Instruction/ maintenance manual of the product NF1 620 Teka
Go to page of 47
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Contents T echnical specifications of your refrigerator > 3 Prior to operating your refrigerator Safety precautions ........................................5 Installing Y our Refrigerator ...........................6 Operating your refrigerator ...
2 1 13 10 Freezer compartment Fridge compartment Freezer compartment glass shelf Freezer compartment illumination lamp (only in some models) Icematic Freezer compartment wire grid shelf Freezer compar.
(Power failure safety; it is recommended not to consume the food in freezer compartment after this period.) Refrigerator/deep-freeze for domestic use A 560 383 179 8 13 SN-T 46 562 177,5 92,5 74 130 2.
Prior to operating your refrigerator 2 • Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed.
Safety precautions 5 • When you want to dispose/scrap the product, we recommend you to consult the authorized service in order to learn the required information and authorized bodies.
Placing and Installation Caution: Never plug the refrigerator in to the wall outlet during installation. Otherwise, risk of death or serious injury may arise.
Floor balance adjustment If your refrigerator is unbalanced; 1. Y ou can balance your refrigerator by turning the front legs of it as illustrated in the figure. The corner where the leg exists is lowered when you turn in the direction of black arrow and raised when you turn in the opposite direction.
Door height adjustment Door can be raised vertically . This process can be performed easily using an Allen wrench as illustrated in the figure. Door shelves should be empty when adjusting the door height. • Remove the lower ventilation cover as described in the previous page.
• The factory setup temperature during the first operation is 4°C for fridge compartment and -18°C for freezer compartment. • Y our refrigerator's compressor will start running approximately 1 minutes after the refrigerator is plugged in during first usage.
-18°C 4°C This is the normal usage condition. Freezer compartment is running as a deep-freezer . -20,-22 or -24°C 4°C This is recommended adjustment level when the ambient temperature exceeds 30°C. Fast freeze process 4°C Use this when you wish to freeze your food or make ice in a short time.
Making the fridge compartment temperature adjustment When you want to change your refrigerator's temperature settings, you need to press the “Fridge compartment temperature adjustment button” to make the fridge compartment temperature adjustment.
Icematic • When the Icematic water supply reservoir (1) is removed from its place in order to fill it up, it must be replaced within two minutes after it is filled with water . The nozzle of the system will open and the Icematic cells will be filled with water automatically as soon as the cartridge is seated in its place.
Sliding body shelves Sliding body shelves can be moved back and forth easily in the shelf channels. Thus, you can easily reach the food you place behind the shelf. Breakfast tray Breakfast tray located under the shelf can be moved back and forth easily in the shelf channels.
Crisper or Chiller (0°C i. e. zero degree centigrade compartment (1) • The drawer at the bottom of the fridge compartment can be converted into a salad crisper or a Chiller Compartment.
15 Breakfast tray Freezer compartment drawer Butter & Cheese section Egg holder Fridge compartment shelves Fridge compartment door shelves Crisper Crisper / zero degree compartment Freezer compartment shelves Breakfast stuff, delicatessen V arious frozen food such as meat, fish, ice cream, vegetables and etc.
4 Food must be frozen as rapidly as possible when they are put in a refrigerator in order to keep them in good quality . The TSE norm requires (according to certain measurement conditions) the refrigerator to freeze 4 kg of foodstuff at 32°C ambient temperature to -18°C or lower within 24 hours for every 100-liters of freezer volume.
5 6 17 Cleaning your refrigerator W arning!!! Never use gasoline, benzene or similar substances for cleaning purposes. 1. Is the refrigerator properly plugged in? 2. Has the fuse of the socket which the refrigerator is connected to or the main fuse blown out? 3.
Please revise this list before calling the service. It might save you time and money . This list includes frequent complaints that are not arising from defective workmanship or material usage. Complaint Possible Reason Solution Compressor is not running The fridge is running frequently or for a long time.
Complaint Possible Reason Solution Having very low temperatures Freezer temperature is very low while the fridge temperature is sufficient. Fridge temperature is very low while the freezer temperature is sufficient. Food kept in the drawers freeze. Meat kept in the zero degree compartment freezes.
Complaint Possible Reason Solution Sound and noise. The operation sound increases when the refrigerator is running. The operation sound increases when the compressor starts running. Vibrations or clatters. W ater/humidity/ice in the refrigerator . Condensation on the inner walls of refrigerator .
Complaint Possible Reason Solution Opening and closing of the doors. The door(s) is/are not closing. Drawers can be hardly moved. Food packages prevent the door's closing.
.
48 4500 0000 1/3.
An important point after buying a device Teka NF1 620 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teka NF1 620 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teka NF1 620 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teka NF1 620 you will learn all the available features of the product, as well as information on its operation. The information that you get Teka NF1 620 will certainly help you make a decision on the purchase.
If you already are a holder of Teka NF1 620, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teka NF1 620.
However, one of the most important roles played by the user manual is to help in solving problems with Teka NF1 620. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teka NF1 620 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
