Instruction/ maintenance manual of the product BWD1200SS Baumatic
Go to page of 40
BWD1200SS Washer dryer.
USER MANUAL FOR YOUR BAUMATIC BWD1200SS Washer dryer NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
3 Contents Environmental note 4 Important safety information 5 – 6 Specifications 7 Description of the appliance 8 C o n t r o l p a n e l 9 P r o g r a m o p t i o n s 9 Wash program indicator neon.
ENVIRONMENTAL NOTE Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person.
IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the info rmation contained in this booklet, please contact the Baumatic Technical Department.
6 o Before the first use of the a ppliance, we advise that a 90 °C cotton wash is completed. No garments should be placed inside the machine; however a small amount of detergent must be used. During Use o It is recommended that the a ppliance is unplugged and the water supply is turned off after the machine is used.
7 Specifications 9 19 wash programs 9 6kg wash load/kg drying load 9 1200 rpm maximum spin speed 9 LED indicating programs, function and wash cycle progress.
Description of the appliance A - Glass porthole door B - Filter C - Adjustable feet D - Top cover E - Drum F - Control panel 8.
Control panel A - Start button B - Pre wash button C - Additional rinse button D - Drying timer control knob E - Wash program indicator neons F - Wash program control knob G - On/Off button Wash program control knob This control knob allows you to select the wash program of your choice.
Wash program indicator neons o During the wash cycle, the relevant wash program indicator neon will light, to advise what stage of the wash program the machine has reached. Wash program control knob o Turn this dial to select the wash or drying program that you require.
Detergent drawer 1) Pre wash section This compartment should have deterg ent placed in it, if you are going to select a wash program that has a pre wash as part of it. 2) Main wash section This compartment should have detergen t placed in it (you should also put a water softening agent in this section, if you use one).
Preparing the wash cycle Preparing your garments for washing o Your washing should be sorted out, according to the fabric type and the wash care symbol that is printed on the garment’s wash care label. (see separate section on wash care symbols). o Your washing should also be sorted out according to the degree of soiling.
A selection of wash care symbols o The wash care symbols should be used to help you to select the most suitable wash program. They will also help you to sort your laundry into different loads, depending on the fabric type and the highest temperature which the garment can be washed at.
Detergents and conditioners The amount of detergent that you n eed to use in your appliance, will depend on o The degree of soiling. Lightly soiled garments in general require less detergent. o The size of the wash load. A smaller wash load will require a reduction in the amount of detergent.
Wash program table (*) Program for wash and energy consumption assessment, in accordance with standard EN60456 (press intensive wash button). 15.
16 electing a wash program S 9 Load your laundry and put detergent in the relevant Close the porthole door firmly. 9 Switch on the appliance using the On/Off button, the Start 9 Select the most approp.
17 electing a separate drying program MPORTANT: Do not exceed th e maximum loads listed in the he timings in this table are approxim ate and refer to a wash load that 9 Load your laundry and then clos e the porthole door firmly.
18 electing an automatic wash and dry program 9 Load your laundry and then clos e the porthole door firmly. Turn the drying time control knob clockwise, to select a suitable 9 Select the most appropri.
19 ancelling or pausing a wash program To stop a wash program once a wash cycle is in progress, you n. o The appliance will go onto PAUSE status and the wash program At this stage you can either rese .
Maintenance and cleaning In daily use 9 Once a wash cycle has comple ted, you should pull out the detergent drawer slightly , so it can dry out. 9 Leave the porthole door ajar for a short while after a wash cycle has completed. This should help to prevent stagnant smells and to protect the door seal.
o Use warm water and a brush to thoroughly clean the three compartments of the detergent drawer. o Clean the area that the detergen t drawer slides into with a brush. o Replace the detergent drawer by placing it back into the slot. Then push the drawer fu lly back into position.
