Instruction/ maintenance manual of the product TM9235 EN Technicolor - Thomson
Go to page of 15
EN Safety Information For UK Only CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPL Y 230V . It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below .
EN Safety Information CAUTION! Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER λ = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit.
EN Important Information Safety Precautions • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.
EN T able of Contents Safety Information Important Information T able of Contents .............................. 1 Before Y ou Begin ............................... 2 Useful advice .................................................... 2 AC Power ......
EN Befor e Y ou Begin Useful Advice • Do not use your system immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. If moisture forms inside this system, it may not operate properly .
EN Battery Power Y ou can insert 6 D-sized alkaline batteries (not supplied) and you can take your stereo just about anywhere. • Open the battery compartment door on the bottom of the unit by pressing down on the tab and pulling out the cover .
EN Befor e Y ou Begin What’ s so special about this audio CD / mp3 disc player? Besides traditional audio CDs, this player is meant to play mp3 files encoded on a CD-ROM.
EN General Contr ols Main Unit 5 Function Switch – selects OFF , RADIO or CD mode. PLA Y/P AUSE - Plays and pauses CD and mp3 playback. SKIP BACKWARD - In CD/mp3 mode, goes back to the previous CD or mp3 track or searches backward. SKIP FORWARD - In CD/mp3 mode, goes to the next CD or mp3 track or searches forward.
EN Display Sound Featur es V olume Control Adjust the VOLUME knob to your desired listening level. Tips: Tips: Tips: Tips: Tips: You may listen through headphones by inserting one pair into phones jack. Bass Boost System Press DBBS BASS to turn on and off DBBS function.
EN T uning to a station 1. Select RADIO with the function switch. 2. Slide the RADIO BAND switch to select between FM and MW band. 3. Rotate TUNING to select radio station. Tips: Tips: Tips: Tips: Tips: Extend or reposition the antenna for better FM reception.
EN 8 mp3 and CD Player Play and Pause 1. In stop mode, press PLA Y/P AUSE t o begin CD / mp3 playback. The icon is displayed. 2. During CD / mp3 playback, press PLA Y/P AUSE to pause playback. Press again to resume. The icon flashes in pause mode. Skip and Sear ch 1.
EN mp3 and CD Player Program playback 1. In CD mode, press PROG . to enter program mode. 2. Press PLA Y/P AUSE to start program playback. Creating the Pr ogram 1. In CD mode, press PROG. to enter program mode. The PROG. icon flashes on the display . 2.
EN mp3 and CD Player 10 mp3 File System • This unit adopts a 2-layer folder system, the root folder and all subfolders in a mp3 disc will be treated as independent folders. • Empty folders will not be shown when browsing through the disc, but it would still be counted as a folder in stop mode.
EN Tr oubleshooting Tips Problem System doesn’t turn on No sound Poor radio reception CD doesn’t play CD sound skips CD button do not respond Cannot play mp3 disc Solution • Unplug the unit for a moment, and then plug it back in. • Check the outlet by plugging in another device • Adjust volume setting.
EN Cleaning the exterior • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth • Clean the exterior with a soft clean cloth or slightly moistened chamois leather . DO NOT use solvents as it may cause damage to the unit.
An important point after buying a device Technicolor - Thomson TM9235 EN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Technicolor - Thomson TM9235 EN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Technicolor - Thomson TM9235 EN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Technicolor - Thomson TM9235 EN you will learn all the available features of the product, as well as information on its operation. The information that you get Technicolor - Thomson TM9235 EN will certainly help you make a decision on the purchase.
If you already are a holder of Technicolor - Thomson TM9235 EN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Technicolor - Thomson TM9235 EN.
However, one of the most important roles played by the user manual is to help in solving problems with Technicolor - Thomson TM9235 EN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Technicolor - Thomson TM9235 EN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
