Instruction/ maintenance manual of the product SI-300 TDK
Go to page of 2
P PRODUCTS 1101 Cypress Creek R oad Cedar P ark, T exas 78613, USA 1-512-258-9478 FAX 1-512-258-0740 Data Sheet SI-300 Sy st em Inter face Product Overview Multi-Purpose Solution The TDK RF Solutions SI- 300 controller is a multi-purpose sy stem interface designed for manual or computer controlled EMC test systems.
P PRODUCTS To learn more about TDK RF Solutions’ wide range of inno vative products and services visit www.tdkrfsolutions.com © Copyright 2004 TDK RF Solutions Inc.
An important point after buying a device TDK SI-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TDK SI-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TDK SI-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TDK SI-300 you will learn all the available features of the product, as well as information on its operation. The information that you get TDK SI-300 will certainly help you make a decision on the purchase.
If you already are a holder of TDK SI-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TDK SI-300.
However, one of the most important roles played by the user manual is to help in solving problems with TDK SI-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TDK SI-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
