D VI / HDCP OUT VIDEO A UDIO L R R L OUT IN 9 Connecting an HDMI or D VI device to the HDMI input The HDMI input on the television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
10 Connecting a computer via HDMI the back of your television Computer Audio cable for PC to television connection (not supplied) HDMI-to-DVI adaptor cable With the HDMI connection, you can watch your computer ’s display on the television and hear the sound from the televisions speakers.
11 Acceptable signals through HDMI terminals Format Resolution V . Frequency H. Frequency Pixel Clock Frequency VESA Standard 480i 720 X 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz 576i 720 X 576i 50.000Hz 15.625kHz 27.000MHz 480p 720 X 480p 59.
12 Connecting a computer via RGB/PC The back of your television Computer Audio cable for PC to television connection (not supplied) Conversion adaptor if required (not supplied) RGB PC cable (not supplied) Mini D -sub 15 pin connector Before connecting any external equipment, turn off all main power switches.
13 Acceptable PC signals through the PC terminal Format Resolution V . Frequency H. Frequency Pixel Clock Frequency VESA Standard (DMT) VGA 640 X 480 59.940Hz 31.469kHz 25.175MHz • 72.809Hz 37.861kHz 31.500MHz • 75.000Hz 37.500kHz 31.500MHz • SVGA 800 X 600 56.
14 Using the Controls Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. T o alter the volume press — j + . T o alter the programme position press e e F f f .
15 T uning the television for the first time Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected. T o set up the television use the buttons on the remote control as detailed on page 6.
16 Setting Antenna or Cable Ant/Cable In (if available) 1 2 Press MENU and use z or x to select SETUP . Use e to highlight Ant/Cable In . Press z or x to select Antenna or Cable . A screen will appear warning that the televisions features will be changed.
Auto T uning Previous settings will be lost! P ress EXIT for no change. T uning Mode DTV and A TV Start Scan SETUP Menu Language English Country UK Ant/Cable In Antenna Auto T uning A TV Manual T uning DTV Manual T uning DTV Settings A V Connection 1 2 3 Select DTV Manual T uning from the SETUP menu and press OK .
18 DTV location, auto channel update, D VB character set, Analogue switch off This is a digital television which is integrated to allow the use of both digital and analogue services. However , during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.
Channel Options TV CH Name 1 BBC ONE NOTE: When the television is switched off the mode being viewed at the time will automatically be selected when the television is switched back on. 19 Use e or f to move through the list to the preferred position, the other channels will move to make room.
A TV Manual T uning P os. Channel Station 0 C60 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 6 C69 7 C69 8 4 Press x to select System and use f or e to change if required. Then press x to select Search . Press f or e to begin the search. The search symbol will flash.
A TV Manual T uning P os. Channel Station 1 C22 BBC1 4 C32 CH4 2 C28 BBC2 3 C25 ITV 5 C69 6 C69 7 C69 8 C69 A TV Manual T uning P os. Channel Station 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 6 C69 7 C69 8 C69 9 C69 21 AT V manual tuning (continued), skipping channels, sorting channel positions Press OK to store.
V olume Press j —– or j + to adjust the volume. Sound Mute Press k once to turn the sound off and again to cancel. Sound Controls 22 General controls, stereo/bilingual transmissions, time display .
In the SOUND menu use e to highlight Dolby V olume . Press z or x to select Low , High or Off . NOTE: The Dolby V olume setting influences the Dynamic Range Control and Digital Audio Output settings. If Dynamic Range Control is set to On this feature will be unavailable.
24 Sound settings (continued) – dynamic range control ( DTV only), audio level offset, headphone settings, audio description 2 Dynamic R ange Control ( DTV only) In the SOUND menu press e to select Dynamic Range Control . Press z or x to select On or Off .
25 14:9 Use this setting when watching a 14:9 broadcast. SUBTITLE When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed.
