Instruction/ maintenance manual of the product SP-350 Top Innovations
Go to page of 13
Built for years o f care-free u se, Read These Instructions completely I before use. MODEL SP-350 Series Please read this m anual before using and keep for future reference.
Professional Style Steamer Dear Consumer Thank you for purchasing t he SteamFast ® Professional Style steamer. In order to prolong th e life of your steamer w e recommend that the water tank be drained between each us e if tap water i s being used. This will reduce liming as a result of hard water.
INTRODUCTION Congratulations o n your purchase of th e Steam Fast ® professional Steamer. You will find that the Steam Fast ® is easy to use and extremely versatile. Your new steamer provides professional results every time! 1. Holds over one half gallon o f water - enough for approximately 2.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, always follow basic safety precautions, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, d o no t pu t appliance in water o r other liquid.
LEARNING ABOUT YOUR STEAMER Please refer to the picture fo r each point (1) The control HANDLE on th e end of the hose sits just before the nozzle. The HANDLE is d esigned to be heat free an d i s safe to grasp. Use the HANDLE to aim t he direction of the steam released from the nozzle.
STEAMER ASSEMBLY STEP 1 - ATTACHING THE ROD A. Se t t h e appliance on a steady surface. B. T h e Rod i s shipped in a collapsed position and must be extended for use. Take the Ro d and loosen the T o p Knurled Knob slightly b y rotating it counter - clockwise.
STEAMER OPERATION A. Set th e unit o n the floor a nd remove the water container. B. Check the inside of the cont ainer the sedime nt . If present rins e th e container and follo w ing the Removing Mineral Buildup procedure found later i n this manual.
PRESSING WITH STEAM 1. Grasp th e control handle with th e nozzle facing upward. Beginning at th e bottom of th e fabric will allow the steam to rise inside an d outside removing wrinkles. Slowly move t he nozzle from t he bottom to t he t o p o f t he fabric.
Drain the unit b y removing the drain plug (located at the side o f the main unit - see P.4 #1 1). This will allow contents of the reservoir (main unit) t o drain. Tipping the unit in the direction o f th e drain plug to remove any remaining water. Replace the drain plug.
OTHER IMPORTANT NOTES During operation t h e steamer hose may gurgle . a. This is a normal result of condensation collecting inside th e hose. Simply lift the control handle upward until the hose is extended t o i t s full height.
TROUBLE SHOOTING THE STEAMER PROBLEM CAUSE SOLUTION Steamer fails to heat Steamer n ot plugged in Plug in to electrical outlet Auto shut off engaged check water container.
Removing Mineral Buildup One common problem with steamers is mineral buildup caused b y t he high mineral content in many municipal water supplies. Mineral residue inside of the internal pipes and heater can cause intermittent steaming o r i n severe cases n o steaming at all.
Reassembling The Water Tank Valve C a p I f th e plunger becomes separated from t he Valve Cap, follow the following procedure. A . Grab th e Value C a p Assembly and rotate i t counter clockwise about 1/8th of a t urn. Lift straight up t o remove t he cap.
An important point after buying a device Top Innovations SP-350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Top Innovations SP-350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Top Innovations SP-350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Top Innovations SP-350 you will learn all the available features of the product, as well as information on its operation. The information that you get Top Innovations SP-350 will certainly help you make a decision on the purchase.
If you already are a holder of Top Innovations SP-350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Top Innovations SP-350.
However, one of the most important roles played by the user manual is to help in solving problems with Top Innovations SP-350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Top Innovations SP-350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
