Instruction/ maintenance manual of the product VMD 22 THOMSON
Go to page of 102
User manual VMD 22 35126140-vmd22-GB 1/08/00 14:23 Page Cov1.
EN DIGITAL VIDEO CAMERA INSTRUCTIONS VMD22 ENGLISH CONTENTS AUTOMA TIC DEMONSTRA TION 5 GETTING ST ARTED 6 – 15 RECORDING 16 – 39 Basic Recording For Video ........................ 16 Basic Recording For Digital Still Camera (D.S.C.) .. 19 Basic Recording For Video And D.
2 EN This camcorder is designed to be used with P AL-type colour television signals. It cannot be used for playback with a television of a different standard.
EN 3 Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry . There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user .
4 EN PROVIDED ACCESSORIES • Core Filter x 2 (for optional S-V ideo cable and Audio/V ideo (RCA plug – RCA plug) cable) • AC Power Adapter/Charger AC 2200 • Remote Control Unit TC 200 M • DC .
EN 5 AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “DEMO. MODE” is set to “ON” (factory-preset). A vailable when the POWER Switch is set to “ ” and no cassette is in the camcorder . Performing any operation during the demonstration stops the demonstration temporarily .
6 EN GETTING ST ARTED Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Char ger .
EN 7 1 2 T o battery pack mount T o DC OUT terminal T o AC outlet AC Power Adapter/ Charger DC cord A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction.
8 EN PAUSE Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust so that your thumb and fingers can easily operate the ST ART/STOP Button and Power Zoom Lever .
EN 9 4 FA D W W R O F F F E I I A F A A A R P P N F D D D / E E D E E E W – – O R R R I S S M – – – P C H W B B E R U H L . O T I A W L T T C L E E K R 1 O D T C R N A I L D E T M O A I T S E E C D S U C / K J P R R T C . L N E I O A E M D Y N E E ME N 1 U .
10 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide down and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automati- cally .
EN 11 1 R S Z S G B I D R E O O N A E D E E C U O A I E M C T N M P N P N O A U M D / U . M R O M U T M E N D M O P A B M R E O D L E O A D E L R D E Y E ME S L N P P U Recording Mode Setting Set the tape recording mode depending on your preference.
12 EN GETTING ST ARTED (cont.) MultiMediaCard Clipped edge Card Cover Loading A MultiMediaCard 1 Make sure the camcorder ’ s power is off. 2 Open the card cover . 3 Insert the MultiMediaCard clipped edge first. • Do not touch the terminal on the reverse side of the label.
EN 13 XGA FI N E Picture Quality/Size Mode Setting Picture quality and size can be selected to best match your needs. Four different modes are available: XGA (1024 x 768 pixels) FINE, XGA STD, VGA (640 x 480 pixels) FINE and VGA STD, listed in order of quality .
14 EN GETTING ST ARTED (cont.) F. A U T O Operation Mode Choose the appropriate opration mode according to your preference using the POWER Switch, Operation Switch and MODE Dial. When the Operation Switch is set to “ ”, “F . AUTO” appears. When set to “ ”, there is no indication.
EN 15 DUA L P S V I D E O D U A L D S C MODE MODE Dial F unction • Allows you to record video on a tape and store still images in a MultiMediaCard simultaneously ( pg. 24). • File size of still images: 640 x 480 pixels • V ideo quality is the same as in the VIDEO mode.
16 EN 180 ° 90 ° 25 90 min 89 min 3 min 2 min 1 min 0 min min BR I G H T RECORDING Basic Recording For Video POWER Lamp T ally lamp (lights while recording is in progress) MODE Dial ST ART/STOP Button T ape remaining time indicator (Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display T o Adjust The Brightness Of The Display .
EN 17 Self-Recording JOURNALISTIC SHOOTING In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270 ° (90 ° downward, 180 ° upward).
18 EN FULL Snapshot mode with no frame* PIN-UP Pin-Up mode 1 R S Z S G B I D R E O O N A E D E E C U O A I E M C T N M P N P N O A U M D / U . M R O M U T M E N D M O P A B M R E O D L E O A D E L R D E Y E ME F P N U I U L N L – UP RECORDING Basic Recording For Video (cont.
