Instruction/ maintenance manual of the product 10BOXJAMBFM BEA
Go to page of 2
Page 1 of 2 75.0092 V4 Jan 2004 [Rev. 1 / 26 / 2004 ] PRODUCT DESCRIPTION COMPONENT ID SAFETY PRECAUTIONS BEA’s line of pushplate hardware is expanded by its line of surface and flush mount pushplate boxes.
Page 2 of 2 75.0092 V4 Jan 2004 [Rev. 1 / 26 / 2004 ] COMPANY CONTACT MECHANICAL INSTALLATION 1. Prepare the box for installation. If the pushplate is to be hard - wired to the operator, remove either the knockout on the back or bottom of the box. Then route the appropriate wire to the box.
An important point after buying a device BEA 10BOXJAMBFM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BEA 10BOXJAMBFM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BEA 10BOXJAMBFM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BEA 10BOXJAMBFM you will learn all the available features of the product, as well as information on its operation. The information that you get BEA 10BOXJAMBFM will certainly help you make a decision on the purchase.
If you already are a holder of BEA 10BOXJAMBFM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BEA 10BOXJAMBFM.
However, one of the most important roles played by the user manual is to help in solving problems with BEA 10BOXJAMBFM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BEA 10BOXJAMBFM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
