Instruction/ maintenance manual of the product TV36 TERK Technologies
Go to page of 8
TV36 HD TV ANTENNA PRO Owner’ s Manual TERK is a regis tered trademark. The TERK logo is a trademark of the TERK T echnologies Corp. Limited W arranty TERK T echnologies Corp. (TERK) warrants this product against defects in materials or workmanship for one (1) year from the date of pur chase.
2 Saf ety Pr ecautions (continued) F ollow These Rules and Live: 1. Perform as much antenna assembly on the ground as possible. 2. W atch out for overhead power lines and be sure to select an antenna site well away fr om all overhead wires. Check the distanc e to the power lines befor e you start installing.
Antenna Assembl y TV36 4 Antenna Assembl y (continued) 1. Unfold the elements on the two refl ector booms until they lock into place. Make sure that they are straight and perpendicular to the boom. 2. Attach the two refl ector booms using the attached nut and bolt so that they are perpendicular to the smaller boom.
5 Antenna Assembl y (continued) 5. Find the large antenna section and remov e the nut and bolt. Slide the narrow boom into the larger section. T ap lightly with a rubber mallet on the end of the small boom aligning the bolt holes. (See figure 4.) Re-install the bolt and nut; be sur e to tighten it securel y .
7 Antenna Assembl y (continued) 8. Loosen the U-bolt nuts, slide the TV36 antenna over the mast and lightly tighten the mast clamp. (See figure 7.) NOTE: The top side of the antenna is the side with the black plastic pieces on top of the large boom. 9.
9 Wher e T o Install Y our Antenna Befor e attempting to install your antenna, decide on the best location to install your antenna for both safety and performanc e. T o determine a safe distance from wires, power lines and trees: 1. Measure the length of your antenna and multiply by 2.
11 T ypes of Support Structur es and Mounting (continued) 1. Insert the threaded end of the strap hook, (the one secured to the strap) through the end portion of the “Z” mount (hole A).
13 T ypes of Support Structur es and Mounting (continued) W all Mount Suggested height limitation: 10 feet above the rooftop. An outside wall of your home is also an easy and convenient mounting place, but the wall and fastener s that you use must be str ong enough to support the antenna in high winds.
An important point after buying a device TERK Technologies TV36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TERK Technologies TV36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TERK Technologies TV36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TERK Technologies TV36 you will learn all the available features of the product, as well as information on its operation. The information that you get TERK Technologies TV36 will certainly help you make a decision on the purchase.
If you already are a holder of TERK Technologies TV36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TERK Technologies TV36.
However, one of the most important roles played by the user manual is to help in solving problems with TERK Technologies TV36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TERK Technologies TV36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
