Instruction/ maintenance manual of the product 20RTH Toshiba
Go to page of 31
20-INCH PREMIUM TFT-LCD MONITOR 20RTH INSTRUCTION MANUAL Please read this manual thoro ughly before us e, and ke ep it handy for future reference..
SAFETY INSTRUCTION……………………………… …………………………………….2 – 3 1. Important Safety Instructions ………………………………… …………………………2 – 3 2. Safety Precautions ……………………………… ……………………………………….
Important Safety Instructions 1). Read these instructions 2). Keep these instructions.. 3). Heed all warnings. 4). Follow all instructions. 5). Do not use this apparatus ne ar water. 6). Clean only with dry cloth. 7). Do not block any ventilation opening s.
- The apparatus shall not be exposed to dri pping or spl ashing and that no objects filled with liquids, such as vases, shall be placed on the app aratus. - Minimum distances(e.g. 10cm)around the appa ratu s for sufficient ventilation. “ WARNING - To reduce th e risk of fire o r electric shock, do not expose the apparatus to rain or moisture.
CAUTION k The power supply cord is used a s the m a in disconne ct device, ensure that the socket-outlet is located/installed near the equipme nt and is ea sily accessible. ATTENTION N Le cordon d`alimentation est utillsé co mme interrupteur général.
NOTE This equipment has been tested a nd fou nd to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. T hese limits are designe d to provide rea sonable protection against harmful interference i n a residential installation.
A. BOTTOM PANEL CONTROL 1. DC 15V (12V) IN 2. COMPONENT Y,Pb,Pr & SOUND L,R 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN B. SIDE PANEL CONTROL 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 3. VIDEO 2(AV2) IN 4. VIDEO 2(AV2) OUT 5. S-VIDEO (Y/C) IN 6.
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay appears. 2. SOURCE Select pc or video( AV1/AV2/S-Video/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. MUTE Mute the sound.
D. FRONT KEY CONTROL 1. MENU Activates and exits the On Screen Display. 2. SOURCE Select PC or video source. Select On Screen Display menu 3 / 4. ▼ / ▲ This button allows user to enter t he sub-menu of the activated function 5 / 6. VOL ◀▶ Adjust the volume / Adjust menu settings.
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Custom sub menu. Press (◀) / right( ▶ ) button to adjust picture setting. Press the MENU button to save.
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode.
2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Color Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired color tone.
3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute. Press the MENU button to save. 4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume.
5. Size Press the up( ▲ ) / down( ▼ ) button to sel ect the Size. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Size. Press the MENU button to save. 6. NR Press the up( ▲ ) / down( ▼ ) button to sel ect the NR.
Press the ( ▶) or ENTER button and then up( ▲ ) / down( ▼ ) button to select on or off. Press the MENU button to save 6. PC (Only PC mode) Press the up( ▲ ) / down( ▼ ) button to sel ect the.
Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem ents.
1. PIP Press the up( ▲ ) / down( ▼ ) button to sel ect the PIP. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up( ▲ ) / down( ▼ ) button to sel ect the Input Source.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Input Source. Press the MENU button to save.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Size. Press the MENU button to save. 4. Position Press the up( ▲ ) / down( ▼ ) button to sel ect the Positi on.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Position. Press the MENU button to save. 5. Swap Press the up( ▲ ) / down( ▼ ) button to sel ect the Swap.
5. Sound Select Press the up( ▲ ) / down( ▼ ) button to sel ect the Soun d Select. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Sound Select.
D. SETUP MENU Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Setup me nu. Press the right( ▶ ) or ENTER button . 1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values.
2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Language menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect language.
3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the desire OSD Tone.
4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off.
5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lock menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to select on or off Press the MENU button to save.
Us e the VESA standard mount ing design and the 100m m hole pattern on the back panel to install the LCD monitor to the (optional) mounting bracket sold separately. Wall-mount Installation 1. Remove the monitor stand bracket assembled with the monitor.
▶ PIN ASSIGNMENTS ▶ ACCESSORY INSTRUCTION MANUAL ……………………………………… ……………………………………… 28 2. Power Cord 1.
This monitor features a power m anagement sy stem to “power d o wn” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal.
20“ 20.1 ˝ Diagonal AM-TFT(A ctive-Matrix) Pixel pitch(mm) : 0.255(H) x 0.255(V) BRIGHTNESS: 300cd/ ㎡ (Typical) CONTRAST RATIO: 800:1(Typical) VIEWING ANGLE: 178 ° /178 ° (H/V) LCD- Type RESPONSE TIME: 16msec(Typical) RESOLUTION (H x V) 1600X1200 @60Hz FREQUENCY HORIZONTAL: 31- 80KHz VERTICAL: 56-75Hz VIDEO(2ch input 1.
WEEE Symbols 31 ………………………………… ………………………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Wa.
An important point after buying a device Toshiba 20RTH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 20RTH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 20RTH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 20RTH you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 20RTH will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 20RTH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 20RTH.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 20RTH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 20RTH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
