Instruction/ maintenance manual of the product 21941 Beckett
Go to page of 2
BECKETT CLEANCUT BECKETT CLEANCUT INST ALLA TION INFORMA TION INST ALLA TION INFORMA TION GENERA TION INFORMA TION - ALL SYSTEMS IMPORT ANT INFORMA TION Long or oversized inlet lines may require the pump to operate dry during initial bleeding period. In such cases, the priming may be assisted by injecting fuel oil in the pump gearset.
Remove the shutter tab by using a pair of side cutter pliers and fi le sharp edges fl ush with burner surface. This will permit the shutter to be locked securely . Install the air shutter using the screw located below the pump. Adjust the shutter to the original air setting and tighten screw securely .
An important point after buying a device Beckett 21941 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beckett 21941 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beckett 21941 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beckett 21941 you will learn all the available features of the product, as well as information on its operation. The information that you get Beckett 21941 will certainly help you make a decision on the purchase.
If you already are a holder of Beckett 21941, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beckett 21941.
However, one of the most important roles played by the user manual is to help in solving problems with Beckett 21941. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beckett 21941 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
