Instruction/ maintenance manual of the product SLOU020A Texas Instruments
Go to page of 28
2001 Mixed-Signal Products User ’ s Guide SLOU020A.
IMPORT ANT NOTICE T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify , before placing orders, that information being relied on is current and complete.
iii Chapter Title — Attribute Reference Preface Related Documentation From T exas Instruments TI Plug-N-Play Audio Amplifier Evaluation Platform (literature number SLOU01 1) provides detailed information on the evaluation platform and its use with TI audio evaluation modules.
iv.
Running Title — Attribute Reference v Chapter Title — Attribute Reference Contents 1 Introduction 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Feature Highlights 1-2 .
Running Title — Attribute Reference vi Figures 1 – 1 The TI TP A31 1 MSOP Audio Amplifier Evaluation Module 1-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 1 Quick Start Platform Map 2-2 . . . . . . . . . . . . . . . . . . . . . . . .
1-1 Introduction Introduction This chapter provides an overview of the T exas Instruments (TI ) TP A31 1 MSOP audio amplifier evaluation module (SLOP123). It includes a list of EVM features, a brief description of the module illustrated with a pictorial diagram, and a list of EVM specifications.
Feature Highlights 1-2 Introduction 1.1 Feature Highlights The TI TP A31 1 MSOP audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features: TP A31 1 Low-V oltage Audio Power Amplifier Evaluation Module Single channel, bridge-tied load (BTL) or single-ended operation 3.
Description 1-3 Introduction 1.2 Description The TP A31 1 MSOP audio power amplifier evaluation module is a complete, low-power single-channel audio power amplifier .
1-4 Introduction.
2-1 Quick Start Quick Start The steps in this chapter can be followed to quickly prepare the TP A31 1 MSOP audio amplifier EVM for use. Using the TP A31 1 MSOP EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power , signal and control inputs, and signal outputs to the EVM using standard connectors.
Precautions 2-2 Quick Start 2.1 Precautions Power Supply Input Polarity and Maximum V oltage Always ensure that the polarity and voltage of the external power connected to V CC power input connector J1, J2, and/or V DD power input connector J6 are correct.
Quick Start List for Platform 2-3 Quick Start 2.2 Quick Start List for Platform Follow these steps when using the TP A31 1 MSOP EVM with the TI plug-n-play audio amplifier evaluation platform (see the platform user ’ s guide, SLOU01 1, for additional details).
Quick Start List for Stand-Alone 2-4 Quick Start 2.3 Quick Start List for Stand-Alone Follow these steps to use the TP A31 1 MSOP EVM stand-alone or when connecting it into existing circuits or equipment.
3-1 Details Details This chapter provides details on the TP A31 1 IC, the evaluation module, and the steps in the Quick-Start List, additional application information, and a parts list for the TP A31 1 MSOP evaluation module. T opic Page 3.1 Precautions 3 – 2 .
Precautions 3-2 Details 3.1 Precautions Power Supply Input Polarity and Maximum V oltage Always ensure that the polarity and voltage of the external power connected to V CC power input connector J1, J2, and/or V DD power input connector J6 are correct.
The TP A31 1 MSOP Audio Power Amplifier Evaluation Module 3-3 Details 3.2 The TP A31 1 MSOP Audio Power Amplifier Evaluation Module The TP A31 1 MSOP audio power amplifier evaluation module is powered.
The TP A31 1 MSOP Audio Power Amplifier Evaluation Module 3-4 Details 3.2.1 TP A31 1 Audio Amplifier IC The TP A31 1 audio amplifier IC is a CMOS device intended primarily for bridge- tied load (BTL) operation in battery-powered applications.
The TP A31 1 MSOP Audio Power Amplifier Evaluation Module 3-5 Details 3.2.3 SIngle-Ended Operation For single-ended operation, the module SE/BTL control input pin must be held high. The speaker (or headphone) load is connected to the module OUT+ output pin through a coupling capacitor , and to platform/system ground.
Using The TP A31 1 MSOP EVM With the Plug-N-Play Evaluation Platform 3-6 Details 3.3 Using The TP A31 1 MSOP EVM With the Plug-N-Play Evaluation Platform The TP A31 1 MSOP audio amplifier evaluation module was designed to be used with the TI plug-n-play audio amplifier evaluation platform.
Using The TP A31 1 MSOP EVM With the Plug-N-Play Evaluation Platform 3-7 Details 3.3.2 Signal Routing Signal flow on the platform is controlled by two signal routing switches, as shown in Figure 3 – 5.
Using The TP A31 1 MSOP EVM With the Plug-N-Play Evaluation Platform 3-8 Details 3.3.3 Mute/Mode The TP A31 1 MSOP EVM is equipped with a mute (shutdown) control input pin. When this input is tied to V DD , the TP A31 1 amplifier IC on the module shuts down and assumes an ultralow-power mode.
Using The TP A31 1 MSOP EVM With the Plug-N-Play Evaluation Platform 3-9 Details 3.3.3.2 Mute/Mode Select (JP6) A 3-pin jumper header (JP6) on the platform, functioning as a SPDT switch, routes the control signal from the headphone jack to either the mute control input pin or the mode control input pin of the evaluation module.
Power Requirements 3-10 Details 3.3.4 Power Requirements The TP A31 1 MSOP audio power amplifier evaluation module can operate from any voltage between approximately 2.5 V and 5.5 V ; however , the TP A31 1 amplifier IC on the module is characterized for operation at 3.
Inputs and Outputs 3-1 1 Details 3.3.5 Inputs and Outputs The TI plug-n-play audio amplifier evaluation platform is equipped with several standard conectors for audio inputs and outputs.
Using The TP A31 1 MSOP EVM Stand-Alone 3-12 Details 3.4 Using The TP A31 1 MSOP EVM Stand-Alone Using the TP A31 1 MSOP audio power amplifier evaluation module stand-alone is much the same as using it with the platform. The same 2.5-V to 5.5-V power supply range and the isolated OUT+ and OUT – lines for BTL operation requirement exists.
Using The TP A31 1 MSOP EVM Stand-Alone 3-13 Details 3.4.2 TP A31 1 MSOP EVM Connected for Single-Ended Output Figure 3 – 9. TP A31 1 MSOP EVM Connected for Stereo Single-Ended Output 33 µ F – 10.
TP A31 1 MSOP Audio Power Amplifier Evaluation Module Parts List 3-14 Details 3.5 TP A31 1 MSOP Audio Power Amplifier Evaluation Module Parts List T able 3 – 1. TP A31 1 MSOP EVM Parts List Ref. Description Size EVM Qty . Manufacturer/ Part Number V endor Number C5 Capacitor , 10 µ F , 6.
An important point after buying a device Texas Instruments SLOU020A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Texas Instruments SLOU020A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Texas Instruments SLOU020A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Texas Instruments SLOU020A you will learn all the available features of the product, as well as information on its operation. The information that you get Texas Instruments SLOU020A will certainly help you make a decision on the purchase.
If you already are a holder of Texas Instruments SLOU020A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Texas Instruments SLOU020A.
However, one of the most important roles played by the user manual is to help in solving problems with Texas Instruments SLOU020A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Texas Instruments SLOU020A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
