Instruction/ maintenance manual of the product N/DYM SERIES Telex
Go to page of 13
WIRELESS MICROPHONE SYSTEM N/DYM SERIES WIRELESS USER GUIDE GEBRAUCHSANWEISUNG MODE D’EMPLOI INSTRUCCIONES DEL USUARIO DRAHT - LOSES MIKROFON- SYSTEM SYSTEME DE MICROPHONE SANS FIL SISTEMA DE MICRÓ.
ENGLISH 1. Quick System setup guide 2. System Description 3. Detailed system/component setup instructions 3.1 Receiver Setup & Operation 3.2 Handheld T ransmitter Setup 3.3 Beltpack Setup 4. Guidelines/Recommendations for best performance 5. T roubleshooting Guide 6.
ENGLISH 2. System Description The Electro-V oice N/DYM Wireless is a series of 10 channel frequency agile UHF wireless systems that combine EV’s legendary quality and reliability with high value. The N/DYM Series transmitters and receivers operate in the UHF frequency range on one of ten channels between 800 and 814 MHz.
ENGLISH 5. Channel change lock-out. Once the channel has been set on the receiver , the N/DYM system has the capability to deactivate or lock-out the channel change button. This is done by depressing the set button for 10 seconds or more. Lock-out is active when the decimal point illumi- nates in the lower right corner of the channel display .
ENGLISH 3.2 Handheld T ransmitter Setup 1. Insert battery . Slide open the hinged battery compartment cover by placing your thumb on the indents of the battery door (at the bottom of the transmitter) and gently pushing down (see Figure 3).
ENGLISH 3.3 Bodypack T ransmitter Setup 1. Insert battery . Open the hinged battery compartment by placing your thumb or finger on the indent labeled OPEN on the battery door and pushing down, see Figure 6. When inserting the battery , pay attention to the polari- ty (+/-) and insert the terminals into the battery compartment first.
ENGLISH Figure 6. 4 Guidelines/Recommendations for best performance Compatibility The receiver and transmitter must be set to the same channel to operate together .
ENGLISH Problem Possible Causes Solutions No audio & no lights Receiver is off Make sure that power supply is on receiver properly connected and providing power to the receiver . No audio & no Tx ON T ransmitter is off. T urn on transmitter power switch.
ENGLISH UHF Receivers: NRU and NRU-G Receivers Receiver T ype Synthesized PLL Frequency Range (RF) Between 800 - 814 MHz Number of Selectable Channels 10 Diversity T rue Diversity with Secure-Phase TM RF Sensitivity < .
ENGLISH CER TIFICA TIONS NRU , NRSCU , Cer tified to ETS 300 445, Conforms to European Union directives, eligib le to bear CE mar king. NHTU , NBPU , Cer tified to I-ETS 300 442 and ETS 300 445, Conforms to European Union directives , eligible to bear CE marking.
ENGLISH ENGLISH Factory Service If factory service is required, ship the unit prepaid in its original carton to: T elex EVI Audio GmbH Hirschberger Ring 45 D-94315 Straubing T elephone: +49 (0) 9421 706 0 Fax: +49 (0) 9421 706 350 Enclose a note describing the problem along with any other pertinent information.
ENGLISH Factory Service If factory service is required, ship the unit prepaid in its original carton to: EV Audio Service c/o T elex Communications 8601 E. Cornhusker Highway T el: 402/467-5321 Fax: 402/467-3279 Enclose a note describing the problem along with any other pertinent information.
R T elex Communications Inc., 12000 Portland Ave. South Burnsville, MN 55337, USA 800/328-3771, 952/884-4051, Fax: 952/884-0043 MANUAL - N/DYM Series Wireless © T elex Communications, Inc.
An important point after buying a device Telex N/DYM SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex N/DYM SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex N/DYM SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex N/DYM SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Telex N/DYM SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Telex N/DYM SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex N/DYM SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Telex N/DYM SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex N/DYM SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
