Instruction/ maintenance manual of the product 1031 Tiptel
Go to page of 20
Manual (en) Feature Phone with hands-free operation and telephone book tiptel 1030 tiptel 1031 tiptel.
.
Contents 3 Contents Contents .......................................................................................................... 3 Safety notices ..................................................................................................
Contents 4 Appendix .......................................................................................................... 16 Troubleshooting .......................................................................................... 16 Power failure .
Safety notices 5 Safety notices Please observe the following very closely when setting up, connecting and using the telephone: Only plug the connection cables into sockets designated for this use. Lay the connection cables such that they do not pose any risk of accidents.
Safety notices 6 Product features Commercial grade high-quality speakerphone LCD displays phone numbers, date and time Hands free (half duplex) Message Waiting Indication (FSK) 60 .
Button allocation 7 Button allocation 1 LCD Display Displays the phone number, date and time and other information. 2 X / MENU a. Press to delete or edit the phone book and one-touch memories. b. Press for min. 3 secs to enter the main function settings.
Button allocation 8 6 / P a. In on-hook status press to review the outgoing number. b. In off-hook status press to dial the last dialed number. c. Insert a pause of 1.2 / 2.4 or 3.6 secs while editing the phone book or pre-dialing a number. 7 Press to mute the line (microphone mute).
Installation 9 Installation 1. Connect one end of the coil cord to the jack of the handset (15), connect the other end to the jack of the base unit. 2. Plug one end of the flat cable to the line jack (16) of this phone, plug the other end to the telephone wall socket.
Function Setup 10 F unction setup Every function setup is available by using ju st a single key. In on-hook status, press X/MENU for a minimum of 3 seconds to enter the function menu. Pressing the very same key X/MENU repeatedly will show the different functions available one after another.
Function Setup 11 Set the Ring Melodies After set up the EXT. NO., press X/MENU to access the RING MELODIES setup. Press to select the melody (1-16) an d press X/MENU to confirm. Set the Ring Volume After set up the RING MELODIES, press X/MENU to access the RING VOLUME setup.
Operation 12 Operation Make a Call Pick up the handset or press to get dial tone and dial the number. Use X/MENU to edit the number. When the called party answers the phone, the LCD will time the call automatically. In pulse dialing mode it is possible to temporarely switch to DTMF (tone dialing) mode during a call pressing * .
Operation 13 Note: Please, check flash timing in case of problems. PABX setting usually is 100 ms while network providers may use 100 ms or 300 ms. Please, ask your network provider or PBX installer (in case this device is used behind a PABX) for the appropriate setting.
Operation 14 Caller ID list Review In on-hook status, press to review the caller’s phone number and the time they called. Delete When you check the incoming calls, press to find the call you wish to de- lete. Press X/MENU once shortly to delete a single call.
Operation 15 Dial from Phone Book In on-hook status, when reviewing the phone book and finding the number you wish to dial, press or pick up the handset to dial the stored phone number. Reset complete device back to factory settings In on-hook mode, press R for more than 8 seconds.
Appendix 16 Appendix Troubleshooting If you have difficulties on your phon e’s operation, the suggestions below should solve the problems: Problem Possible cause Solution/recommendation No display, no dial tone Connector cable not making contact. Check all cables and plug connections.
Appendix 17 Power failure The internal clock stops if there is a power failure in the telephone network. All set- tings are retained however, meaning the settings stay as they were before when power is restored. All you need to do is reset the clock. Technical data Dimensions (W x H x D): 210 x 153 x 100 mm Weight: approx.
Appendix 18 Guarantee Tiptel provides a voluntary guarantee on the device, the conditions of which are published on http://www.tiptel.com. The guar antee conditions applicable at the time of purchase apply. The original sales slip (receipt, bill) with serial number and/or IMEI number is used as proof of purchase.
.
Tiptel.com GmbH Business Solutions Halskestraße 1 40880 Ratingen Deutschland Tel.: 0900 100–84 78 35* Vanity Tel.: 0900 100–TIPTEL* Internet: www.
An important point after buying a device Tiptel 1031 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tiptel 1031 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tiptel 1031 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tiptel 1031 you will learn all the available features of the product, as well as information on its operation. The information that you get Tiptel 1031 will certainly help you make a decision on the purchase.
If you already are a holder of Tiptel 1031, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tiptel 1031.
However, one of the most important roles played by the user manual is to help in solving problems with Tiptel 1031. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tiptel 1031 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
