Instruction/ maintenance manual of the product EPW Thomas & Betts
Go to page of 3
Electr ic , W ater Circulation Heater Installation/Operation/Maintenance Form MI511 Applies to Heater Model EPW 1.0 INITIAL INSPECTION 1.1 Upon receipt from the carrier , inspect the heater for possib le damage in tr ansit. If necessar y , immediately repor t damage to shipping company .
2.7.5 Optional e xpansion tank (f or closed loop systems) is mounted in the outlet piping. 2.7.6 A 1 1/2" NPT drain plug is fitted at the bottom of the heater . W e recommend use of a dr ain v alve to simplify clean-out of sludge which ma y accumulate in the v essel.
3.6 The built-in temperature high limit is f actory set at 180 ° F (82 ° C). This control works best when it is set about 40 ° F (22 ° C) abov e the water outlet temper ature . T o adjust the limit control setting remov e the small panel on the limit control to access the adjustment screw .
An important point after buying a device Thomas & Betts EPW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Thomas & Betts EPW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Thomas & Betts EPW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Thomas & Betts EPW you will learn all the available features of the product, as well as information on its operation. The information that you get Thomas & Betts EPW will certainly help you make a decision on the purchase.
If you already are a holder of Thomas & Betts EPW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Thomas & Betts EPW.
However, one of the most important roles played by the user manual is to help in solving problems with Thomas & Betts EPW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Thomas & Betts EPW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
