Instruction/ maintenance manual of the product AM24, AM36, AM48 Toastmaster
Go to page of 34
T oastmaster ® A Middleby Company OWNER'S OPERA TING & INST ALLA TION MANUAL AM24, AM36 & AM48 ACCU-MISER GRIDDLES Part No. 32025 Price $15.
i © 1995 Toastmaster Toastmaster • 1400 Toastmaster Dr. • Elgin, IL 60120-9272 • (708) 741-3300 • FAX (708) 741-4406 Middleby Corp 24 Hour Service Hotline 1-800-238-8444 T oastmaster ® GRIDD.
IN CASE OF FIRE 1. De-energize griddle at disconnect switch. This will cut off power to the heating elements allowing griddle to cool. This reduces the flash point temperature making it easier to stop the fire. 2. Cover the affected area with a heavy blanket or canvas.
iii T ABLE OF CONTENTS SECTION 1 DESCRIPTION ........................................................................................ 1 Component Location ................................................................................. 2 Specification Chart .
SECTION 1 - DESCRIPTION 1 SECTION 1 DESCRIPTION ACCU-MISER (AM) SERIES GRIDDLES ARE: • Electrically heated • Heated by infrared emitter panels • Counter top mounted • Thermostat solid state controller MODELS: • AM24 (24" wide) • AM36 (36" wide) • AM48 (48" wide) INFRARED HEAT PANELS.
SECTION 1 - DESCRIPTION 2 Component Location Figure 1-2.
SECTION 1 - DESCRIPTION 3 NOTICE Toastmaster (Manufacturer) reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improve- ments, additions or replacements for previously purchased equipment.
SECTION 1 - DESCRIPTION 4 Griddle Electrical Specification Chart Voltage Total Loading kW/Phase Nominal Amps/Line Wire Minimum Breaker Supply Wire Rating* (AWG) Gauge* kW 3 Ph 3 Ph 1 Ph 3 Ph 1 Ph 3 Ph 1 Ph X-Y Y-Z X-Z X Y Z AM24 208 6.2 3 .1 3.1 -- 15.
SECTION 1 - DESCRIPTION 5 Griddle Dimension Drawing.
SECTION 1 - DESCRIPTION 6 NOTES.
SECTION 2 - INSTALLATION 7 SECTION 2 INSTALLATION A. Inspect for Shipping Damage All shipping containers should be examined for dam- age before and during unloading. This equipment was carefully inspected and packaged at the factory. The freight carrier has assumed responsibility for its safe transit and delivery.
SECTION 2 - INSTALLATION 8 D. Installing Griddle on Accessory Stand. NOTE: If you are installing the griddle on a counter do not do Step D. Go directly to Step E. Accessory stands are available for all Accu-Miser Griddles. See the following Accessory Stand List.
SECTION 2 - INSTALLATION 9 3. Turn stand right side up and secure to griddle with 3/8-16 bolts and lockwashers as shown in Figure 2-2. NOTE: Be sure the casters with brakes are located at the front of the griddle.
SECTION 2 - INSTALLATION 10 E. Electrical Connection Be sure your electrician provides the proper wire gauge with a capacity for carrying the voltage required. Wire capacity is listed on the serial number data plate. Wire capacity and electrical specifications are listed in Section 1 of this manual.
SECTION 2 - INSTALLATION 11 F. Initially Clean the Griddle 1. Clean the rust preventive material from the griddle surface with a non-flammable grease solvent. 2. Wash the griddle with warm water and a mild detergent. 3. Rinse with a damp cloth and wipe dry.
SECTION 2 - INSTALLATION 12 NOTES:.
SECTION 3 - OPERATION 13 SECTION 3 OPERATION I . Location and Function of Controls The following information provides a basic description of the griddle operator components, their location and the function they perform.
SECTION 3 - OPERATION 14 Figure 3-2 Control Panel A. CONTROLS All oven operating controls are on the control panel. • Thermostat Control Knob - The thermostat control knob is used to adjust the corresponding element section above it to your temperature requirements.
SECTION 3 - OPERATION 15 B. Seasoning the Griddle 1. Preheat the griddle to 300°F (149°C) and spread a light film of unsalted cooking oil or fat over the surface with a soft cloth. 2. Allow griddle to stand this way for two minutes to give the oil an opportunity to work into the pores of the metal and to form a smooth coating over the outside.
SECTION 3 - OPERATION 16 b. At the end of each day of operation or at the end of each shift thoroughly clean the grease trough and the spout into grease drawer. c. Clean the griddle surface with a pumice or griddle stone by rubbing with the grain of the metal while the griddle surface is still warm.
SECTION 3 - OPERATION 17 F. Time and Temperature Guide NOTE: All cooktimes are approximate. FOOD CONTROL TIME ADVANCE SETTING IN MINUTES PREPARATIONS Canadian Bacon 350°F(176°C) 3 to 4 Slice (not too far in advance as meat will darken)-Split edges to prevent curling.
SECTION 3 - OPERATION 18 G. Cooking Capacities NOTE: All production capacities are approximate. MODEL LOAD CAPACITY CAPACITY PER HOUR HAMBURGERS EGGS 4 "PANCAKES HAMBURGERS EGGS 4" PANCAKES .
SECTION 4 - PARTS LIST 19 SECTION 4 PARTS LIST.
SECTION 4 - PARTS LIST 20 Figure 4-1 Overall Exploded Drawing.
SECTION 4 - PARTS LIST 21 Parts List for Figure 4-1 Overall Exploded Drawing AM24 AM36 AM48 Item Qty Part Qty Part Qty Part Description # ### 1 1 30979 1 30988 1 30992 Front Panel Assembly 2 4 2000620.
SECTION 4 - PARTS LIST 22 NOTES:.
SECTION 5 - SCHEMATICS 23 SECTION 5 SCHEMA TICS.
SECTION 5 - SCHEMATICS 24.
SECTION 5 - SCHEMATICS 25.
SECTION 5 - SCHEMATICS 26.
SECTION 5 - SCHEMATICS 27.
SECTION 5 - SCHEMATICS 28.
SECTION 5 - SCHEMATICS 29.
SECTION 5 - SCHEMATICS 30 T oastmaster® 1400 Toastmaster Drive Elgin, IL 60120 (708)741-3300 Part No. 3102549 Price $15.00 Printed in U.S.A. For more information on the complete line of Toastmaster® products, contact your Food Service Equipment Dealer, or write to us at the address below.
An important point after buying a device Toastmaster AM24, AM36, AM48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toastmaster AM24, AM36, AM48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toastmaster AM24, AM36, AM48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toastmaster AM24, AM36, AM48 you will learn all the available features of the product, as well as information on its operation. The information that you get Toastmaster AM24, AM36, AM48 will certainly help you make a decision on the purchase.
If you already are a holder of Toastmaster AM24, AM36, AM48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toastmaster AM24, AM36, AM48.
However, one of the most important roles played by the user manual is to help in solving problems with Toastmaster AM24, AM36, AM48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toastmaster AM24, AM36, AM48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