EN 19 XGA FI N E 10 / 24 RECORDING Basic Recording For Digital Still Camera (D.S.C.) Basic Shooting (Snapshot) Y ou can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: Y ou should already have performed the procedures listed below .
20 EN 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T RECORDING Basic Recording For Video And D.S.C. Zoom in (T : T elephoto) Zoom out (W: W ide angle) Power Zoom Lever Zoom display FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification.
EN 21 NOTE: Recording From The Middle Of A T ape Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
22 EN Progressive Mode Recording This mode lets you record moving images (successive jitter -free still images) onto a tape. Images can then played back jitter -free, with superior quality . High-resolution still images can also be processed on a personal computer or can be printed out ( pg.
EN 23 Description of Progressive Scan CCD Progressive Scan is a special image sensing method which, unlike conventional interlace scanning, is able to pick up all the lines of picture information in one Scan.
24 EN F O C U S B A C K L I G H T E X P O S U R E RECORDING Advanced Features For Video And D.S.C. (cont.) Dual Shooting Lets you record images on a tape and store still images in a MultiMediaCard simultaneously . In other words, it is possible to store still images in the MultiMediaCard without interrupting image recording on the tape.
EN 25 FO CUS FOC US While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity .
26 EN 1 D S 5 T W W F F R I E S E I I L L E S L L D N A A M T F E E D S S A U – H H N R T M M C U N I A O U A A M C D T D L E R E J R O . ME O O N F N U F 4 FA D W W R O F F F E I I A F A A A R P P N F D D D / E E D E E E W – – O R R R I S S M – – – P C H W B B E R U H L .
EN 27 Menu Screen Explanations : Factory-preset CONTINUED ON NEXT P AGE CAMERA MENU F ADER/WIPE P .AE/EFFECT W .BALANCE REC MODE SOUND MODE ZOOM GAIN UP BEEP/ T ALL Y SNAP MODE ID NUMBER 12 BIT 16 BIT 10X 40X 200X NOTE: The “ CAMERA MENU ” settings are effective when the Operation Switch is set to both “ ” and “ ” .
28 EN Menu Screen Explanations (cont.) RECORDING Advanced Features For Video And D.S.C. (cont.) DIS SELF- TIMER 5S TELE MA CRO WIDE MODE DEMO. MODE CAMERA MENU Demonstrates certain functions such as Programme AE with special effects, etc., and can be used to confirm how these functions operate.
EN 29 NOTES: ● The “ MANUAL MENU ” settings are effective only when the Operation Switch is set to “ ” . ● “ DISPLA Y MENU ” functions which are set when the POWER Switch is set to “ ” are also applied when the POWER Switch is set to “ ” ( pg.
30 EN 1 D S 5 T W W F F R I E S E I I L L E S L L D N A A M T F E E D S S A U – H H N R T M M C U N I A O U A A M C D T D L E R E J R O . ME A A O O N U U N F U T T F O O RECORDING Advanced Features For Video And D.S.C. (cont.) Snapshot Flash The flash can be used when a snapshot is taken in Record- Standby ( pg.
EN 31 1 D S 5 T W W F F R I E S E I I L L E S L L D N A A M T F E E D S S A U – H H N R T M M C U N I A O U A A M C D T D L E R E J R O . ME N 2 U Flash Brightness Adjustment When a snapshot ( pg. 18, 19) is taken in the dark the camcorder fires the flash ( pg.
32 EN 1 D S 5 T W W F F R I E S E I I L L E S L L D N A A M T F E E D S S A U – H H N R T M M C U N I A O U A A M C D T D L E R E J R O . ME O O N F N U F Self-Timer Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way , adding the final touch to a memorable picture.
EN 33 1 D S 5 T W W F F R I E S E I I L L E S L L D N A A M T F E E D S S A U – H H N R T M M C U N I A O U A A M C D T D L E R E J R O . ME O 5 A N F S N U F IM . 5-Second Recording Record a vacation or an important event in 5-second clips to keep the action moving.
34 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene.
EN 35 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.
