Instruction/ maintenance manual of the product SF-475 Top Innovations
Go to page of 16
by T op Innovations, Inc. Please read all instructions befor e use. Mail in your warranty r egistration card. MODEL SF-475 Fabric Steamer.
Dear V alued Customer , Congratulations on purchasing your new SF-475 Fabric Steamer . This powerful product is designed to effectively smooth wrinkles and reduce odors with a minimum of time and effort. T urn your Fabric Steamer on, and in minutes you are ready to delicately remove wrinkles from garments, draperies and upholstery .
3 T op Innovations, Inc. W ARNING: T o reduce the risk of fire, electrical shock, or injury , the following basic safety precautions should always be followed when using an electrical appliance. SA VE THESE INSTRUCTIONS! FOR HOUSEHOLD USE ONL Y IMPOR T ANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING YOUR F ABRIC STEAMER 1.
4 T op Innovations, Inc. W ARNING: T o reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way . If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet.
5 T op Innovations, Inc. The following features and accessories are included with your Steam Cleaner . Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. T o obtain possible missing parts, refer to the Customer Support section on page 13 of this manual.
6 T op Innovations, Inc. • The Pole T op (1) is comprised of the Steam Nozzle Holder (1a) and the Clothes Hanger Hook (1b). The Steam Nozzle Holder provides a safe and convenient place to hang the Steam Nozzle . The Clothes Hanger Hook allows you to steam garments that are hanging from a clean, rust-free hanger .
7 T op Innovations, Inc. FIGURE 3 A TT ACHING THE TELESCOPIC POLE 1. Attach Pole T op by sliding it onto top of T elescopic Pole as shown (FIGURE 1). Note that Pole T op must align correctly in two grooves that run the length of pole.
8 T op Innovations, Inc. A SSEMBLING THE F ABRIC S TEAMER CONNECTING HOSE 1. Slide Hose fitting onto threaded Hose Base (FIGURE 5) 2. T urn Hose fitting clockwise to secure it to Hose Base (FIGURE 6). NOTE: Hand-tighten Hose fitting only . Do not over-tighten.
9 T op Innovations, Inc. U SING THE F ABRIC S TEAMER FILLING W A TER RESER VOIR WITH W A TER 1. Place Fabric Steamer on a flat, level surface. 2. Make sure Lighted On/Off Switch is set to “Of f” position and grounded power cord is unplugged from electrical outlet.
10 T op Innovations, Inc. U SING THE F ABRIC S TEAMER OPERA TING THE F ABRIC S TEAMER NOTE: Be sure that any desir ed attachments are connected and W ater Reservoir is filled before following these steps. 1. Plug grounded power cord into a convenient 3-prong electrical outlet.
11 T op Innovations, Inc. C ARE &S TORAGE G UIDELINES PROPER STORAGE Preparing your Fabric Steamer for storage is quick and simple. When you have fin- ished your steaming tasks, follow the steps listed below . 1. Unplug grounded power cord from electrical outlet.
12 T op Innovations, Inc. T ROUBLESHOOTING G UIDE PROBLEM POSSIBLE CAUSE SOLUTION Unit fails to steam. Lighted On/Off Switch does not illuminate. Unit is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse.
13 T op Innovations, Inc. T ROUBLESHOOTING &C USTOMER S UPPOR T CUSTOMER SUPPOR T For problems with your Fabric Steamer , please refer to the troubleshooting solutions located on pages 12 & 13 of this manual. Additional inquiries should be directed to our Customer Support services through our W eb site, www .
14 T op Innovations, Inc..
15 T op Innovations, Inc. ONE YEAR LIMITED W ARRANTY (If outside USA, additional shipping charges may apply) T op Innovations, Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase.
T op Innovations, Inc. 6655 T roost A ve. Kansas City , MO 64131 T el: (800) 711-6617 (816) 584-9700 www .steamfast.com customerservice@topinnovations.
An important point after buying a device Top Innovations SF-475 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Top Innovations SF-475 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Top Innovations SF-475 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Top Innovations SF-475 you will learn all the available features of the product, as well as information on its operation. The information that you get Top Innovations SF-475 will certainly help you make a decision on the purchase.
If you already are a holder of Top Innovations SF-475, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Top Innovations SF-475.
However, one of the most important roles played by the user manual is to help in solving problems with Top Innovations SF-475. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Top Innovations SF-475 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
