Instruction/ maintenance manual of the product PW24N Telex
Go to page of 9
Revision B Page 1 of 9 12/11/08 2.4GHZ WIRELESS SYSTEM FOR POLICE VIDEO RECORDING USER GUIDE.
Revision B Page 2 of 9 12/11/08 TABLE OF CONTENTS 1. Quick S et Up and Operation ................................ ....................... 3 2. Installation ................................ ................................ .................... 4 3. Guidelines For Best Performance .
Revision B Page 3 of 9 12/11/08 QUICK SET UP AND OPERATION Synching Up The Transmitter and Base The synch operation only needs to be performed t he first time a system is used, or a new bodypack is used with a base previously synched to another bodypack.
Revision B Page 4 of 9 12/11/08 EMG Panic Button (if wired for use in your vehicle) 1) The EMG or Panic Button can be programmed to do many things but may not be connected in your vehicle. Check with your technical department to understand what this button will control before you use it.
Revision B Page 5 of 9 12/11/08 2. Plug the 3.5mm stereo plug in to the audio input jack of the recording device. 3. If it is to be used, plug in the in - car microphone into the In - Car Mic jack in the side of the receiver base. 4. Turn on the transmitter and place it in the charging cradle with the beltclip facing out.
Revision B Page 6 of 9 12/11/08 4) Guidelines and recommendations for best performance. Compatibility The transmitter and receiver must synchronize to work toget her (see Synch pro cess on page 3) .
Revision B Page 7 of 9 12/11/08 5 ) Trouble Shooting Guide Problem Possible Causes Solutions No audio and no In - Use LED light on the receiver when transmitter is on and In - Use Receiver is not powered Mak e sure that the power supply is properly connected Transmitter and receiver not synchronized Turn on transmitter and place in recharge cradle.
Revision B Page 8 of 9 12/11/08 PR24 N RECEIVER BASE STATION Controls Video Trigger Active +12/GND Indicators IN- USE LED: GREEN CHARGE LED : CHARGING - > RED FULL CHARGED - > GREEN Connections In Car Mic 2 .
Revision B Page 9 of 9 12/11/08 Factory Service (North America) If factory service is required, ship the unit prepaid in its original carton to: Telex Audio Service c/o Telex Communications 8601 East Cornhusker Highway L incoln, NE 68507 - 9702 U.S.A.
An important point after buying a device Telex PW24N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex PW24N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex PW24N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex PW24N you will learn all the available features of the product, as well as information on its operation. The information that you get Telex PW24N will certainly help you make a decision on the purchase.
If you already are a holder of Telex PW24N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex PW24N.
However, one of the most important roles played by the user manual is to help in solving problems with Telex PW24N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex PW24N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