36 EN 1/50 1/100 1/250 1/50 1/100 1/250 4 P 1 2 . S S V S S S A L L I O H H H E O O D F U U U / W W E F T T T E O T T T F E E E F 1 2 E R R R E C C H T O RECORDING Advanced Features For Video And D.
EN 37 F S FS FF 001 002 003 005 004 EXIT 100-DVC00001 006 SOUND Digital Sound Effects SOUND EFFECT MODE SELECTION 1 Load a multimedia card on which you have stored some sound effects ( 墌 pg.
38 EN RECORDING Advanced Features For Video And D.S.C. (cont.) Exposure Control Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing.
EN 39 White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically .
40 EN F O C U S B A C K L I G H T E X P O S U R E PLA YBACK Basic Playback For Video Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) 1 Load a tape ( 墌 pg. 10). 2 Set the POWER Switch to “ ” while pressing down the Lock Button located on the switch.
EN 41 1 S 1 S R B A R O 2 Y E L V E U B N C A / V T N I C N S I U D T H M K – D R R O C V E N M M O D S O I O O O E R P D D D C Y E M E E H O EN S S S U T O O E U U R N N E D D O L R 1 O D T R N A I.
42 EN 12 BI T /S O U N D 1 SP 4 25. 1 1 2 7 . : 0 3 0 0 TC 12 : 34 : 24 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
EN 43 1 S 1 S R B A R O 2 Y E L V E U B N C A / V T N I C N S I U D T H M K – D R R O C V E N M M O D S O I O O O E R P D D D C Y E M E E H O EN S S S C E U T O O A X E U U N E R N N C C E D D E U O.
44 EN E - M R A E I C L OR C D L I I N P G E - M R C A E O I C M L O P R L C D E L I T I N E P G D E - M R A E I C L OR C D L I I N P G After approx. 20 seconds or when ST ART/STOP is pressed POWER Switch Playback Screen ST ART/STOP Button PLA YBACK Advanced Features For Video (cont.
EN 45 IM 1 A 3 G / E 24 100 – 0013 IM 1 A 0 G / E 24 100 – 0010 IM 1 A 1 G / E 24 100 – 0011 IM 1 A 2 G / E 24 100 – 0012 F O C U S B A C K L I G H T E X P O S U R E POWER Switch Normal Playback Images shot with the camcorder are automatically numbered, then stored in numerical order in the MultiMediaCard.
46 EN 001 F 002 S 003 S 005 F 004 F EXIT 1 00-DVC00003 VGA 006 F IMAGE Index number Selected file Picture Quality/Size mode: Appears only when displaying still images Protect icon POWER Switch Index Screen The files you stored can be displayed together with their index information.
EN 47 F S FS FF 001 002 003 005 004 EXIT 100-DVC00001 VGA 006 IMAGE F S FS FF 001 002 003 005 004 EXIT 100-DVC00001 006 E-CLIP F S FS FF 001 002 003 005 004 EXIT 100-DVC00001 006 SOUND Playback Screen Index Playback Y ou can view or listen to the files (still images, video clips, or sound effects) stored in memory six at a time.
48 EN 1 I I S S E E F D F R M M O O – – R P O E A A U U C C A O R M T G G N N L L M F M E U E E D D I I E A M R P P T O N P D P D D R R E R E P D E Y O L O L R E L .
EN 49 001 F 002 S 003 S 005 F 004 F 006 F DELETE EXIT C E A X N E M C C E E U M L T O E RY M ENU Deleting Files Previously stored files can be deleted either one at a time or all at once. 1 Set the POWER Switch to “ MEMORY PLA Y ” while pressing down the Lock Button located on the switch.
50 EN PLA YBACK Advanced Features For D.S.C. (cont.) 1 I I S S E E F D F R M M O O – – R P O E A A U U C C A O R M T G G N N L L M F M E U E E D D I I E A M R P P T O N P D P D D R R E R E P D E Y O L O L R E L .
EN 51 EXIT 001 002 003 005 004 006 EXIT FRAME 5 FRAME Superimposing A Snap Frame A selection of snap frames are stored in the camcorder . A frame can be superimposed over a still image. 1 Play back an image stored in the MultiMediaCard. 2 Press SNAP FRAME .
