Instruction/ maintenance manual of the product CDX10I Teac
Go to page of 28
9A10495701 Z Micr o Hi-Fi System OWNER’S MANUAL CD - X1 0 i Includes adapters for: iPod nano iPod with video iPod mini iPod with Click Wheel iPod with color display Adapters sold separately: iPod wi.
2 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 This product has been designed and manufactured according to FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968“, and is classified as class 1 laser product.
4 Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Using the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Discs . . . . . . . . . . . . . . . . . . . . . . . .
5 Discs Discs which can be played on this unit: • Conventional audio CDs bearing the COMPACT DISC DIGITAL AUDIO logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable.
6 Connections Speaker (R) FM antenna AM antenna Speaker (L) Subwoofer Side panel of the main unit Dock A C B D F E G CAUTION: Make sure to fasten the Dock’ s cable with this clip. CAUTION < Turn off the power of all the equipment before making connections.
7 SPEAKERS Connect the left speaker’s plug to L, and the right speaker’s plug to R. < If not using the included speakers, make sure the speakers you use are at least 4 Ω impedance. < Do not connect anything other than speakers to these terminals.
8 Unit Functions D A B C E F G H J A C D M N Q O B E H I K L T R S V U W J I P.
9 FM MODE In FM TUNER mode, use this button to select stereo or monaural. PRESET/SCROLL In TUNER mode, use these buttons to select a preset station. In iPod mode, use these buttons to scroll up and down the menu. MENU This button is equivalent to the MENU button on your iPod.
10 W all Mounting You can mount the main unit and/or the left and right speakers on a wall. Precautions < Pay attention to the length of cables. iPod Dock: 39” (1m) Speaker and Subwoofer cables: 118” (3m) Do not attempt to mount the main unit and the speakers too far from the subwoofer and the Dock.
11 The CD-X10i comes mounted with an adapter for iPod with color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”. To play your iPod through the CD-X10i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below.
12 Basic Operation 2 3 4 1 The ring surrounding the STANDBY/ON button lights when the unit is on. < To listen to an external source connected to the AUX IN jack, select AUX. < In iPod and AUX modes, the display always shows the clock and the volume level.
13 Muting To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound. Headphones For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons.
14 Listening to iPod Select “iPod” using the FUNCTION button. If an iPod is already docked, playback will start. In iPod mode, press the Play/Pause button ( G / J ) to start or pause playback. Insert the iPod into the Dock of the CD-X10i. Then press the Play/Pause button ( y / J ) on the iPod.
15 T o activate the shuffle mode During playback, press the SHUFFLE button to change the shuffle mode. Each time the SHUFFLE button is pressed, the SHUFFLE setting of iPod is changed as follows: If iPod is set to shuffle songs or albums, the Shuffle icon ( ) appears in the iPod’s display.
16 Listening to CD 4 2 1 3 5 Press the FUNCTION button to select “CD”. 1 Press the OPEN/CLOSE button. 2 Put a disc onto the center spindle of the player with the label side facing you. Press the disc onto the spindle until a slight “click” is heard indicating the disc is mounted correctly.
17 T o suspend playback temporarily (pause mode) Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button ( G / J ) again. T o stop playback Press the Stop button ( H ) to stop playback.
18 MEMORY FUNCTION Up to 32 tracks can be programmed in the desired order. If another source is selected, select “CD” using the FUNCTION button. 1 Press the MEMORY button. 2 The MEMORY indicator blinks on the display. < To cancel the program mode, press the Stop button ( H ).
19 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “ -- ” appears on the display.
20 Connect the PHONES jack (audio output jack) of a portable audio player to the AUX IN jack of the CD-X10i using the supplied stereo mini plug cable. 1 Listening to an Exter nal Source Play the source, and adjust the volume using the VOLUME buttons of the CD-X10i and of the audio player.
21 Listening to the Radio 2 3 1 Press the FUNCTION button to select “TUNER”. 1 < You can also use the FM/AM button to select “TUNER”. Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the Skip button ( .
22 Preset T uning You can program 10 FM & 10 AM channel presets. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 21).
23 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more.
24 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button for more than 2 seconds and release it when the “hour” value starts blinking.
25 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day. Don’t forget to turn the unit off (standby), or the timer won’t work.
26 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on.
27 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . .
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
An important point after buying a device Teac CDX10I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teac CDX10I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teac CDX10I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teac CDX10I you will learn all the available features of the product, as well as information on its operation. The information that you get Teac CDX10I will certainly help you make a decision on the purchase.
If you already are a holder of Teac CDX10I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teac CDX10I.
However, one of the most important roles played by the user manual is to help in solving problems with Teac CDX10I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teac CDX10I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
