Instruction/ maintenance manual of the product SLDVT-35 TOA Electronics
Go to page of 24
CARE AND OPERA TION INSTRUCTIONS A French manual is available upon request. Order P/N 506010-01CF Ce manuel d’installation est disponible en francais, simplement en faire la demande. Numéro de la pièce 506010-01CF MODELS INST ALLER: Leave this manual with the appliance.
2 The Milli volt appliances have a millivolt gas cont rol val ve with pie zo ignit ion sys tem prov ides safe, efficient operation. If any optional acces- sories which require electrical power are being installed, the electrical power must be provided at the time of appliance installation.
3 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. T est gauge connections are provided on the front of the millivolt gas control valve, identi- fied IN for the inlet and OUT for the manifold side (see Figure 3 on Page 4) .
4 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Millivolt Appliances - Appliances with Millivolt systems will be fitted with the gas control valve shown in Figure 3. Electronic Appliances - Appliances with electronic systems will be fitted with the electronic valve shown in Figure 4.
5 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. 2. During the first initial burns of these appli- ances, there will be some odor emitted (see Burn-In Period on Page 3 ) . 3. Keep the lower control compartment clean by vacuuming or brushing at least twice a year .
6 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Front Glass Enclosure Panel, Removal and Installation Figure 5 - INST ALLING GLASS DOOR WARNING: Do not ope rat e appl i- anc e wit h the gla ss fro nt r emo ved , cra ck ed or br oke n. Rep lac eme nt of the g la ss shou ld be done by a licensed or qualified service tec hn ici an.
7 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. REFERENCE Firebox Accessories / Parts Cat. No. M o d el N o. Description 88L53 FGE Bag of Glowing Embers (1 oz.
8 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. SLDVT -35 LOG PLACEMENT Figure 8 Log Number Description 1 Left Front Log 2 Right Front Log 3 Left Rear Log 4 Right Rear Log Catalog Number for t.
9 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Figure 9 SLDVT -40 LOG PLACEMENT Log Number Description 1 Ember Chunk 2 Left Front Log 3 Right Front Log 4 Left Rear Log 5 Right Rear Log Align hole at the bottom of left front log (2) over the left front bracket and the right front log over the right front bracket.
10 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. BURNER ADJUSTMENTS (QUALIFIED TECHNICIANS ONL Y) Flame Appearance and sooting Proper flame appearance is a flame which is blue at the base and becomes yellowish-orange in the body of the flame.
11 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Main Burner Factory Air Shutter Opening Setting - Inches (millimeter) Model Natural Gas Propane Gas SL DV T -3 5 1/ 32 " (0 .7 95 m m) 3/ 16 " (4 .7 63 m m) SL DV T -4 0 1/ 32 " (0 .
12 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. WIRING DIAGRAMS Wiring diagrams are provided here for reference purposes only . This information is also provided on schematics attached directly to the appliance on a pullout panel located within the control compartment.
13 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. ACCESSORY COMPONENTS Remote Control Kit, Standard Cat. No. Model No. Description H0249 RCL Remote Control System (Standard) (ref. Form # 750,127M) Remote Control Kit, Deluxe Cat. No. Model No. Description H025 1 RCL- ST AT Remote Control System (Deluxe) (ref.
14 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Style View Screen Doors - These Style View doors are easy to install and will not require hardware to atach them to the standard glass door frame. The Style View door installs over the standard glass enclosure panel and provides a barrier to prevent direct contact with the hot glass surface.
15 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Bag of Glowing Embers Bag of Volcanic Stone Replacement ember materi- als or volcanic stone are available for use with these appliances. Order kits as part of the periodic maintenance of the appliance.
16 LIGHTING INSTRUCTIONS – MILLIVOL T GAS VAL VE FOR YOUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lighted with a piezo ignitor . When lighting the pilot, follow these instructions exactly . B. BEFORE OPERA TING smell all around the appliance area for gas.
17 INSTRUCTIONS D’ALLUMAGE – V ANNE GAZ MILLIVOL T INSTRUCTIONS D'ALLUMAGE P O U R VO TR E S É C U RI TÉ , L I S E Z C ES I N S T R U C TI ON S A V A N T L ’A LL U M A G E A. Cet appareil est muni d’une veilleuse qui doit être allumée avec un allumeur piézo-électrique.
18 A. When lighting the appliance, follow these instructions exactly . B. BEFORE OPERA TING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor . WHA T TO DO IF YOU SMELL GAS • Extinguish any open flame.
19 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. INSTRUCTIONS D’ALLUMAGE — ELECTRONIC INSTRUCTIONS D’ALLUMAGE PO UR VO TR E SÉ C UR IT É, L I SE Z CE S I NS TR UC TI ON S A VA NT L ’A L LU MA GE A. Lorsque vous allumez l’appareil, suivez exactement ces instruc - tions.
20 MAINTENANCE T ASK ACCOMPLISHING PERSON PROCEDURE Inspecting/Cleaning Burner , Logs and Controls Qualified Service T echnician Inspect valve and ensure it is properly operating. Check piping for leaks. Vacuum the control compartment, fireplace logs and burner area.
21 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. TROUBLESHOOTING GUIDE - MILLIVOL T GAS CONTROL SYSTEM No te : Be fo re tr oub le sh o ot ing th e g as c on tr ol sy ste m, E ns ur e e xt e rn al gas sh ut o ff va lv e, lo cat ed a t gas su pp ly in let , ( an d wa ll s w it c h, if f a ppl ic ab l e) , i s in t he “O N” po si t io n.
22 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. TROUBLESHOOTING THE ELECTRONIC IGNITION SYSTEM SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION Check voltage on AC terminals of module an/or batteries. The value should be around 2.7 to 3.2 V AC. Confirm that wire connections are secure.
23 NOTE: DIAGRAMS & ILLUSTRA TIONS ARE NOT TO SCALE. Item No. Description SLDVT -35 SLDVT-40 Part No. Qty . Part No. Qty . 1 Hood H7266 1 H7267 1 2 Lower Control Compartment Panel H7262 1 H7263 1 .
24 REPLACEMENT P ARTS Printed in U.S.A. © 2008 by LENNOX HEARTH PRODUCTS P/N 506010-01 REV . N/C 08/2008 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.
An important point after buying a device TOA Electronics SLDVT-35 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics SLDVT-35 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics SLDVT-35 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics SLDVT-35 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics SLDVT-35 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics SLDVT-35, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics SLDVT-35.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics SLDVT-35. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics SLDVT-35 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