PC FORMA T Press QUICK to reveal the Quick Menu , press e to highlight Picture Size , then z or x to view the list of available PC formats. Use e or f to highlight the required format and OK to select. 26 W idescreen viewing (continued) Using the special functions to change the size of the displayed image (i.
27 Picture controls T o return to the original factory settings select Reset in the Picture Position menu and press OK . Picture P osition ( AT V only) The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs.
28 Picture controls (continued) When 3D Colour Management is selected it allows the ‘Base colour adjustment ’ feature to become available. 3D Colour Management In the Picture menu press e to highlight Advanced Picture Settings , press OK .
29 Picture controls (continued) When Active Backlight Control is activated it will automatically optimise the backlighting levels for dark scenes. Active Backlight Control In the Advanced Picture Settings menu press e to highlight Active Backlight Control .
Advanced Picture Settings 3D Colour Management Off Base Colour Adjustment Colour T emperature Auto Brightness Sensor Settings Active Backlight Control On Black/White Level 0 Static Gamma 0 Noise Reduction 30 Picture controls (continued) DNR enables you to ‘soften ’ the screen representation of a weak signal to reduce the noise effect.
Advanced Picture Settings Colour T emperature Auto Brightness Sensor Settings Active Backlight Control On Black/White Level 0 Static Gamma 0 Noise Reduction Resolution + Active Vision M100 On Advanced.
32 Picture controls (continued) In the PREFERENCES menu press e to select Panel Lock and choose On or Off using z or x . Panel lock disables the buttons on the television. All buttons on the remote control can still be used. P anel Lock When Panel lock is On , a reminder will appear when the buttons on the television are pressed.
33 Picture controls (continued) The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable.
The On Timer sets the television to turn on automatically to a selected channel at a certain time of day or after a certain length of time. Setting the On Timer 1 2 3 4 In the APPLICA TIONS menu, press e to select On Timer then press OK . Press e to highlight Enable On Timer , then z or x to select On .
35 The timers (continued) 5 Press OK to save the timer . The Green timer indicator on the front of the television will indicate that the timer has been set. NO TE: When an external input is selected in the Input option the Channel option will no longer be available.
3 6 D T V o n - s c r e e n i n f o r m a t i o n W h e n v i e w i n g i n d i g i t a l m od e , t h e o n -s c r e e n i n f o r m a t i o n g i v e s a c ce s s t o p r o g r a m m e d e t a i l s f o r a l l a v a i l a b l e c h a n n e l s .
DTV programme guide When viewing in digital mode, the programme guide gives access to programme details for all available channels. 37 Guide Select the on-screen guide by pressing GUIDE , the guide screen will appear highlighting details of the channel and programme currently being viewed.
The Parental Control feature allows the blocking of programmes according to their rating levels. It will only be available when a PIN number has been set. P arental Control 1 From the DTV Settings menu press e to select Parental Control and press OK .
Subtitle and Audio Subtitle T ype Normal Primary Subtitle Language English Secondary Subtitle Language English Audio T ype Normal Primary Audio Language English Secondary Audio Language English 39 DTV.
40 Software upgrade, licences, system information, reset TV This feature can be used to check the version of software currently installed. In DTV mode it includes additional diagnostic information such as signal strength, signal quality , frequency etc.
If Auto Start is enabled Media Player will automatically display the opening screen prompt when a USB device or SD card is connected. If Auto Start is set to Off Media Player can only be opened from the menu. In Media Player press e or f to select Auto Start .
42 Media player (continued) – multiview , single view , slideshow , interval and repeat T o display file information i.e. image number , image title, shot date and time, file size etc., press . The information will remain on screen for approximately 6 seconds or can be removed by pressing again.
43 Media player (continued) – playing movies, repeat mode, DivX® V O D The Movie feature plays DivX® movie clips stored on a USB storage device. In Media Player press e or f to select Movie then press OK . Press e or f to select a file or folder .
