Instruction/ maintenance manual of the product gfc 7000t Teledyne
Go to page of 13
Teledyne Analytical Instruments Manual Addendum Model GFC 7000T CO 2 Analyzer (Addendum to GFC 7000TA Manual, PN 07272) TELEDYNE ELECTRON IC TECHNOLOGIES Analytical Instruments 16830 Chestnut Street City of Industry, CA 91748 Telephone: (626) 934-1500 Fax: (626) 961-2538 Web: www.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments ii Copyright © 2013 Teledyne Analytical Instruments All Rights Reserved. No part of this manual may be reproduced, transmitted, .
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments iii ABOUT THIS ADDENDUM This addendum, part number 07273, is to be used in conjunction with the Model GFC 7000TA operation manual, part number 07272. Where opera tion of the Model GFC 7000T diverges from that of the Model GFC 7000TA, this addendum takes precedence.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments iv This page intentionally left blank.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments v TABLE OF CONTENTS About This Addendum ........................................................................................................... .... iii Table of Contents .
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments vi This page intentionally left blank..
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 1 1. OVER VIEW The Model GFC 7000T is a close derivative of the Model GFC 7000TA CO 2 Analyzer. The main differences are as follows. The optical bench is longer (14 m), making the instrument more sensitive at low CO 2 levels.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 2 PARAMETER SPECIFICATION 220 – 240 V 50/60 Hz Environmental Conditions Installation Category (Over voltage Category) II Pollut.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 3 4. PNEUMA TIC CONNECTIONS This section provides information on the basic pneumatic co nfiguration and the zero/span valve option pneumatic configuration.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 4 Figure 4-1. Pneumatic Connections for Pressurized Sample De livery (w/o Internal Pump) Figure 4-2.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 5 Table 4-1. Model GFC 7000T Pneumatic Connec tions Rear Panel Label Function SAMPLE Connect a gas line fr om the source of sample gas h ere. Calibration gasses are al so inlet here on un its without zero/span valve optio n installed.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 6 EXAMPLE: If the application is to measure between 0 ppm and 50 ppm, an appropriate Span Gas would be 40 ppm. If the application is to measure between 0 ppm and 100 ppm, an appropriate Span Gas would be 80 ppm.
Model GFC7000T Carbon Dioxide Analyzer Teledyne Analytical Instruments 7 6. RELA Y ALARM OUTPUTS (AIR PRODUCTS CONFIGURA TION) There are 4 relay alarm outputs (AL1-AL4) on the rear panel.
An important point after buying a device Teledyne gfc 7000t (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teledyne gfc 7000t yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teledyne gfc 7000t - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teledyne gfc 7000t you will learn all the available features of the product, as well as information on its operation. The information that you get Teledyne gfc 7000t will certainly help you make a decision on the purchase.
If you already are a holder of Teledyne gfc 7000t, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teledyne gfc 7000t.
However, one of the most important roles played by the user manual is to help in solving problems with Teledyne gfc 7000t. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teledyne gfc 7000t along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
