Instruction/ maintenance manual of the product TPA102 MSOP Texas Instruments
Go to page of 26
May 2001 Mixed-Signal Products User ’ s Guide SLOU022A.
IMPORT ANT NOTICE T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify , before placing orders, that information being relied on is current and complete.
iii Read This First Preface How to Use This Manual This document contains the following chapters: Chapter 1 — Introduction Chapter 2 — Quick Start Chapter 3 — Details Related Documentation From .
Running Title — Attribute Reference iv FCC Warning This equipment is intended for use in a laboratory test environment only . It generates, uses, and can radiate radio frequency energy and has not b.
Running Title — Attribute Reference v Chapter Title — Attribute Reference Contents 1 Introduction 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Features 1-2 .
Running Title — Attribute Reference vi Figures 1 – 1 The TI TP A102 MSOP Audio Amplifier Evaluation Module 1-4 . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 1 Quick Start Platform Map 2-2 . . . . . . . . . . . . . . . . . . . . . . . .
1-1 Introduction Introduction This chapter provides an overview of the T exas Instruments (TI) TP A102 MSOP audio amplifier evaluation module (SLOP125). It includes a list of EVM features, a brief illustrated description of the module, and a list of EVM specifications.
Features 1-2 Introduction 1.1 Features The TI TP A102 MSOP audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features: TP A102 MSOP stereo audio power amplifier evaluation module Dual channel, single-ended operation 150 mW output power into 8 Ω at 5 V 2.
Description 1-3 Introduction 1.2 Description The TP A102 MSOP audio power amplifier evaluation module is a complete, low-power stereo audio power amplifier for high-fidelity line-level output, headphone, and small speaker applications.
1-4 Introduction.
2-1 Quick Start Quick Start The steps in this chapter can be followed to quickly prepare the TP A102 MSOP audio amplifier EVM for use. Using the TP A102 MSOP EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power , signal and control inputs, and signal outputs to the EVM using standard connectors.
Precautions 2-2 Quick Start 2.1 Precautions Power Supply Input Polarity and Maximum V oltage Always ensure that the polarity and voltage of the external power connected to V CC power input connector J1, J2, and/or V DD power input connector J6 are correct.
Quick Start List for Platform 2-3 Quick Start 2.2 Quick Start List for Platform Follow these steps when using the TP A102 MSOP EVM with the TI Plug-N-Play audio amplifier evaluation platform (see the platform user ’ s guide, SLOU01 1, for additional details).
Quick Start List for Stand-Alone 2-4 Quick Start 2.3 Quick Start List for Stand-Alone Follow these steps to use the TP A102 MSOP EVM stand-alone or when connecting it into existing circuits or equipment.
3-1 Details Details This chapter provides details on the TP A102 IC, the evaluation module, the steps in the Quick-Start List, additional application information, and a parts list for the TP A102 MSOP evaluation module. T opic Page 3.1 Precautions 3 – 2 .
Precautions 3-2 Details 3.1 Precautions Power Supply Input Polarity and Maximum V oltage Always ensure that the polarity and voltage of the external power connected to V CC power input connector J1, J2, and/or V DD power input connector J6 are correct.
The TP A102 MSOP Audio Power Amplifier Evaluation Module 3-3 Details 3.2 The TP A102 MSOP Audio Power Amplifier Evaluation Module The TP A102 MSOP audio power amplifier evaluation module is powered by a TP A102 150-mW stereo audio amplifier IC.
The TP A102 MSOP Audio Power Amplifier Evaluation Module 3-4 Details 3.2.1 TP A102 Audio Amplifier IC The TP A102 audio amplifier IC is a CMOS device intended primarily for high-performance line-level output, headphone driver , and small speaker applications.
The TP A102 MSOP Audio Power Amplifier Evaluation Module 3-5 Details 3.2.2 Module Gain The TP A102 MSOP evaluation module has a set gain of 4 (inverting) for each channel. However , the gain can be adjusted to a maximum of approximately 10 (inverting) by changing the value of feedback resistors (R2 and R4, Figure 3 – 3).
Using the TP A102 MSOP EVM With the Plug-N-Play Evaluation Platform 3-6 Details 3.3 Using the TP A102 MSOP EVM W ith the Plug-N-Play Evaluation Platform The TP A102 MSOP audio amplifier evaluation module is designed for use with the TI plug-n-play audio amplifier evaluation platform.
Using the TP A102 MSOP EVM With the Plug-N-Play Evaluation Platform 3-7 Details 3.3.2 Signal Routing Signal flow on the platform is controlled by two signal routing switches, as shown in Figure 3 – 5.
Using the TP A102 MSOP EVM With the Plug-N-Play Evaluation Platform 3-8 Details 3.3.3 Shutdown The TP A102 MSOP EVM is equipped with a shutdown control input pin. When this input is tied to V DD , the TP A102 amplifier IC on the module ceases operation and enters an ultralow-power state.
Using the TP A102 MSOP EVM With the Plug-N-Play Evaluation Platform 3-9 Details 3.3.4 Power Requirements The TP A102 MSOP audio power amplifier evaluation module can operate from a V DD voltage between approximately 2.
Using the TP A102 MSOP EVM With the Plug-N-Play Evaluation Platform 3-10 Details 3.3.5 Inputs and Outputs The TI plug-n-play audio amplifier evaluation platform is equipped with several standard conectors for audio inputs and outputs.
Using the TP A102 MSOP EVM Stand-Alone 3-1 1 Details 3.4 Using the TP A102 MSOP EVM Stand-Alone Using the TP A102 MSOP audio power amplifier evaluation module stand-alone is much the same as using it with the platform. The same 2.5-V to 5.5-V power supply requirement exists.
TP A102 MSOP Audio Power Amplifier Evaluation Module Parts List 3-12 Details 3.5 TP A102 MSOP Audio Power Amplifier Evaluation Module Parts List T able 3 – 1.
An important point after buying a device Texas Instruments TPA102 MSOP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Texas Instruments TPA102 MSOP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Texas Instruments TPA102 MSOP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Texas Instruments TPA102 MSOP you will learn all the available features of the product, as well as information on its operation. The information that you get Texas Instruments TPA102 MSOP will certainly help you make a decision on the purchase.
If you already are a holder of Texas Instruments TPA102 MSOP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Texas Instruments TPA102 MSOP.
However, one of the most important roles played by the user manual is to help in solving problems with Texas Instruments TPA102 MSOP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Texas Instruments TPA102 MSOP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
