Instruction/ maintenance manual of the product SB2B Thermador
Go to page of 19
Installation Instructions and Owner's Man ual for Thermador Outdoor Cooktop Model SB2B WARNING: If the information in this manual is not f ollow ed exactly , a fire or explosion ma y result causing pr operty damage , personal injur y or death.
A Special Messa g e to Our Customers Thank you for selecting the Thermador® Outdoor Cooktop. We recom- mend that you take time to read this entire booklet before using your new appliance for the first time. This booklet contains important safety information, installation instructions, operation and care suggestions.
Contents SECTION 1: Safety Information ............................................................. 2-4 SECTION 2: Gas Requirements ................................................................... 5 Natural Gas Requirements .......................
TESTED IN ACCORDANCE WITH ANSI Z21.58 – 1995, ANSI Z21.58a – 1998 STANDARD FOR OUTDOOR COOKING GAS APPLIANCES, AND CAN/CGA 1.6 – M95, CGA 1.6a – M98, STANDARD FOR OUTDOOR COOKING GAS APPLIANCES. This unit is for outdoor use onl y in a w ell-v entilated area.
IMPORTANT INFORMATION This outdoor gas cooking appliance is not intended to be installed in or on recreational vehicles and/or boats. Always inspect the natural gas or LP gas hose assembly before each use of the appliance.
SECTION 1: SAFETY PRA CTICES T O A V OID PERSONAL INJUR Y LP TANK REQUIREMENTS This model can be converted for use with an LP cylinder which can be purchased locally from an LP supplier or other retail outlet. The cylinder must be constructed and marked in accordance with the specifications for LP-gas cylinders of the U.
NA TURAL GAS REQUIREMENTS - Inlet Connection: 1/2" NPT Supply Pressure: 6" to 14" W.C. Manifold Pressure: 5" W.C. PROP ANE GAS REQUIREMENTS - Inlet Connection: 1/2" NPT Supply Pressure: 11" to 14" W.C. Manifold Pressure: 10" W.
SECTION 3: SITE PREP ARA TION BUILT-IN INSTALLATIONS Determine a suitable location for the cooktop by taking into account exposure to wind and availability of gas and electrical supplies. Insure that the gas supply line and electrical supply are located in close proximity to the unit.
SECTION 4: ELECTRICAL REQUIREMENTS AND GROUNDING INSTR UCTIONS Cooktop Three-Prong Plug and Receptacle Figure 2 AVERTISSEMENT Instruction pour la mise a la terre electrique Cet appareil est muni d’u.
SECTION 5: UNP A CKING AND PLA CING THE UNIT LOCA TING Y OUR OUTDOOR COOKT OP Unpack and remove all accessory items, packing materials and product literature from the unit. Attach the gas pressure regulator to the end of the manifold as shown in Figure 3.
6. The cooktop is supplied with a pressure regulator that is packed with the unit. The regulator is set for natural gas. For use with propane, it must be converted.
7. If the cooktop will be used with an LP cylinder, follow these steps: A . The Model LPHose is available at your Thermador dealer. B. This assembly can also be purchased locally providing it meets the following specifications: Hose length to be 24".
GAS AND ELECTRICAL HOOK-UP With the unit inside of the enclosure, connect the gas supply hose to the manual shut-off valve and open valve. Check the connection points at the shut-off valve for any leaks and repair prior to installation of the unit. See Figures 11 and 12.
SECTION 6: TEST AND ADJUSTMENT BURNER AIR ADJUSTMENT All burners are adjusted for proper flame characteristics at time of assembly. All burners should exhibit flames which are blue and stable, with no yellow-tipping, lifting or excessive noise when operating on either natural or LP gases.
SECTION 7: USING YOUR OUTDOOR COOKT OP GENERAL BURNER INFORMA TION • Each burner is rated at 15,000 BTU on High. • Choose a pan base to fit the flame size. The flame should never extend beyond the base of the pan. • Never turn on a burner without removing the cover.
SECTION 8: CARE AND CLEANING The quality of this material resists most stains and pitting, providing the surface is kept clean and protected with a stainless steel polish.
__________________________________ Model Number __________________________________ Serial Number __________________________________ Date of Purchase __________________________________ Dealer’s Name .
Full One-Y ear W arranty Covers one year from the date of installation or date of occupancy for a new previously unoccupied dwelling. Save your dated receipt or other evidence of the installation/occupancy date. Thermador ® Will Pay For: All repair labor and replacement parts found to be defective due to materials and workmanship.
5551 McFadden Avenue, Huntington Beach, CA 92649 • 800/735-4328 ECO14028 • 08-04-638B • © BSH Home Appliances Corp. • Litho U. S. A. 4/00 Specifications are f or planning purposes only . Refer to installation instructions and consult your countertop supplier prior t o making counter opening.
An important point after buying a device Thermador SB2B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Thermador SB2B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Thermador SB2B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Thermador SB2B you will learn all the available features of the product, as well as information on its operation. The information that you get Thermador SB2B will certainly help you make a decision on the purchase.
If you already are a holder of Thermador SB2B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Thermador SB2B.
However, one of the most important roles played by the user manual is to help in solving problems with Thermador SB2B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Thermador SB2B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
