Instruction/ maintenance manual of the product TFI 130 D Teka
Go to page of 17
Installation instructions 39 Instructions for Use Refrigerator - Freezer Thank you for your trust and for buying this appliance. We hope it will successfully serve the purpose for many years.
Installation instructions 40 Before Putting Into Use • Before connecting the appliance to the mains supply, leave it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance, and be thorough, especially in the interior (See Cleaning and Maintenance).
Installation instructions 41 Tips for Energy Savings • Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible. This is especially important if you have an upright model.
Installation instructions 42 • For the sake of environment protection - be careful not to damage the rear wall of the appliance (the condenser unit or the tubes - for example when moving the appliance) or any part of the refrigerating system inside the appliance.
Installation instructions 43 Placing and Installation Choosing the Right Place Place the appliance in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.
Installation instructions 44 Description of the Appliance Refrigerator (A) Refrigerator is used for storing fresh foods for few days. Freezer (B) Freezer is used for freezing fresh foods and for storing already frozen foods.
Installation instructions 45 Shelf (1) The shelf may be placed randomly upon any of the guide slots within the interior of the appliance. It is protected against sliding out.
Installation instructions 46 Operation Control The appliance is controlled with thermostat knob, situated in the right upper part inside the appliance.
Installation instructions 47 Use Storing Fresh Foods Proper use of the appliance, adequately packed food, correct temperature and taking into account hygienic precautions will substantially influence the quality of the food stored.
Installation instructions 48 Fresh Food Storage Time in the Refrigerator Article of food Storage time (days) 123456 789 1 0 1 1 1 2 1 3 1 4 Butter + + + + + + + = = = = = Eggs + + + + + + + + + + = = .
Installation instructions 49 • For freezing smaller amount of foods (up to 1 kg) there is no need to change the thermostat setting (see Temperature Selection).
Installation instructions 50 How to make ice cubes Recommended thermostat position for ice making is on the middle setting. Fill two thirds of the ice tray with cold water or any other liquid convenient for freezing. Insert the ice tray into the guides or on the cooling plate.
Installation instructions 51 Maintenance and Cleaning Automatic Defrosting of the Refrigerator The refrigerator requires no defrosting, since the ice at the rear wall melts automatically.
Installation instructions 52 − replace the condenser dish and the bottom rail in the opposite order. After cleaning, connect the appliance to power supply and reload it.
Installation instructions 53 Trouble-Shooting Guide During the service, you can come across some troubles that in most cases result from improper handling of the appliance and can easy be eliminated.
Installation instructions 54 Sound alarm The excessive dust upon the condenser is signaled by the sound alarm, heard at each opening of the appliance door – until the default is removed. Check the air circulation through the bottom rail openings and if necessary clean or vacuum the dust from the condenser.
Installation instructions 55 − Check the accesories in the interior of the appliance, they should be placed correctly in their positions; also check the bottles, tins and other vessels that might touch each other and rattle. Bulb Replacement Before replacing the light bulb, disconnect the appliance form the power supply.
An important point after buying a device Teka TFI 130 D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teka TFI 130 D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teka TFI 130 D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teka TFI 130 D you will learn all the available features of the product, as well as information on its operation. The information that you get Teka TFI 130 D will certainly help you make a decision on the purchase.
If you already are a holder of Teka TFI 130 D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teka TFI 130 D.
However, one of the most important roles played by the user manual is to help in solving problems with Teka TFI 130 D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teka TFI 130 D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
