Instruction/ maintenance manual of the product WM-4310 TOA Electronics
Go to page of 8
OPERA TING INSTR UCTIONS UHF WIRELESS MICR OPHONE WM-4310 WM-4310A WM-4310H Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. T ABLE OF CONTENTS 1.
2 • To prevent the electromagnetic wave from badly influencing medical equipment, make sure to switch off the unit's power when placing it in close proximity to the medical equipment.
3 2. GENERAL DESCRIPTION The wireless microphone WM-4310 is of lavalier type, while the WM-4310A and WM-4310H are of headset type, and all are designed for use on UHF band. The WM-4310/-4310A/-4310H accommodate the supplied microphone unit or headset with a cardioid pick-up pattern and are suitable for speech reinforcement applications.
Plug lock ø3.5 Windscreen Gooseneck Adjustable band Microphone [ Headset ] (WM-4310A only) Windscreen ø3.5 Plug lock Gooseneck Microphone [ Headset ] (WM-4310H only) 4 5. NOMENCLA TURE Power/Battery lamp (Orange LED) Power ON/OFF switch (push lock) Audio level control Clip (Rotates 360 ° .
5 6. B A TTER Y INSERTION Step 1. Holding the microphone body, slide the battery cover down to open it. The battery cover is designed not to be removed from the body. Step 2. Insert the battery 6LR61 (Alkaline 9 V) according to the instructions attached to the inside of the battery compartment.
6 10. CHANNEL NUMBER SETTING Step 1. Slide the battery cover down to open it. Step 2. Using the supplied screwdriver, set the Channel setting switch pointer to the desired channel number. Step 3. Replace the battery cover. Note: Make sure that the wireless microphone is identical to the wireless tuner in the channel number.
7 Microphone Element Electret condenser type, cardioid pattern Emission F3E Frequency Range 690 – 865 MHz, UHF Selectable Channel 16 channels RF Carrier Power Less than 50 mW Tone Frequency 32.
Printed in Taiwan 133-07-182-30 Main unit Emission F3E Frequency Range 690 – 865 MHz, UHF Selectable Channel 16 channels RF Carrier Power Less than 50 mW Tone Frequency 32.
An important point after buying a device TOA Electronics WM-4310 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics WM-4310 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics WM-4310 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics WM-4310 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics WM-4310 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics WM-4310, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics WM-4310.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics WM-4310. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics WM-4310 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