52 EN 013 F 014 F 015 F 017 F 016 F 018 F DELETE EXIT C E A X N E M C C E E U M L T O E RY M ENU Snap Frame Deletion A snap frame created on a PC can be transferred to a MultiMediaCard using the provided software. Snap frames that have been transferred to a MultiMediaCard can be deleted when they are no longer needed.
EN 53 1 I I S S E E F D F R M M O O – – R P O E A A U U C C A O R M T G G N N L L M F M E U E E D D I I E A M R P P T O N P D P D D R R E R E P D E Y O L O L R E L . . . . O L . M . . EN C A S U A L E N L L C E E C L T C E A X N E M C C E E U M L T O E RY M ENU TO DELETE ALL SNAP FRAMES 1 Perform steps 1 through 4 on pag.
54 EN 1 I I S S E E F D F R M M O O – – R P O E A A U U C C A O R M T G G N N L L M F M E U E E D D I I E A M R P P T O N P D P D D R R E R E P D E Y O L O L R E L .
EN 55 019 00 00 00 00 03 00 020 021 023 022 EXIT 100-DVC00021 VGA 024 DPOF C E A X N E M C C E E U M L T O E RY M ENU TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS 1 Perform steps 1 through 4 on pg. 54. 2 Rotate the MENU wheel to selsect “SELECT” and press it.
56 EN CONNECTIONS Basic Connections 1 2 These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with a SCART connector compatible only with regular video signal B.
EN 57 NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( 墌 pg. 7). ● When connecting the cables, make sure to connect the ends with a core filter to the camcorder . The core filter reduces interference.
58 EN CONNECTIONS Advanced Connections Connection T o A Personal Computer This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector -equipped capture board installed.
EN 59 Connection T o A Personal Computer NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( 墌 pg. 7). ● Never connect the PC connection cable and the DV cable simultaneously to the camcorder .
60 EN DUBBING Dubbing T o A VCR [T o use this camcorder as a player] 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg.
EN 61 VCR TV * Connect when an S-V ideo cable is not used. POWER Switch To S S-Video cable (optional) Red to AUDIO R Y ellow to VIDEO* White to AUDIO L Audio/Video cable [RCA plug to RCA plug] (option.
62 EN PLAY ( 4 ) STOP ( 5 ) Dubbing T o A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
EN 63 DV cable (optional) V ideo unit equipped with DV connector T o DV OUT T o DV IN/OUT POWER Switch Core filter Core filter Lock Button Open the connector cover .
64 EN T P O US C H OP " Y SN T A O PS T H A O P T E " POWER Switch Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Dubbing Images Stored In A MultiMediaCard T o A T ape Images can be dubbed from a MultiMediaCard to a tape. 1 Load a MultiMediaCard ( 墌 pg.
EN 65 SP 6 1 S 1 S R B A R O 2 Y E L V E U B N C A / V T N I C N S I U D T H M K – D R R O V E N M M O D S C I O O O E R O D D D C P E M E E H Y O EN O O U F N F Play/Pause Button ( 4 / 6 ) Display POWER Switch SNAPSHOT Button Dubbing Images Recorded On A T ape T o A MultiMediaCard Images can be dubbed from a tape to a MultiMediaCard.
66 EN 30 ° 30 ° 5m 1 3 2 + – + – The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.
EN 67 10 ) @ $ ! # % ^ & * ( 2 3 4 6 8 5 7 9 Buttons 1 Infrared beam transmitting window 2 Zoom (T/W) Buttons 3 DISPLA Y Button 4 SHIFT Button 5 SLOW Rewind/Forward Buttons Left/Right Buttons 6 RE.
68 EN USING THE REMOTE CONTROL UNIT (cont.) Press T Normal playback Left or SLOW Rewind Button T o move image, press (Right) while keeping SHIFT held down.
EN 69 P 4 L O A F 1 2 3 4 5 Y F BACK C M S S V L O E T I E A N P R D F S O I O E F S T A B O E I O E C C N E T E C F H I O LM PLAY EFFECT EFFECT ON/OFF PLA YBACK EFFECT Select Menu Remote sensor FEA TURE: Playback Special Effects PURPOSE: T o allow you to add creative effects to the video playback image.
