Instruction/ maintenance manual of the product CD-A700 Tascam
Go to page of 17
» CD - A 7 0 0 Compact Disc P la yer/ Re verse Cassette Dec k 3D0027500A D This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
_ 2 _ IMPORT ANT SAFETY INSTRUCTIONS CA UTION: O Read all of these Instructions. O Save these Instructions f or later use. O Follow all W arnings and Instructions marked on the audio equipment. 1) Read Instructions — All the safety and oper ating instructions should be read before the product is oper ated.
_ 3 _ SAFETY INFORMA TION O CAUTION O ACHTUNG O OBSERVERA O ADV ARSEL This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product.
_ 4 _ Before Use O Choose the installation location of your unit carefully . Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibra- tions and excessive dust, heat, cold or moisture. Keep away from such sources that hum, such as transformers or motors.
_ 5 _ O Before connection, turn off all compo- nents and pay special attention to left (L) and right (R) channel indications. O Read the owner's manual of each com- ponent you intend to use with this unit.
_ 6 _ Name of Each Control 1 POWER switch 2 REMOTE SENSOR 3 Multi-function display window a REPEA T indicator b Auto space indicator (A. SP ACE) c DELETE indicator d T ime mode indicator e Program ind.
CD Player ∑ Music search using SKIP but- tons ( Ú / Æ ) The beginning of any track can be easily located using the Ú / Æ SKIP buttons. This operation is indicated clearly in the TRACK display . O This operation is possible even in the Program Playback mode.
∑ T o display the total program time In the Program mode, press the TIME but- ton to display the total program time. Pressing the TIME button again will return the CD player to the Program mode. ∑ T o review the program contents 1. Press the CHECK button in the Program mode.
_ 9 _ The repeat function allows repeat playback of any single track, the entire disc, or any desired portion on the disc designated by two (start and end) points. O The repeat functions can be released by pressing the repeat button again. ∑ T o repeat one track (Single Repeat mode) 1.
The time counter shows various time read- outs, as follows. 1 T otal disc playback time After the disc tray is closed with a disc loaded, the total disc playback time and total number of tracks on the disc are displayed. 2 Elapsed time display When playback begins, the elapsed time of the track being played is displayed in minutes and seconds.
_ 11 _ 1. Press the POWER switch ON. 2. Set the REV MODE switch to the required tape travel mode. 3. Load a pre-recorded cassette with its open edge facing down and side A fac- ing toward you. 4. Select ON/OFF of the DOLBY NR system. 5. Press the ” or ∏ button to start play- back.
_ 12 _ Y ou can change the tape speed during playback, allowing to change the pitch of the reproduced sound. By turning the PITCH CONTROL to the right, the tape speed becomes faster , resulting in a higher pitch. By turning it to the left, the tape speed becomes slower , resulting in a lower pitch.
Using the CD SYNC function, a CD-to-tape copy can be done easily and simply . 1. Load a compact disc. 2. Load a recordable cassette. 3. Select ON/OFF of the DOLBY NR system. O In the CD SYNC mode, the INPUT level control has no effect, as the recording level is automatically adjusted internally .
The unit has a timer controlled function. This lets you start playback or recording operations at any desired time when an optional audio timer is used. ∑ T imer playback of CD or cassette 1. Connect the unit and your stereo system to an audio timer as shown in the dia- gram.
Problem Probable cause Remedy General No power when POWER is pressed. Power plug not inserted securely . Plug in securely . Hum. Pin-cord plug not connected securely . Re-connect plug securely . Noise in tuner . T oo close to tuner . Keep a reasonable distance between them or switch off the power of this unit.
CD player section (Audio) Number of channels: 2 Frequency response: 20 - 20,000 Hz ± 0.5 dB Signal-to-noise ratio: 90 dB T otal harmonic distortion: 0.02% (1 kHz) Wow and flutter: Unmeasurable (quartz accuracy) Channel separation: 75 dB Pitch control: Approx.
PRINTED IN CHINA 0799U . M-1529A TEA C CORPORA TION 3-7-3, Nakacho , Musashino-shi, T okyo 180-8550, J apan Phone: (0422) 52-5082 TEAC AMERICA, INC . 7733 T elegraph Road, Montebello , California 90640 Phone: (323) 726-0303 TEAC CANAD A L TD . 340 Brunel Road, Mississauga, Ontario L4Z 2C2, Canada Phone: 905-890-8008 TEAC MEXICO , S.
An important point after buying a device Tascam CD-A700 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tascam CD-A700 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tascam CD-A700 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tascam CD-A700 you will learn all the available features of the product, as well as information on its operation. The information that you get Tascam CD-A700 will certainly help you make a decision on the purchase.
If you already are a holder of Tascam CD-A700, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tascam CD-A700.
However, one of the most important roles played by the user manual is to help in solving problems with Tascam CD-A700. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tascam CD-A700 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
