Instruction/ maintenance manual of the product F-1300W TOA Electronics
Go to page of 18
OPERA TING INSTRUCTIONS SPEAKER SYSTEMS F-1300B F-1300BT F-1300BTWP F-1300W F-1300WT F-1300WTWP Thank you for purchasing TOA's Speaker System. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
2 T ABLE OF CONTENTS 1. SAFETY PRECAUTIONS ................................................................................. 3 2. GENERAL DESCRIPTION .............................................................................. 4 3. FEA TURES .......
3 When Installing the Unit • Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket. Doing otherwise may result in the unit falling down and causing personal injury and/or property damage. • Do not use other methods than specified to mount the bracket.
4 2. GENERAL DESCRIPTION TOA's F-1300 Series Speakers are compact two-way speaker systems designed for high efficiency, wide range, and high power input handling capability. These speaker systems can be installed and used in many different applications with combined use of the supplied accessories and/or the optional mounting brackets.
5 5. IMPEDANCE CHANGE (F-1300BT, F-1300BTWP, F-1300WT, and F-1300WTWP only) To change the impedance, use a standard screwdriver to rotate the rotary switch on the speaker's rear to select the desired input power. Note: The switch is factory-preset to 330 Ω .
6 7. NOTES ON OUTDOOR INST ALLA TION (F-1300BTWP and F-1300WTWP only) • Be sure to mount the speaker in a vertical (portrait-style) orientation. • Adjust the speaker's tilt angle within the shaded range shown below.
7 8. INST ALLA TION 8.1. Using the Supplied Brackets The speaker system is supplied with the following brackets. Use these brackets properly depending on the installation location and intended application. 30º [W all bracket] [Joint bracket] [Speaker bracket] 8.
8 8.3. W all Mounting Use the supplied wall bracket, joint bracket, and speaker bracket to permit adjustment of the horizontal and vertical* speaker coverage angles. * Vertical installation. Horizontal: Max. 75º, Vertical: Max. 45º downward Horizontal installation.
9 Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speaker angle, then tighten the screws. Note: Match the orientation of the arrows on both the wall bracket and joint bracket. Step 3. Attach the speaker bracket to the speaker's rear using the supplied screws.
10 8.4. Ceiling Mounting Use the supplied joint bracket and speaker bracket. Note Speaker coverage angles can only be adjusted in the vertical direction (Max. 45º downward). Adjust the speaker's tilt angle within the shaded range shown below. Vertical orientation [Installation example] [Speaker angle vs.
11 Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket and loosely securing the fixing bolt for temporary speaker installation. Step 4. Connect the speaker cable to the input terminal. Note Use a terminal cover when installing the speaker outdoors.
12 8.5. Speaker Stand Mounting The speaker can be mounted on the optional ST-16A Speaker Stand using the supplied joint bracket and speaker bracket. [Installation example] Note Mount the speaker so that it faces within the range of 15º upward and downward.
13 8.6. Pole Mounting (F-1300BTWP and F-1300WTWP only) To mount the speaker on a pole with diameter of 10 – 34 cm (3.94 – 13.39"), use the supplied wall bracket, joint bracket, and speaker bracket in combination with the optional YS-60B Pole Band.
14 Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speaker angle, then tighten the screws. Note Match the orientation of the arrows on both the wall bracket and joint bracket. Step 3. Attach the speaker bracket to the speaker's rear using the supplied screws.
15 Step 2. Wipe clean the mesh grill and speaker cabinet with a soft cloth dampened in a detergent. Note Do not use thinner or other volatile liquids to clean the grill and cabinet. Step 3. Use spray paint to apply thin coat evenly overall the speaker.
16 10. SPECIFICA TIONS 10.1. F-1300B and F-1300W F-1300B F-1300W Bass-reflex type 50 W (continuous pink noise) 150 W (continuous program) 8 Ω 90 dB (1 W, 1 m) at installation in a semianechoic field .
17 F-1300BT F-1300WT Bass-reflex type 30 W 100 V line: 330 Ω (30 W), 1 k Ω (10 W), 3.3 k Ω (3 W), 10 k Ω (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 k Ω (5 W), 3.
F-1300BTWP F-1300WTWP Bass-reflex type 30 W 100 V line: 330 Ω (30 W), 1 k Ω (10 W), 3.3 k Ω (3 W), 10 k Ω (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 k Ω (5 W), 3.
An important point after buying a device TOA Electronics F-1300W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TOA Electronics F-1300W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TOA Electronics F-1300W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TOA Electronics F-1300W you will learn all the available features of the product, as well as information on its operation. The information that you get TOA Electronics F-1300W will certainly help you make a decision on the purchase.
If you already are a holder of TOA Electronics F-1300W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TOA Electronics F-1300W.
However, one of the most important roles played by the user manual is to help in solving problems with TOA Electronics F-1300W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TOA Electronics F-1300W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