70 EN VCR CODE LIST 6 2 6 4 7 7 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 GRUNDIG 1 4 3 4 HITACHI 6 6 6 3 PANASONIC 1 3 1 7 1 1 9 4 1 8 JVC 9 1 9 6 9 3 BLAUPUNKT AKAI 9 7 9.
EN 71 DISPLA Y MAKE CONNECTIONS Also refer to pg. 56 and 57. 1 A THOMSON VCR equipped with a remote pause connector . . . ... connect the editing cable to the Remote P AUSE connector . A THOMSON VCR not equipped with a remote pause connector but equipped with an R.
72 EN 1 2 3 4 5 6 7 8 — — T T I O M T — E A I — L N : C — O — D ~ ~ ~ ~ ~ ~ ~ ~ E O — 0 U — 0 T : : — 0 — 0 M OD E PLA Y CANCEL R.A.EDIT ON/OFF FADE/WIPE EFFECT EDIT IN/OUT SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor .
EN 73 1 2 3 4 5 6 7 8 — — — — T T I O M T 0 0 0 0 1 — E A I 0 7 3 9 5 — L N : : : : : : C 2 1 3 3 5 — O 5 8 3 0 5 — D ~ ~ ~ ~ ~ ~ ~ ~ E O 0 0 0 1 1 1 U 2 8 5 3 6 6 9 T : : : : : : : 0 3 5 1 2 3 3 5 1 3 5 0 0 9 M — — O — — DE — — — — — — P AUSE VCR REC STBY REW STOP CANCEL R.
74 EN 1 2 3 4 5 6 7 8 — — T T I O M T — E A I — L N : C — O — D ~ ~ ~ ~ ~ ~ ~ ~ E O — 0 U — 0 T : : — 0 — 0 M OD E R.A.EDIT ON/OFF USING THE REMOTE CONTROL UNIT (cont.) For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others.
EN 75 1 S 1 S R B A R O 2 Y E L V E U B N C A / V T N I C N S I U D T H M K – D R R O C V E N M M O D S O I O O O E R P D D D C Y E M E E H O EN + U 1 . 0 ADJUSTMENT OF VCR/CAMCORDER TIMING 4 Point the remote control at the camcorder ’ s remote sensor and press R.
76 EN 6e P AUSE PLA Y DISPLA Y A.DUB STOP USING THE REMOTE CONTROL UNIT (cont.) Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( pg. 27). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16- bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
EN 77 EXPLO S I O N 6e P AUSE PLA Y STOP EDIT IN/OUT Audio Dub Standby mode Display Audio Dubbing Using Digital Sound Effects 1 Load the provided MultiMediaCard ( pg. 12) and perform step 1 and 2 of page 76. 2 Press EDIT IN / OUT so that “ ” appears.
78 EN 1 2 1 2 3 USER MAINTENANCE OPEN/EJECT Switch PUSH HERE Cassette holder Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
EN 79 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “ SET DA TE/TIME! ” appears. 3. Recording cannot be performed. 4. There is no picture. 5. Some functions are not available using the MENU wheel. 6. The focus does not adjust automatically .
80 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 11. The colour of Snapshot looks strange. 12. Although Snapshot is attempted, flash does not take place. 13. Although a Snapshot is taken with the flash, Red-Eye Reduction does not take place.
EN 81 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 17. Programme AE with special effects and Fade/Wipe Effects do not work. 18. The Black & White Fader does not work. 19. The Dissolve function does not work. 20. The Picture Wipe and Dissolve functions do not work.
82 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 24. Even when Slow Shutter is not selected, the image looks like it is activated. 25. There is no strobe when the Classic Film or Strobe mode is activated. 26. White Balance cannot be activated.
EN 83 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 35. • Certain Fade/W ipe effects, certain modes of Programme AE with special effects, “ DIS ” and other functions that cannot be used together are selected at the same time. 36. • The LCD monitor and the viewfinder are made with high-precision technology .
