Instruction/ maintenance manual of the product BR201.3A Baumatic
Go to page of 32
agu BR201.3A Fridge with freezer compartment.
USER MANUAL FOR YOUR BAUMATIC BR201.3A Fridge with freezer compartment NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
Contents E n v i r o n m e n t a l n o t e 4 Important safety informa tion 5 – 6 Specifications of your frid ge with freezer compartment 7 D e s c r i p t i o n o f t h e a p p l i a n c e 8 Descrip.
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of th e information contained in this booklet, please contact the Baumatic Technical Department.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.
7 Specifications of your fridge with freezer compartment Congratulations on purchasing a Baumatic fridge with icebox. o Automatic defrost (fridge section only) o Adjustable thermostat o Egg rack o But.
Description of the appliance 1. Refrigerator shelf 2. Crisper cover 3. Crisper 4. Adjustable feet 5. Thermostat control 6. Freezer compartment 7. Egg shelf 8.
Description of the product features 1) Shelves o The shelves may be placed in an y of the guide slots within the interior of the appliance. They are protected from sliding out. o To remove a shelf : Take off all of the it ems that are stored on the shelf that you want to remove.
Using your Baumatic fridge with freezer compartment Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eigh t hours before connecting the appliance to your mains supply.
Turning on the appliance an d setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The ther mostat is located on the upper right hand side of the inside of the cabinet, next to the interior light.
12 Arranging and storing food in your refrigerator o Warm food or evaporating liquids should not be stored in your refrigerator, as this will increa se the humidity inside of the appliance. o All foods should be wrapped or covered, this is particularly important if the food has a st rong flavour.
The freezer compartment The freezer compartment is suitab le for storing and freezing food. o The freezer compartment temperature must have already reached -18 degrees centigrade (o r lower) before you attempt to store food that is already frozen or f reezing fresh food.
Freezing fresh food o To freeze the maximum quantity of fresh food specified above, you should turn the thermostat up to the highest setting 24 hours prior to attempting freezing. 14 o For smaller quantities of fresh food, the thermostat should be turned up to its highest setting approximately 6 hours prior to attempting freezing.
Freezer compartment d oor open indicator There is a door indicator on the lo ck of the freezer compartment door, which will advise you whether the door of the icebox is shut properly or not. o If the red indicator is visible, then the freezer compartment door is still open and should be closed properly.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it.
o The evaporating tray and defrost water drain hole should be cleaned periodically with the defr ost drain plug. This will prevent water from collecting in the bottom of the refrigerator, instead of flowing down the defrost drai nage channel and drain hole.
do this will result in immediate ice build when the appliance is turned back on. o With dry hands, reconnect your appliance to your mains supply. Set the thermostat knob to posi tion <5> for a 24 hour period, before returning it to the norm al setting of between <3> and <4>.
Installation IMPORTANT: Before installation and usage, read all the instructions and make sure tha voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the fr ont left edge of the 19 t the inside of the refrigerator.
Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is st ated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outs ide of the following ranges.
Aperture and appliance dimensions 2) Figure 2 shows the aperture size th at you will need to be able to install your appliance. o The appliance must be stood on a level floor. You can use the leveling feet to take into ac count any minor unevenness in the floor.
Installing your refrigerator If you need the appliance door to open from the other side, then please reverse the door before commencing the installation process. (See Reversing the door section). 4) Insert the top fixing bar ( a ) into the slot on the top of the appliance.
6) Align the front feet of the applia nce, with the front edge of the kitchen unit. Fix the front feet into position us ing the Ø4 x 17 fixing screws ( e ). 7) Screw the top fixing bar to the und erneath of the kitchen unit using the Ø4 x 17 fixing screws ( e ).
8a) Fit the door guides ( d ) to the appliance door but do not secure them at this stage. o Open the furniture door and the appliance door to their fullest positions. Both of the doors should still be in contact with each other. o Using a pencil, mark where the edge of the appliance door meets with the furniture door.
Reversing the door of your appliance Caution! After unscrewi ng any of the fix ing hinges, hold the door to prevent it from falling and causing damage. 25 be retained for later use. o E w the upper o ve e opposite side of the door. o ix it to the opposite side of the door (certain mode o the door from the bottom hinge.
Troubleshooting IMPORTANT: If your refrig erator appears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. My fridge does not appear to be working/there is no power to my appliance. o Check that the plug is fully in serted into the power socket.
27 Baumatic Ltd. Conditions of guarantee Dear Customer, Your new Ba umatic appliance com es complete with a free 12 month guarantee cove ring bot h parts an d labour costs resulting from defective materials or workmanship.
Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephone +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telephone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Advice Telephone +44 118 933 6933 E-mail : sales@baumatic.
29.
30.
31.
32 32.
An important point after buying a device Baumatic BR201.3A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic BR201.3A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic BR201.3A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic BR201.3A you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic BR201.3A will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic BR201.3A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic BR201.3A.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic BR201.3A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic BR201.3A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
