Instruction/ maintenance manual of the product i12 TOA Electronics
Go to page of 16
T12 & i12 USER MANUAL.
.
CONTENTS 1. Introduction 2. Unpacking 3. Connectors/Cabling 4. Polarity Checking 5. Amplification & Power Handling 6. Crossovers 7. Equalisation 8. Dimensions 9. Rigging 10. Performance Data 11. Technical Specifications 12. T12 & i12 Recommended Service Parts & Accessories 13.
1. Introduction The Tannoy T12 and i12 professional loudspeakers have been designed for a wide variety of sound reinforcement applications requiring extended frequency response from a compact system, capable of delivering high sound pressure levels with extremely low distortion, resulting in outstanding clarity, definition and detail.
Should you encounter any problems obtaining Speakon connectors, please contact Neutrik or its distributors directly on the following numbers:- UK: N EUTRIK M ARKETING: 0171 792 8188 USA: N EUTRIK USA I NC.
5. Amplification & Power Handling As with all professional loudspeaker systems, the power handling is a function of voice coil thermal capacity. Care should be taken to avoid running the amplifier into clip (clipping is the end result of overdriving any amplifier).
7. Dimensions.
.
8. Performance Data.
.
.
11. Technical Specifications Frequency response (1) +/- 3dB 70Hz - 25kHz 45Hz - 25kHz (with Tx2 controller) Recommended Amplifier Power 200 - 400 watt / 8 ohm Power Handling Average(2) Programme Peak (10ms) 200 watt 400 watt 800 watt Sensitivity (1) 2.
12. T12 & i12 Service Parts & Accessories Part Number Description 7900 0433 Driver Kit - 3142 7900 0441 Recone Kit - 3142 7900 0199 HF Diaphragm Kit 7300 0158 Crossover Kit - 1206 7900 0442 Pa.
14. Wall Mounting Bracket - Assembly Instructions A dedicated wall mounting bracket (Part No. 8000 0648) is available for the T12 & i12.The design of the bracket allows the loudspeaker to mounted .
Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment.
Tannoy Loudspeakers are manufactured in Great Britain by : Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, Strathclyde, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Internet: http://www.tannoy.com Tannoy North America Inc.
An important point after buying a device TOA Electronics i12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics i12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics i12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics i12 you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics i12 will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics i12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics i12.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics i12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics i12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
