Instruction/ maintenance manual of the product DM-3200 Tascam
Go to page of 4
I F- A V /D M A v iom Pro 1 6 A-Net Inter f ace Card D01106120A Introduction Thank you for purchasing the T ASCAM IF-A V/DM A viom Pro16 A-Net Interface Card. This card allows your T ASCAM Digital Mixer to feed monitor audio to any number of A viom Pro16 A-Net devices such as the A-16II Personal Mixer .
2 T ASCAM IF-AV/D M I F- A V /D M A v iom Pro 1 6 A-Net Inter f ace Card A-16D Pro A-Net Distributor • A V -P2 Output Module • Connecting Pro 1 6 devic es W ith the IF-A V/DM card properly installed and congured, you can now connect Pro16 monitoring and audio networking devices.
I F- A V /D M A viom Pro 1 6 A- Net Interface Card T ASCAM I F-AV/D M 3 NOTE Using the A-Net out connector of, e.g. a A-16II Personal Mixer to extend the signal does not supply power to the additional units, which must be powered individually .
I F- A V /D M A viom Pro 1 6 A- Net Interface Card 1 Use the POD 4 knob to select the output source group fr om the SOURCE SELECT at the right of the screen. Options for each of the outputs in the output source gr oup selected here are shown the OUTPUT SELECT section on the left of the screen.
An important point after buying a device Tascam DM-3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tascam DM-3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tascam DM-3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tascam DM-3200 you will learn all the available features of the product, as well as information on its operation. The information that you get Tascam DM-3200 will certainly help you make a decision on the purchase.
If you already are a holder of Tascam DM-3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tascam DM-3200.
However, one of the most important roles played by the user manual is to help in solving problems with Tascam DM-3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tascam DM-3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
