Instruction/ maintenance manual of the product FLEX52W Tech Craft
Go to page of 22
GUSD OR F . 00.R0 Model/Modèle/Modelo FLEX52W rev . 01.R2 GENERAL WARNING / AVERTISSEMENT GÉNÉRAL / ADVERTENCIA GENERAL FAILURE TO READ AND FOLLOW THIS INFORMATION AND INSTRUCTION MANUAL COULD RESULT IN SERIOUS INJURY OR DAMAGE.
USE: Do not use this product for any purpose or use not specified by TECHCRAFT. INSTALLATION : Installation by a professional contractor is strongly recommended (particularly for options #1 and #3).
3 2 1 0 0 TOP GLASS SHELF / T ABLETTE SUPÉRIEURE EN VERRE / T abla superiore de vidrio POST / POTEAU / Poste 10 11 20 RECT . BRACKET HOOK / CROCHET D’ANCRAGE / Gancho de sujeción 12 10 MIDDLE GLAS.
.
.
.
.
.
.
.
TECHCRAFT highly recommends that you use a qualified professional contractor to perform the entire installation. TECHCRAFT is NOT liable for any damages or injury caused by incorrect use of the produc.
INSTALLATION FOR WALL MOUNT OF A MOUNTING FRAME ON A WOODEN FRAME. IF YOU WANT TO HANG YOUR TV ON THE WALL, FOLLOW THESE STEPS. 4x IHA0547 ø7.6 x 62 mm 12 OPTION 3 DETAIL #2 DETAIL #1 stud sensor 16 inches IHA0546 IHA0547 1- The mounting frame must be mounted to two studs at least 12” apart.
INSTALLATION OF MOUNTING FRAME ON SOLID CONCRETE OR CINDER BLOCKS. OPTION 3 ø7.6 x 62 mm IF YOU WANT TO HANG YOUR TV ON THE WALL, FOLLOW THESE STEPS. 13 1- Use the mounting frame as a template to mark six (6) holes on the wall. The outer holes must fall to left and right of the four (4) small slots in the middle of the frame.
- Use the screws included with your television. or Choose the correct screw set among the sets included with the TV stand, (M4 x 12 or M4 x 30 or M 5x1 2o rM 5x3 0o rM 6x1 2o rM 6x3 0o rM 8x1 6o rM 8x.
TECHCRAFT recommande fortement de faire appel à un entrepreneur qualifié pour faire l’installation complète. TECHCRAFT ne pourra être tenu responsable de dommages ou blessures causés par une ut.
INSTALLATION SUR UN SUPPORT MURAL DU CADRE DE MONTAGE SUR UNE OSSATURE DE BOIS. SI VOUS DÉSIREZ INSTALLER VOTRE TÉLÉ AU MUR, SUIVRE CES ÉTAPES. 4x IHA0547 SCHÉMA #2 SCHÉMA #1 detecteur de montant 16 inches ø7.
INSTALLATION SUR UN MUR DE BÉTON OU DE BLOCS D’UN CADRE DE MONTAGE. OPTION 3 ø7.6 x 62 mm SI VOUS DÉSIREZ INST ALLER VOTRE TÉLÉ AU MUR, SUIVRE CES ÉT APES.
- Utiliser les vis incluses avec votre téléviseur ou Choisir l' ensemble de vis appropriées parmi l' ensemble inclus avec votre meuble, (M4 x 12 ou M4 x 30 ou M5 x 12 ou M5 x 30 ou M6 x 1.
TECHCRAFT recomienda fuertemente que usted use a un contratista cualificado para realizar la instalación completa. TECHCRAFT NO es responsable de ningún daños o heridas causados por una utilizació.
Instala ci ó n sobre un soporte mural de un marco de montaje sobre un armazón de madera. Si usted quiere instalar su tele sobre la pared, seguir estas etapas.
Instala ci ó n sobre un pared de hormigón o de bloques de un marco de montaje. OPCIÓN 3 ø7.6 x 62 mm Si usted quiere instalar su tele sobre la pared, seguir estas etapas.
Utilisar los tornillos incluidos con su televisión. o Escoger el juego de tornillos apropiados entre el juego incluido con su meuble, (M4 x 12 o M4 x 30 o M 5x1 2oM 5x3 0oM 6x1 2oM 6x3 0oM 8x1 6oM 8x.
An important point after buying a device Tech Craft FLEX52W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tech Craft FLEX52W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tech Craft FLEX52W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tech Craft FLEX52W you will learn all the available features of the product, as well as information on its operation. The information that you get Tech Craft FLEX52W will certainly help you make a decision on the purchase.
If you already are a holder of Tech Craft FLEX52W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tech Craft FLEX52W.
However, one of the most important roles played by the user manual is to help in solving problems with Tech Craft FLEX52W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tech Craft FLEX52W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