44 Media player (continued) – playing music, repeat mode The Music feature plays MP3 files stored on a USB storage device. In Media Player press e or f to select Music then press OK . Press e or f to select a file or folder . If there are more folders than will fit onto the screen use P P or P Q to move onto the next or previous page.
45 Media player (continued) – setting up the photo frame feature Photo Select Start Photo Edit Settings Photo Select Start Photo Edit Settings Rotate Delete This feature allows a photograph to be displayed on the screen of the television using the set as a photo frame.
PC Settings Horizontal P osition 0 V ertical P osition 0 Clock Phase 0 Sampling Clock 0 Reset 46 PC settings for RGB/PC connections – picture position, clock phase, sampling clock, reset 3 3 Use z or x to adjust until the picture clears. NOTE: The screen may be momentarily disrupted when adjusting PC settings.
47 Inputs TV B 1 B 2 B 3C HDMI 1 HDMI 2 HDMI 3 HDMI 4 PC 1 DVD 2 VCR/DVD 3 CBL/SA T 4 GAME/TV 5A U X REGZA-LINK REGZA -LINK controls This feature uses CEC (Consumer Electronics Control) technology and allows the control of T oshiba REGZA -LINK compatible equipment from the television remote control.
48 REGZA -LINK controls (continued), REGZA -LINK menus REGZA -LINK One T ouch Play When connected equipment is switched on REGZA-LINK will automatically detect the television through the input selection. If the television is in standby it will be switched on automatically .
49 TV Auto P ower The TV Auto Power setting allows the television to be automatically switched on or off if a REGZA-LINK device is turned on or off . In the PREFERENCES menu press e to select REGZA-LINK Setup then press OK . 1 Press e to highlight TV Auto Power On .
Input selection and A V connections 50 Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7 for a clear view of the back connection recommendations. Most media recorders and decoder send a signal through the SCART lead to switch the television to the correct Input socket.
51 Input selection and A V connections (continued) EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwith digital content protection, which is being standardized for reception of high-definition video signals.
PREFERENCES REGZA-LINK Setup Photo Frame Setup T eletext Auto P anel Lock Off Auto Format On 4:3 Stretch Off Blue Screen On Side P anel 1 T ext Information The TEXT button : T o view text services press TEXT . Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing.
Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. P rogrammes cannot be changed until this has been done. T o display a page of text: TEXT Press T to access the index/initial page.
A Make sure that the cables used have the HDMI logo on them ( ). Some early HDMI equipment may not work properly with the latest HDMI television products, due to new standard adoption.
Man ual Setti Manual Settings Colour System: Auto EXT2 A A The programme is currently being broadcast with an English soundtrack only . Why is the soundtrack in English when a different audio language has been selected? Q 55 Questions and Answers (continued) A Check all leads and connections.
A T eletext is only available when viewing a broadcasting channel. Why can ’t teletext by accessed when using a media recorder? Q 56 Questions and Answers (continued) A T ext has been selected whilst viewing an external source i.e. DVD or VCR. No text will appear on screen or a box may appear stating no information is available.
5 7 Q u e s t i o n s a n d A n s w e r s ( c o n t i n u e d ) A U s e t h e M a s t er P I N co d e o f 1 27 6 , t he n c h a n g e t o a n u m b e r o f y o u r c h o i c e . E n s u r e t ha t n o- o ne e l s e c a n u s e t h e M a s t er P I N b y r em o v in g t h e O w ne r’ s M a nu a l .
DISPOSAL… The following information is only for EU -member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product.
S p e c i f i c a t i o n s a n d a c c e s s o r i e s D VB - T B r oa d c a s t s y st e m s /c h a nn el s U K U H F 2 1 - 68 F ra nc e V HF 05 - 1 0 ( V H F 0 1 -0 5) U H F 21 -6 9 G e rm an y V H.
An important point after buying a device Toshiba 37XV625 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 37XV625 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 37XV625 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 37XV625 you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 37XV625 will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 37XV625, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 37XV625.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 37XV625. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 37XV625 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
