Instruction/ maintenance manual of the product CDR-1000 Telex
Go to page of 8
OPERATING INSTRUCTIONS SUPPLEMENT CDR-1000.
Section 1 Quick Setup See Section 1 of main RE-1 Operating Instructions Section 2 System Description The CDR-1000 Wireless Microphone system combines frequency agility and ease of use like no other. The RE-1 transmitters and receivers operate over a 24MHz bandwidth in the UHF portion of the spectrum.
Section 3 Detailed Component Descriptions CDR-1000 RECEIVER CONTROLS, CONNECTORS AND INDICATORS power R 1 1 2 2 Featuring RE-1 CDR-1000 R menu set menu set 4 3 4 3 4 1 2a 2b 2c 2d Figure 1 Front Panel CDR-1000 Receiver CDR-1000 DUAL RECEIVER PROGRAM 2 PROGRAM 1 MADE IN U.
Section 4 Detailed Description of Unique CDR-1000 Features Headphone Operation 1. With the transmitters and receivers setup and operating (see Sections 1 and 3 in the main RE-1 Operating Instructions), plug stereo headphones into the 1/4inch jack on the front panel.
Figure 4 Antenna Chain with APD4-B . RE-OneLink PC Software 1. Software to monitor and control the CDR-1000 receivers from a PC through the USB port is available at www.
Section 5 Trouble Shooting Guide Problem Possible Causes Solutions No (or low) Audio with good RF signal and Audio indicatiors on receiver display Receiver audio output cable is disconnected or connected to the wrong receiver. Repair, replace cable or connect cable to the correct receiver.
Section 7 Certification Section 8 Accessories ACCESSORIES AND PARTS for CDR-1000 CERTIFICATIONS ( Depending on frequency selected and country of operation ) CDR-1000 Receiver, CSH-1000 Transmitter, CS.
TELEX COM MU NI CA TIONS, INC. • 12000 Port land Ave. South, Burnsville, MN 55337. PN 803554 Rev. D JAN 2003 Made in U.S.A..
An important point after buying a device Telex CDR-1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Telex CDR-1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Telex CDR-1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Telex CDR-1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Telex CDR-1000 will certainly help you make a decision on the purchase.
If you already are a holder of Telex CDR-1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Telex CDR-1000.
However, one of the most important roles played by the user manual is to help in solving problems with Telex CDR-1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Telex CDR-1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
