Instruction/ maintenance manual of the product TS8 Tannoy
Go to page of 10
.
OPERATIONAL OVERVIEW 1 Introduction 2 Electrical Connection 3 Installation ® Fitting of feet ® Connecting to your system ® Positioning ® Auto Power / Sleep Function ® Overload Protection ® Clean.
OPERATIONAL OVERVIEW 2 Electrical Requirements IMPORTANT A mains cable is supplied with an IEC moulded socket at one end and a moulded mains plug at the other end. Where the moulded plug is fitted with a mains fuse, always replace with the same 5A rated fuse.
OPERATIONAL OVERVIEW 2 Electrical Requirements FUSE PROTECTION An additional mains fuse is provided in the IEC power inlet on the back of the loudspeaker, which can only be removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see Specifications or refer to rear panel).
OPERATIONAL OVERVIEW 3 Installation FITTING OF FEET Screw the four cones into the inserts on the base of the cabinet. Spikes and lock nuts are provided to provide stability when used on a carpet. For use on a wooden floor, the spikes should be inverted.
OPERATIONAL OVERVIEW 3 Installation 2 CHANNEL STEREO Operation is basically the same as above, except the LFE switch should be set to OFF, and the XOVER FREQ. control must be set to suit your main speakers. If you know the lower roll-off frequency of your speakers (as given in the manual), set the control to this value as a starting point.
OPERATIONAL OVERVIEW 255 292 280 255 4 TS8 Equipment Overview 8.
OPERATIONAL OVERVIEW 286 323 286 288 4 TS10 Equipment Overview 9.
OPERATIONAL OVERVIEW 5 Technical Specification TS8 TS10 Output Power 200W RMS 300W RMS Low Frequency Response (-6dB) 32Hz 29Hz Limit for usable output 18Hz 16Hz Inputs 2 x line level phono 2 x line le.
Tannoy Loudspeakers are designed and manufactured in Great Britain by: Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, North Lanarkshire, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Tannoy North America Inc, Suite 1.
An important point after buying a device Tannoy TS8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tannoy TS8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tannoy TS8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tannoy TS8 you will learn all the available features of the product, as well as information on its operation. The information that you get Tannoy TS8 will certainly help you make a decision on the purchase.
If you already are a holder of Tannoy TS8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tannoy TS8.
However, one of the most important roles played by the user manual is to help in solving problems with Tannoy TS8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tannoy TS8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