84 EN SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 45. The LCD monitor , the viewfinder and the lens have become dirty (ex. fingerprints). 46. An unusual mark appears. 47. An error indication (E01 — E06) appears. 48. The charger indicator on the AC Power Adapter/Char ger does not light.
EN 85 INDEX Docking Station 1 PC Connector [DIGIT AL STILL] ............ pg. 58 2 J T erminal/Edit Connector [JLIP (Joint Level Interface Protocol) (EDIT)] ................................................ pg. 71 • Connect to a JLIP-compatible camcorder or VCR to control it from the computer using the provided Software.
86 EN INDEX Controls, Connectors And Indicators O F O C U S B A C K L I G H T E X P O S U R E 2 3 4 5 6 7 o u i & ( * ) @ ! 9 8 0 # ^ % $ t Y U R E W e w QT p d s r P a y I q VMD22 EN(66/100) 29/0.
EN 87 Controls 1 Not applicable 2 PRINT FRAME Button .......................... pg. 51 3 E-MAIL CLIP REC Button ...................... pg. 44 4 ST AR T/STOP Button ............................. pg. 16 5 • Power Zoom Lever [T/W] .........
88 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Displays the selected Fade/W ipe effect. ( pg. 34, 35) 2 Appears when in the Squeeze, Cinema or PS Wide mode. ( pg. 28) 3 * Displays the recording mode (SP or LP).
EN 89 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording F P . S 2 A 4 U 0 P T x 3 H B O O R W T I E O G X H P T L T OS I O N 1. 1 1 2 . : 0 0 0 0 1 * 2 3 4 6 8 5 7 9 # % ^ $ * & 0 ! @ 1 * Appears when the Operation switch is set to “ ” .
90 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. ( pg. 41, 42) 2 Displays the selected Digital Sound Effect. ( pg. 37) 3 Displays the tape speed. ( pg. 1 1) 4 Appears while a tape is running.
EN 91 Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically .
92 EN Indications Function ● Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder . ● Appears in the following cases when dubbing from a tape to a MultiMediaCard (as digital stills or video clips): – when no MultiMediaCard is loaded.
EN 93 General Batter y Precautions If the remote control is not functioning even if it is being operated correctly , the batteries are ex- hausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for battery use.
94 EN CAUTIONS (cont.) Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . .... make sure the cassette bears the Mini DV mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 95 Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local THOMSON dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from function- ing properly .
96 EN TERMS F Fade-In/Out ........................................ pg. 34, 35 Fast-Forward The T ape .............................. pg. 40 5-second recording mode ......................... pg. 33 Flas h ....................................
EN 97 P Picture Quality/Size Mode ........................ pg. 13 Picture W ipe/Dissolve ......................... pg. 34, 35 Playback Special Effects ............................ pg. 69 Playback Zoom ......................................
98 EN SPECIFICA TIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Charger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx.
EN 99 For Connectors V ideo output :1 V ( p-p ) , 75 Ω , analogue Audio output : 300 mV (rms), 1 k Ω , analogue, stereo DV Input/output : 4-pin, IEEE 1394 compliant Headphone output : ø 3.5 mm, stereo AC Power Adapter/Charger AC 2200 Power requirement : AC 1 10 V to 240 V ` , 50 Hz/60 Hz Power consumption : 23 W Output Charge : DC 7.
100 EN NOTES VMD22 EN(66/100) 29/08/00, 15:48 100.
THOMSON MUL TIMEDIA 46 quai A. Le Gallo 92648 Boulogne Cedex France RCS NANTERRE B 322 019 464 http://www .thomson-multimedia.com 35126140 L YT0662-001A © Copyright THOMSON multimedia 2000 DAE Commun.
An important point after buying a device THOMSON VMD 22 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought THOMSON VMD 22 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data THOMSON VMD 22 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, THOMSON VMD 22 you will learn all the available features of the product, as well as information on its operation. The information that you get THOMSON VMD 22 will certainly help you make a decision on the purchase.
If you already are a holder of THOMSON VMD 22, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime THOMSON VMD 22.
However, one of the most important roles played by the user manual is to help in solving problems with THOMSON VMD 22. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device THOMSON VMD 22 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
