Instruction/ maintenance manual of the product B65.1W Baumatic
Go to page of 24
1 B65.1SS/B65.1W 4 Solid plate electric hob.
User Manual for your Baumatic B65.1SS/B65.1W 60cm 4 Solid plate electric hob NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
3 Contents E n v i r o n m e n t a l n o t e 4 IMPORTAN T SAFETY IN FORMATION 5 – 8 Specifications 8 - 9 Product and aperture dimensions 8 Product specifications 8 Standard accessories 8 E l e c t r.
Environmental note 4 o The packaging materials that Baum atic uses are environmentally friendly and can be recycled. all packaging mate rial with due regard for the environment.
5 IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If yo are unsure of any of the info rmation contained in t u his ooklet, please contact the Baumatic Advice Line.
6 hild Safety d ny time . During and after use, all surfaces will become hot. se ensure that they are kept under close supervision at all times. ld only be allowed to utilise the appliance when supervised.
7 leaning Cleaning of the hob should be carried out on a regular basis. should be disconnected from the mains and allowed to cool. using this appliance and when following the cleaning procedure. high pressure cleaning equipment to clean the appliance.
o Pans should be lifted on an d off the hob surface and not dragged. o Cooking zones should not be sw itched on without cookware placed on it. Also the cookware should not be empty. Specifications Product dimensions: Aperture dimensions: Depth: 500 mm Depth: 480 mm Width: 595 mm Width: 560 mm Height: 40 mm Product specifications: o 2 x 1.
For future reference please record the following information which can be found on the rating plate and th e date of purchase which can be found on your sales invoice. The rati ng plate of your hob is located on the underneath of the appliance. Ther efore it is a good idea to record this information before yo u install your appliance.
Using the hob Before first use IMPORTANT: You should clean the hob surface and solid plates (see “Cleaning and maintenance” section). o You should switch on one cooking zone at a time, for 5 minutes at the maximum setting.
11 Hob guidelines o The first few times the hob top is used, it may give off an acrid, burning smell. This smell will di sappear completely with repeated use. o The hob surface is fitted with cooking areas of different diametre and power. o The positions where the heat will radiate from are clearly marked on the hob top.
o DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC CUSTOMER CARE DEPARTMENT IMMEDIATELY. Cleaning and maintenance Cleaning and maintenance operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before co mmencing any cleaning process.
Using a specialist hob cleaner It is possible to purchase specialist ceramic hob cleaner/conditioner. You should follow the instructions given by the manufacturer of the specialist ceramic hob cleaner. You shou ld ensure that it is suitable for use on your appliance.
Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size) or 600 mm worktop that is at least 30 mm thick.
Installing the appliance o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance an d any surface that is below it. o Carefully turn the hob upside do wn and place it on a cushioned mat.
o Do not leave a gap in the sealing agent or overlap the thickness. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future, pa rticularly if it needs to be serviced.
WARNING: THIS APPLIANC E MUST BE EARTHED. o This appliance must be wired into a 30 A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjace nt to the appliance. It should not be located above the appliance and no more than 1.
o IMPORTANT: The appliance must NOT be connected to the mains supply by means of a 13A plug and socket. o The cable can be looped if necessary, but make sure that is not kinked or trapped when the hob is in position. Care must be taken to avoid the cable being in contact with hot parts of the appliance.
o The cooking zones have become discoloured * This maybe caused by burnt on remnants of food. This will not affect the working of the applia nce. However you should make sure that the cleaning instruct ions are being followed regularly.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.
21.
22.
23.
24.
An important point after buying a device Baumatic B65.1W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Baumatic B65.1W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Baumatic B65.1W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Baumatic B65.1W you will learn all the available features of the product, as well as information on its operation. The information that you get Baumatic B65.1W will certainly help you make a decision on the purchase.
If you already are a holder of Baumatic B65.1W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Baumatic B65.1W.
However, one of the most important roles played by the user manual is to help in solving problems with Baumatic B65.1W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Baumatic B65.1W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
