Instruction/ maintenance manual of the product 318200506 Tappan
Go to page of 20
Recycled paper ELECTRIC RAN GE READ AND SA VE THESE INSTRUCTIONS OWNER’S GUIDE 318200506 (010 8) Rev . B P/N 318200506 (0510) Rev . C.
2 Register Y our Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to Electrolux Home Products North America. © 2001 White Consolidated Industries All rights reserved Product Registration Thank you for choosing this appliance.
3 IMPOR T ANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. This guide contains important safety symbols and instructions. Please pay special attention to these symbols and follow all instructions given.
4 IMPOR T ANT SAFETY INSTRUCTIONS (continued) IMPORT ANT INSTRUCTIONS FOR USING YOUR COOKTOP • Know which knob controls each surface heating unit. • Use Proper Pan Size — This appliance is equipped with one or more surface units of different sizes.
5 Installation Instructions Installation and service must be performed by a qualified technician. IMPORT ANT : Save for the local electrical inspector’ s use.
6 Installation Instructions (continued) T o level the range: 1. Use a 1-1/4” open end key or an adjustable wrench to equally unscrew the four leveling legs two to three turns each. 2. Install an oven rack in the center of the oven. 3. Move the range to its final position, then put a spirit level on the rack to check for levelness.
7 Setting Surface Controls 1. Place the pan on the surface element. 2. Push in and turn the surface element control knob to desired setting. 3. The surface signal light will glow when one or more elements are turned on. Always turn the element off before removing the pan.
8.
9 Indicator Light Some models have an indicator light for each heating unit, other models have an indicator light for each pair of heating units. The indicator light glows as soon as a heating unit is turned on. Check if the indicator light glows when the control knob of the individual heating unit is turned on.
10 Open door to the “Broil Stop” position when broiling. Broiling Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven. Preheating Preheating is suggested when searing rare steaks. (Remove the broiler pan before preheating.
11 SURFACES CLEANING AGENTS INSTRUCTIONS Porcelain Enamel Mild Cleaners or soap-filled steel Use a damp sponge or dampened soap pad, (Cooktop, wool pads rinse and dry Surface under cooktop) Insert – Control panel Hot, soapy water or cleaner Use a clean, soapy , dampened cloth or paper towel, cream remove so il and dry .
12 Cleaning the Appliance (continued) Porcelain Enamel Cooktop Cleaning Instructions. DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the cooking surface. Before Cleaning the surface cooktop, be sure the controls are turned to OFF and the cooktop is cool.
13 Cleaning the Appliance (continued) Cleaning the Regular Oven (Non self-clean oven) Make sure the oven is cool and that all control knobs are at OFF “ ” position. Cleaning the oven is a lot easier when the door is removed. 1. Remove the oven door; see “ T o Remove and Replace Oven Door” section in this manual.
14 Cleaning the Appliance (Continued) What to Expect During Cleaning While the oven is in operation, the oven heats to temperatures much higher than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed.
15 T o Remove and Replace Storage Drawer (some models) T o Remove the Drawer 1. Pull the empty drawer out to the roller guide stop. 2. Tilt the drawer up and pull it out over the rollers. T o Replace the Drawer 1. Insert the rear end of the drawer into the opening.
16 A void Service Checklist Before you call for service - read this Y ou may save the cost and inconvenience of an unnecessary service call by first reviewing this easy to use Avoid-Service Check List of the most frequently encountered situations that are not the result of defective workmanship of materials.
17 A void Service Checklist (continued) PROBLEM RANGE DOES NOT OPERA TE Surface elements do not heat. Oven light does not work. Control panel light does not oper - ate (some models). SURFACE UNITS Surface elements too hot or too cold. Liquids boil at LOW setting of sur - face units.
18 A void Service Checklist (continued) PROBLEM POOR BAKING RESUL TS Baked foods too done or not done enough. Baked foods not evenly browned and/or raised. Baking time too long. Oven steaming. BROILING Oven smokes excessively during broiling. POSSIBLE CAUSE/SOLUTION Actual oven temperature and cooking times may vary from recipe or box instruction.
19 PROBLEM Self-clean cycle does not work. Soil not completely removed after self-cleaning cycle. POSSIBLE CAUSE/SOLUTION Follow steps specified in this manual for appropriate settings of controls. Door was not closed properly . Close door and start appropriate clean cycle again.
Y our appliance is covered by a one year limited warranty . For one year from your original date of purchase, Electrolux will pay all cost s for repairing or replacing any part s of this appliance tha.
An important point after buying a device Tappan 318200506 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tappan 318200506 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tappan 318200506 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tappan 318200506 you will learn all the available features of the product, as well as information on its operation. The information that you get Tappan 318200506 will certainly help you make a decision on the purchase.
If you already are a holder of Tappan 318200506, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tappan 318200506.
However, one of the most important roles played by the user manual is to help in solving problems with Tappan 318200506. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tappan 318200506 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