Poor wash results My garments are looking gr ey and there are limescale deposits present in the drum of my washer dryer. o There is not enough detergent being added. o The incorrect detergent is being used. o Stains are not being pre-treated. o The correct wash program or wash temperature was not selected.
Cleaning the drain pump filter IMPORTANT: Switch off your washer dryer and disconnect the plug from your mains supply. You should clean out the filter approximately every twenty washes. If the drain pump filter is not cleaned regularly, then your appliance may find it difficult to pump out wate r efficiently.
o Remove the filter and rinse out the filter under the tap. Remove any debris from the filter. o Remove any debris that is in th e area of the appliance that you removed the drain pump filter from. o Screw the filter clockwise back into position, making sure that it is fully tightened.
25 Removing stains Garments that are covered in stains , grease or are heavily soiled may need to be pre-washed or soaked before being placed inside of the washing machine. o Soaking helps to remove protein- type stains, like blood, milk or grass. o Pre-washing helps to loosen soil before the main wash.
26 Stain removal guide STAIN TO REMOVE Blood Rinse immediately in COLD water. If the stain remains, soak in cold water with an enzyme pre- wash. Chewing gum Use ice in a plastic bag to harden the gum. Scrape off what you can and the n sponge with white spirit.
Installation IMPORTANT: THIS INSTALLATION MUST BE COMPLETED BY A SUITAB LY QUALIFIED PERSON. BAUMATIC ONLY SANCTION THE INSTALLATION GIVEN IN THIS INSTRUCTION MANUAL. YOU SHOULD KEEP THE TRANSIT PACKAGING, I N CASE YOU NEED TO TRANSPORT THE MACHINE IN THE FUTURE.
9 There are four plastic covers that should be placed in the holes where the transit bolts were removed from. IMPORTANT: The transit bolts MUST be removed before your washing machine is used for the first time. Positioning and leve ling the appliance 9 Place the washing machine on a solid and level floor surface.
9 Once leveled correctly, you should tighten the lock nut back up on each of the washing machine feet using a spanner. IMPORTANT: When the washing machine is positioned in the location where it will be used. Make sure that all four feet are resting firmly on the floor, by pressing down on ea ch corner and checking that the appliance stands still.
9 IMPORTANT: There should be a filter si tting inside the end of the inlet hose that connects to your mains water supply. The inlet hose may leak if this filter is missing . This filter is supplied with the appliance, you should contact Baum atic to obtain one, if it is missing.
Power supply 9 IMPORTANT: The electrical socket must still be accessible once the appliance is installed. 9 Consult the rating plate, located on the back of the appliance BEFORE making the electrical connections. Ensure that the voltage reaching the plug, is the same as that on the rating plate.
Before first use ma intenance wash o When your washer dryer has b een correctly installed, we recommend that you perform a maintenance wash cycle. o This will check that all aspects of the installation are correct; it will also remove any deposits that may have been left on the drum by the manufacturing process.
33 Troubleshooting chart Problem Checkpoint o The washer will not operate at all. o Is there a power failure? o Is the power cord correctly connected to the electrical outlet? o Did you turn on the power? o Did you press the On/Off button? o Is there the correct amount of laundry in the washer? o Water is not entering the drum.
IMPORTANT: If your appliance appears not to be operating correctly, then yo u should disconnect it from your mains supply and then contact the Baumatic Service Department on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
35 General troubleshooting Water under the washer dryer o Tighten the drain pump filter. o Check the drain and inlet hose and make sure that they are both fully tightened. Washer dryer vibrates during the spin cycle o Check that the transport locking devices have been removed (see installation instructions).
36 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Service Telephone (0118) 933 6911 Service Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Technical Advice Telephone (0118) 933 6933 E-mail: sales@baumatic.
37.
38.
39.
40 40.
An important point after buying a device Baumatic BWD1200SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic BWD1200SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic BWD1200SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic BWD1200SS you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic BWD1200SS will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic BWD1200SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic BWD1200SS.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic BWD1200SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic BWD1200SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
