Instruction/ maintenance manual of the product A-H300mkII Teac
Go to page of 28
9A10000400 OWNER’S MANUAL MANUEL DU PROPRIÉT AIRE MANUAL DEL USUARIO Integrated Ster eo Amplifier Z A - H300mk @ ENGLISH FRANÇAIS ESPAÑOL.
2 IMPOR T ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
3 ENGLISH IMPORT ANT (for U.K.Customers) DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
4 Contents CAUTION The product shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on the product. Do not install this equipment in a confined space such as a book case or similar unit. Thank you for choosing TEAC.
5 ENGLISH Reference 300mk @ If you have TEAC Reference 300mk @ series, convenient system control operations and AI direct play functions are possible. < By pressing the STANDBY/ON button of A-H300mk @ , you can switch ON/standby all the unit connected by remote control cords.
6 CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.
7 ENGLISH AUDIO IN/OUT jacks Analog 2-channel audio signal is input or output from these jacks. Connect the component with commercially-available RCA cables. Make sure to connect : white plug q white jack (L: left channel) red plug q red jack (R: right channel) SIGNAL GND Connect the ground lead of the turntable to this terminal.
8 A C B D F G H I J K E Names of Each Control b c d e f g h e a E D.
9 ENGLISH POWER Press this switch to turn the unit standby or off. STANDBY/ON When the POWER switch of the main unit is depressed, use this button to turn the unit on or standby. The standby indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off.
10 Basic Operation Play the source, and gradually turn up the volume to the required level by turning the VOLUME knob. 5 Start recording on the cassette tape deck connected to TAPE 1 or TAPE 2 (or both). You can use both TAPE 1 and 2 for recording. < The volume and tone control have no effect on the recording signals.
11 ENGLISH If you want to dub from TAPE 2 to TAPE 1, select “TAPE 2 t 1”, and set the INPUT SELECTOR to “TAPE 2”. Start recording on the cassette tape deck connected to TAPE 2 (or TAPE 1). Start playback on the cassette tape deck connected to TAPE 1 (or TAPE 2).
12 Sommaire ATTENTION Ne pas exposer l'appareil à l'humidité ou aux projections d'eau; ne pas poser d'objets contenant de l'eau, tels qu'un vase, ou un liquide quelconque, sur l'appareil. Ne pas installer l'appareil dans un endroit clos tel qu'une bibliothèque ou un meuble fermé.
13 FRANÇAIS Référence 300mk @ Avec les appareils de la série Référence 300mk @ , il est possible de contrôler le fonctionnement du système et exécuter les fonctions intelligentes de lecture directe.
14 PRÉCAUTION: < Coupez l’alimentation de tous les appareils avant d’effectuer les raccordements. < Lisez les instructions qui accompagnent chaque appareil que vous avez l’intention d’utiliser en association avec cet appareil-ci. < Veillez à ce que chaque fiche soit soigneusement insérée.
15 FRANÇAIS Prises AUDIO IN/OUT Un signal audio analogique 2 canaux d’entrée ou de sortie est disponible sur ces prises.. Raccordez l’appareil avec des câbles standard de type RCA.
16 A C B D F G H I J K E Nom de chaque commande b c d e f g h e a E D.
17 FRANÇAIS POWER Appuyez sur cet interrupteur pour allumer ou mettre en veille l’appareil. STANDBY/ON Lorsque l’interrupteur secteur de l’appareil principal est enclenché, utilisez ce bouton pour mettre en marche (ON) ou en veille (STANDBY) l’appareil.
18 Fonctions de base Activez la source, et amenez graduellement le volume au niveau requis en tournant le bouton de VOLUME. 5 Commencez à enregistrer avec le magnétocassette connecté en TAPE 1 ou TAPE 2 (ou les deux). Vous pouvez utiliser à la fois TAPE 1 et 2 pour enregistrer.
19 FRANÇAIS Si vous voulez copier de TAPE 2 vers TAPE 1, sélectionnez “TAPE 2 t 1”, et mettez le sélecteur d’entrée (INPUT SELECTOR) sur “TAPE 2”. Commencez d’enregistrer sur le magnétocassette connecté à TAPE 2 (ou TAPE 1). Mettez en lecture le magnétocassette connecté à TAPE 1 (ou TAPE 2).
20 Especificaciones Seccón del amplificador Salida de potencia . . . . . . . . 45 W + 45 W (6 Ω , 1 kHz, 0,5%) Distorsión armonica total . . . . . .
21 ESPAÑOL Reference 300mk @ Si dispone de la serie TEAC Reference 300mk @ , podrá utilizar las prácticas operaciones de control del sistema y las funciones de reproducción directa AI. < El botón STANDBY/ON del A-H300mk @ le permitirá apagar y encender todas las unidades que estén conectadas mediante cables de control remoto.
22 PRECAUCIÓN: < Apague todos los equipos antes de realizar las conexiones. < Lea las instrucciones de cada equipo que intenta utilizar con esta unidad.
23 ESPAÑOL Conectores AUDIO IN/OUT La señal de audio analógico de 2 canales se envía y recibe a través de estos terminales. Utilice cable RCA (de venta en comercios) para conectar el componente.
24 A C B D F G H I J K E Nombres de los contr oles b c d e f g h e a E D.
25 ESPAÑOL POWER Pulse este interruptor para encender o apagar la unidad. STANDBY/ON Con el interruptor POWER de la unidad principal pulsado, utilice este botón para encender y apagar el equipo. El indicador de apagado se ilumina cuando la unidad se encuentra en el modo de espera.
26 Funcionamiento básico Ponga en marcha el equipo fuente, y eleve gradualmente el volumen hasta el nivel deseado con el mando VOLUME. 5 Inicie la grabación de la platina conectada a TAPE 1 o TAPE 2 (o ambas). Puede usar tanto TAPE 1 como TAPE 2 para grabar.
27 ESPAÑOL Si desea copiar de TAPE 2 en TAPE 1, seleccione “TAPE 2 t 1”, y sitúe el selector de entrada en “TAPE 2”. Inicie la grabación en la platina conectada a TAPE 2 (o TAPE 1). Inicie la reproducción en la platina conectada a TAPE 1 (o TAPE 2).
0704 . MA-0872 C Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
An important point after buying a device Teac A-H300mkII (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teac A-H300mkII yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teac A-H300mkII - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teac A-H300mkII you will learn all the available features of the product, as well as information on its operation. The information that you get Teac A-H300mkII will certainly help you make a decision on the purchase.
If you already are a holder of Teac A-H300mkII, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teac A-H300mkII.
However, one of the most important roles played by the user manual is to help in solving problems with Teac A-H300mkII. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teac A-H300mkII along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
