Instruction/ maintenance manual of the product 220-14 Toro
Go to page of 2
Notice to Installer — This device must not be installed indoors. The Toro PVB (Pressure Vacuum Breaker) is designed to prevent backflow of contaminated water into the potable water system due to back-siphoning conditions only. This device should not be installed indoors or where backflow due to back pressure may occur.
Installation Requirements The following list of installation requirements is provided to assure maximum performance of the Toro PVB. Read this list completely prior to installation. ■ The installed height of the PVB, when measured at the Critical Level line, must be at least 12" (30.
An important point after buying a device Toro 220-14 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toro 220-14 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toro 220-14 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toro 220-14 you will learn all the available features of the product, as well as information on its operation. The information that you get Toro 220-14 will certainly help you make a decision on the purchase.
If you already are a holder of Toro 220-14, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toro 220-14.
However, one of the most important roles played by the user manual is to help in solving problems with Toro 220-14. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toro 220-14 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center